Maven RS1.2 2.5-15x44 new model

That is a 1.20" shank blank vs a 1.135" tikka prefit, so maybe you are seeing the 0.0325" difference?
Your barrel is a Tikka prefit. His barrel isn't. If you zoom into the photo, I can see just a touch of shank diameter thats bigger than the Tikka nose, so he's using a proof blank that wasn't original setup for Tikka tennon OD. Its either 1.200 or it was turned down a touch. I could be totally wrong, but thats what I'm seeing in the pictures.

Gotcha! Thank you guys for the clarification 👌🏻👌🏻
 
To combat the really freely spinning turret I put a 0.053" Oring under the elevation turret.
Factory looks ~ 0.037" (probably 1mm)

Turret is now a tight fit and won't turn as freely/easily. Closer to an SWFA or Tenmile turret.
If you can score a 0.050" turret I suspect that would be just right. But this is good enough for the girls I go out with

Shared pics of factory oring thickness, groove OD, and turret ID.
 

Attachments

  • IMG_2975.jpeg
    IMG_2975.jpeg
    510.8 KB · Views: 52
  • IMG_2976.jpeg
    IMG_2976.jpeg
    517.5 KB · Views: 52
  • IMG_2974.jpeg
    IMG_2974.jpeg
    564.9 KB · Views: 52
To combat the really freely spinning turret I put a 0.053" Oring under the elevation turret.
Factory looks ~ 0.037" (probably 1mm)

Turret is now a tight fit and won't turn as freely/easily. Closer to an SWFA or Tenmile turret.
If you can score a 0.050" turret I suspect that would be just right. But this is good enough for the girls I go out with

Shared pics of factory oring thickness, groove OD, and turret ID.
Is this like my loss of innocence where if I stare at it long enough I'll figure out where to stick it?
 
Back
Top