Lever Action anyone?

[keystone112]

Never know with ruger.

Didnt they just turn out a 10mm levergun?

You’re right. They did

 

[Steve300xcw]

Rugers always been one to toss out random calibers and whatnot. Wouldnt surprise me to see a 444 or anything else get turned out one of these days.

 

[Bluefish]

I get the feeling that Marlin (Ruger) isn’t interested in adding new or less common cartridges. The reason I say that is I’ve read somewhere that the 444 Marlin will not be brought back. That’s unfortunate because this one is excellent and in my opinion much better than the 45-70.

The whole purpose of the 444 was to replace the 45-70 as brass wasn’t available. Now the 45-70 is more popular again. They are so close in performance, the only reason to go with the 444 is its slight better for lighter sonic loads. The 45-70 is far more versatile.

Also ruger just make a 1894 in 10mm. So they obviously are not against doing something new. The 360 bh would simply require taking the 30-30 action and fitting a 35 cal barrel instead of 30. If I could find someone to make a barrel and do the swap I would do it myself.

 

[onlybrowning]

JES would rebore a .30-30 to .360 BH for you.

 

[Bluefish]

JES would rebore a .30-30 to .360 BH for you.

Problem is a 360 bh won’t clean up a 30-30 chamber. Needs a new barrel to do it right.

 

[RyoTBC]

I saw they released a take down version now. I'm tempted.

I think I'd get it in 460 just because I suppress everything and I have a 46 cal suppressor. And no one makes a 50 cal suppressor without rating it for 50bmg and it being way to big.

A 460 with a 18 inch barrel and fiber front sight will be my next rifle.

Just a heads up, if you buy a bighorn and go to shoot factory ammo.. re crimp the rounds. They are meant to be shot out of a revolver so once you start loading up a full tube magazine they can push the bullets into the cases of some factory rounds

 

[onlybrowning]

Problem is a 360 bh won’t clean up a 30-30 chamber. Needs a new barrel to do it right.

Oh no kidding, I didn’t realize that.

 

[NDGuy]

 

[Sizzler]

I love all the custom lightweight rifle set ups that are found here on Rokslide. I like to hunt with lever actions. Any other lever action hunters out and about?

Just got to Maine with my 45/70 trapper for bear.

 

[Ozarkansas]

After a total of about an hour on the stand, I have Two more does down with my 45/70 XLR. First one ran about 75 yards and the second dropped on the spot (I don’t have a photo of the second).

 

[Good Stuff]

View attachment 955835View attachment 955836View attachment 955837

After a total of about an hour on the stand, I have Two more does down with my 45/70 XLR. First one ran about 75 yards and the second dropped on the spot (I don’t have a photo of the second).

She looks full of Ticks?
How far is the 45/70 good for Whitetail?

 

[Ozarkansas]

She looks full of Ticks?
How far is the 45/70 good for Whitetail?

That’s just flies, she went down in a cow pasture with lots of flies around.

And it’s good on them as far as I can comfortably hit them, which with this gun is probably 200ish yards

 

[henkel19]

This is my Winchester 94 30-30 that was passed down to me from my grandpa. It’s a 1955 model and it had a weaver 1.5 power mounted on it but I’ve since removed it because the side mount is just an awkward sob.
I’ve taken several deer with it including my first buck. I still carry this gun on drive days now, I t’s so light and handy.
View attachment 801184

I put a pearsons tac rail on mine (from 1952) and mounted a little vortex scout scope ahead of the ejection port. It works well and is no-drill so you won't have to do anything permanent.

 

[henkel19]

These also look 'wrong' but I'm looking forward to getting my hands on one.

A guy in front of my in line at the local sporting good store was buying the Homesteader in 9mm and it looked like a really fun gun.