Looking for Tikka 243 8 twist pet loads

[MT-nuffgun]

Just received a tikka superlite .243 win with the updated 8 twist barrel. For the guys who have been loading for this particular rifle, what bullets are you finding that the 8 twist likes? I was going to try 108 eldm first then move onto 103 eldx or 95 TMK next if the 108’s don’t pan out. The two powders I have on hand are H4831sc and Staball 6.5.

 

[Jimbee]

Here's 6.5staball and 108s. I'd have to look for charge weight.

 

[BlackHillsShooter]

Interested in this myself. Just started with my 243. Loaded 103ELDM with 39grains H4350. Around an inch. Sorry, that's the only powder i have on hand for it.

I bought a box of 108s the other day so will be toying with those too. Will post results.

My attempts with 95gn Nosler left a lot to be desired but like i said, I'm just starting.

 

[5MilesBack]

I know a few guys that are successfully using 42gr of H4350 with the 108gr ELDM's seated at 2.80" in the 1:8" barrels, but I don't know anybody that has the Superlite. I also want to try some H1000 loads as well.

 

[Castle Rock]

41.5 / 4350 / 108 ELDM

 

[83cj-7]

Just a warning, H4350 will eat up barrel life. Slower, cooler burning powders will drastically improve the life of your .243s. My friend and I are well versed in the ways of the kung243foo.

 

[NWBLKTAIL]

Just a warning, H4350 will eat up barrel life. Slower, cooler burning powders will drastically improve the life of your .243s. My friend and I are well versed in the ways of the kung243foo.

What powders do you prefer?

 

[83cj-7]

We are stuck on H1000. My ES is usually under 5fps. My buddy and I both shoot 105s. He shoots the Berger Hybrid and I shoot the 105 A-max. Both 8 twist Krieger barrels.

 

[NWBLKTAIL]

Okay I just had a Mcgowen 1-8 spun up on a M70 PF, I was pretty set on trying H4350 with a 108eldm. I have H1000 maybe I’ll give that a shot as well see if it shoots.

 

[NWBLKTAIL]

41.5 / 4350 / 108 ELDM

This where I thought I was gonna land

 

[sveltri]

In my 243 AI, 4831SC significantly outperformed H1000 with the 108 ELD-M.

 

[HighUintas]

In my 243 AI, 4831SC significantly outperformed H1000 with the 108 ELD-M.

Accuracy, speed, both?

 

[HighUintas]

I use both h1000 and h4350 with the 108. They both shoot well.

 

[Castle Rock]

This where I thought I was gonna land

With better brass you probably could go up an extra half or full grain but this stuff is just shitty federal 308 necked down and I have a bucket full of it and it stays where it lands

 

[justin davis]

We are stuck on H1000. My ES is usually under 5fps. My buddy and I both shoot 105s. He shoots the Berger Hybrid and I shoot the 105 A-max. Both 8 twist Krieger barrels.

How fast are they going?

 

[83cj-7]

I run 3050fps with a 25” barrel. I have been up to 3150, but it was very compressed.

 

[gman82001]

My new superlight absolutely hated factory precision hunter 95 eldm I tried loading some with 4895 and 4831sc still was only around 2.5” group.

I had some factory fusion on hand tried it and it was well under 1” so I knew the gun could shoot. I tried the federal loaded with 95 bergers and it shot well so I picked up a case and a box of just bullets to find a load. I also grabbed a bottle of h 4350 and it shot at least as well maybe better than the factory so I know I’m good to go with the rifle.

I picked up some 105 eldm bullets so I can play with them this winter.