Ya, that’s one swol knob…The bolt knob is kinda ugly but everything else looks good. Might have to put an order in
Ya, that’s one swol knob…The bolt knob is kinda ugly but everything else looks good. Might have to put an order in
As a guy that bought one....yeah, it's a bit ridiculous. I may eventually switch it out for a smaller one.Ya, that’s one swol knob…
Nice! I have the ball knob on mine too, love it. I have my CDG fitted with a PVA 6.5 CM barrel and AIAW mags. Shoots fantastic and runs so smoothly and solid. I’m excited to see what Ted cooks up next for a hunting action.I have a few of these actions on hand at the moment. I chambered up a 20” Proof Sendero in 6.5 Creedmoor for my brother this summer and dropped it into a Manners PH mini chassis. It required very minor mods to the chassis but otherwise was good to go. The rifle absolutely hammers. He used it to kill a big 5 point bull a few ago at 820 yards. The AW mags are really nice and functioned perfectly right from the start.
I was planning to build a 7 PRC for myself on a CDG using the Hawkins Hunter mags. But the long action CDG will only work with AICS magazines. I don’t want those so I now have a couple long actions that will be for sale when I get some time to list them.
I really like the ball style bolt knob these actions.
I’m not a chassis fan, as you can probably guess. Are there any stocks where the ejection port inletting actually lines up with the receiver port? That mismatch, functional or not, would drive me nuts.Sorry, I missed your question, the CDG actions work just fine in standard stocks. We put my brothers rifle in a mini chassis because Manners happened to have that one in stock, skipping the 6-12 month wait was pretty attractive…
I admittedly have limited experience with DBM’s. I have one that is factory on a Win M70 and no issues since it’s a factory design. And I built/assembled a rifle for a buddy with a Hawkins Hunter DBM and he likes it but the whole thing rattled and felt cheap to me. I hated it. Guess I’m too much of a traditionalist. Your perspective is opposite of my impression. You hear all the time about XYZ clone not working with aics or aw, yada yada, but I don’t seem to hear about BDL’s not working, ever. Unless somebody is trying to load long coal. I could be wrong on that, just not what I’ve seen/heard. Yes, they might need some minor tweaking to the mag spring from time to time, but I’ve never had any trouble with any BDL mag, given a saami length cartridge and a receiver designed for same.I used to be a BDL only guy but I’ve seen so many issues with them I finally switched to DBM’s. The detachable mag setups are far more reliable and usually don’t require any fiddling to make them work, I can’t say the same for BDL’s.
Yes, I’m sure it would be an easy job to modify that inletting, until you grind through the carbon fiber shell and are into the filling. At least that would be my fear.The manners LRH and PH have a lower stock line that lines up with the bottom of the ejection port so they are basically a universal fit. Most of these stock companies are now offering an inlet specifically for the CDG action so the ejection port cutout will line right up. I agree though, that mismatch doesn’t really jive with my OCD. It’s a relatively easy job to modify the stock to match with basic hand tools.
I recently built a 6.5 PRC on a Remington 700 with a BDL and Wyatt’s mag box. It took several hours of making adjustments to finally get it functioning properly. I would bet my last dollar that the Hawkins Hunter setup would have fed from the get go. The mags do rattle until you load them, once loaded the spring pressure holds them in place and no rattle so it’s been a non issue for me.
I have a few of these actions on hand at the moment. I chambered up a 20” Proof Sendero in 6.5 Creedmoor for my brother this summer and dropped it into a Manners PH mini chassis. It required very minor mods to the chassis but otherwise was good to go. The rifle absolutely hammers. He used it to kill a big 5 point bull a few ago at 820 yards. The AW mags are really nice and functioned perfectly right from the start.
I was planning to build a 7 PRC for myself on a CDG using the Hawkins Hunter mags. But the long action CDG will only work with AICS magazines. I don’t want those so I now have a couple long actions that will be for sale when I get some time to list them.
I really like the ball style bolt knob these actions.
I’m a fan of the hourglass design, I like running the action by lifting up the bolt with my trigger finger so having that groove to keep it out on the end of the bolt handle helps.Nice! I have the ball knob on mine too, love it. I have my CDG fitted with a PVA 6.5 CM barrel and AIAW mags. Shoots fantastic and runs so smoothly and solid. I’m excited to see what Ted cooks up next for a hunting action.
It’s generally just two, AICS and AIAW.I still don’t understand all this aics aiw XYZ and abc magazine mumbo jumbo. Too many options and too many potential problems. BDL just works without the fuss and rattletrap plastic things that get lost.
They were designed to fit any Remington 700 stock or chassis with only minor fitment for the trigger hanger and ejection port. At this point most stock makers will have a specific cut for it now.Were these ARC actions built specifically to be mounted into chassis?
The rattle is due to the clearance so that the empty magazine drops free even if dirt or dust gets into the mag well. I have some that don’t rattle when they are empty, they are finicky to lock up and don’t drop free when you release them so you have to pull them out.Yes, I’m sure it would be an easy job to modify that inletting, until you grind through the carbon fiber shell and are into the filling. At least that would be my fear.
And yes, BDL‘s, and Wyatt’s boxes can be trouble, hence my comment earlier about keeping stuff factory length. The only BDL I’ve ever had trouble with was also with a Wyatts box and I had to go to a Center feed, thus losing a round of capacity, in order for it to work. But with SAAMI stuff, not an issue. As for the Hawkins DBM and the rattle, yes, I know it stops once you have spring pressure from some rounds in the mag, but there’s that OCD thing again. I’m of the mindset that nothing on a firearm should rattle, ever. Rattles are bad in machinery, imo. Rattling means something doesn’t fit together properly, or is loose when it should be tight. It just bothers me. Hawkins has also been rather aloof in their communications and videos about the issue. They know of it and rather than offering suggestions, or striving for improvement, they make it seem like the consumer who complains about it is an idiot.
Do you know for sure manners will inlet for the CDG specifically? I intend to email them, but figured you may know. And in the off chance they don't get, you're saying if I order, say a PH in rem 700 long action, it will fit my LA CDG?Sorry, I missed your question, the CDG actions work just fine in standard stocks. We put my brothers rifle in a mini chassis because Manners happened to have that one in stock, skipping the 6-12 month wait was pretty attractive…
The Pro Hunter and LRH will fit any clone as they lowered the sides to not interfere with the ejection port. Here it is in a short actionDo you know for sure manners will inlet for the CDG specifically? I intend to email them, but figured you may know. And in the off chance they don't get, you're saying if I order, say a PH in rem 700 long action, it will fit my LA CDG?
Sent from my Pixel 6 Pro using Tapatalk
Which stock is that?The Pro Hunter and LRH will fit any clone as they lowered the sides to not interfere with the ejection port. Here it is in a short action
View attachment 620912
I believe that's the pro hunterWhich stock is that?