Let’s see your Remington 700 builds

[wrightjr]

Nice looking set up, what are the specs?

 

[7MMMAG]

Nice looking set up, what are the specs?

M700 Magnum Action
Remington Custom Shop Floor plate
Custom 24” 7mm barrel. 1:9
Oversized recoil lug
Custom tapered 4 port brake
Timed, welded & threaded bolt handle
Fluted bolt and knob
LRI upgraded ejector & spring
H-S bedded stock
0 MOA rail with Warne rings
Trijicon illuminated 3-9
Atlas bipod rail
Harris QD bipod with fabricated spikes
Barrel, BDLand brake are cerekoted graphite black and bolt assembly is done stainless

 

[FLS]

700 ADL 25-06 Built by Apache Machine and Custom. 700 C prefix action blueprinted and trued.24” Bartlein #3 1-10 Twist. HS Stock. Trigger tech trigger. It’s a laser, just like everything else Steve has built for me.

 

[FLS]

Factory 110 ELDX out of the rifle above. Less than 10 rounds down the tube when I shot that group. Shoots a little better with 115 VLDs over H1000. 1” dot.

 

[FLS]

This one started off as a 5r in 308. Action was trued and rebarreled with. 24" Kreiger Sendero profile 1-8" twist chambered in 6.5 Creedmoor. HS stock, HS bottom metal, and Trigger Tech trigger. Shoots in the .2 with 140 hybrids and 130 Gamechangers. I've shot a lot of local matches and killed a lot of game with this rifle. Another laser build by Apache Machine and Custom. It's had a McMillan M5 and an XLR chassis. Back in the original HS stock. I've shot the hell out of this rifle.

 

[Hill Difficulty]

700 action on its 3rd barrel. Nothing better for blind mags and COAL length. This one has a K&P cut rifle barrel chambered in 240W.

Edit for Creed what?'s question:
Does anyone have any advice on finding a Remington 700 action cheap, like $400 range?

Yes, can find for around $450 if you stay on top of popular forum classifieds.

Advice: The big problem with a 700 action is they're mass produced and often a bit crude, so you might need to pay another $400 + time/trouble to get the slop out of them before adding a fancy new barrel.

List of considerations based on rifle in photo:

• square the receiver
• square the bolt face
• lap bolt lugs
• replace firing pin assembly
• most receiver tops aren't even, so bed the scope rail or base
• striker pin bushing thread into bolt face
• dress up with bolt knob/flute bolt/paint/pic rail

Once you add all of that up, the price for a Defiance Tenacity or Bighorn Origin action starts making sense. Can get a new-in-box Origin for $800. The action is stainless, salt-nitride treated + includes pic rail, fluted bolt, and bolt knob. There is nothing to do to an Origin. Tenacity ends up $300 more because they cost a bit more + must pay additional to treat the bolt steel and receiver. Hope this helps!

 

[Ckoenig]

HCA 7MM with Nightforce NX8 4-32

 

[FLS]

I've done a bunch over the years, most of these I've sold but here are a few.
7MM-08 built by Jon Beanland:

7MM-08 built by Accurate Ordnance:

7MM-08 built by Karl Feldkamp & Jon Beanland, should of kept this one

What barrel profile is the camo stocked rifle?

 

[PRC_GUY]

7 LRM
Defiance AntiX LA
Benchmark Carbon fiber
Stocky stock sport
Trigger tech trigger
Leupold VX 6
8lbs

 

[Oregonmuley]

What barrel profile is the camo stocked rifle?

That is a Bartlein 2b contour finished @ 22.5", probably my current favorite for a lighter weight build.

 

[xsn10s]

That is a Bartlein 2b contour finished @ 22.5", probably my current favorite for a lighter weight build.

The more I look at 7-08 the more I like it as an Oregon general purpose hunting rifle.

 

[FLS]

That is a Bartlein 2b contour finished @ 22.5", probably my current favorite for a lighter weight build.

My 25-06 is a #3 and i wish it was a 2B.

 

[Oregonmuley]

My 25-06 is a #3 and i wish it was a 2B.

Bart contours tend to run on the thicker side, their #3 is more like other #4's but they do make good barrels IMHO.

 

[Oregonmuley]

The more I look at 7-08 the more I like it as an Oregon general purpose hunting rifle.

Yup, its about all I shoot these days and it seems to work just fine

 

[mi650]

I bought this one lightly used, and have changed everything except the BA and DBM.

GAP Custom
Remington 700 Action, .308
Badger M5 Detachable Magazine and Trigger-guard
24” Fluted Bartlein Barrel Cerakoted OD Green with threaded muzzle
YHM Phantom mount
Cadex Nuke Evo stock
TriggerTech Special 2 stage flat
Leica PRS 5-30x56 PRB
MKM lens caps,
Harris bipod

Traded for this one when it was new/unfired, and again, changed nearly everything.

RW Snyder BCR
Remington 700 Action, .308
spiral bolt, oversize bolt handle
24" Bartlein 1/10 M24 barrel
Badger Ord M5 trigger guard
Timney CE 2-stage trigger flat
Magpul Pro 700 stock black
Magpul Bipod
PRS 5-30x56 PRB
MKM lens caps
YHM Phantom mount

 

[Timplant]

Two questions. Can someone post a picture of a mesa with a barrel nut on the barrel wanna make sure it will fit in the stock.

Also, why do most of these directly threaded barrels and some have a remage nut. Is that just based off proper head spacing? Or the difference in smith with a lathe and a prefit. Thanks

 

[HandgunHTR]

Two questions. Can someone post a picture of a mesa with a barrel nut on the barrel wanna make sure it will fit in the stock.

Also, why do most of these directly threaded barrels and some have a remage nut. Is that just based off proper head spacing? Or the difference in smith with a lathe and a prefit. Thanks

I don't have a pic of mine handy, but I have a 260 Remington Remage build with a PVA barrel nut. You will need to do a bit of modification to get it to fit perfectly, but it isn't hard.

 

[hicountry1]

Mine is an original 700 Ti in 280.

Had Dan Coffin spin a Lija bbl, dupe factory contour, fluted, and bedded into a Micky Remington Hunter with edge fill.

With the scope, 7.5lbs ready to roll.

And of course like all Dan's rifles, shoots lights out.

 

[ridgeline]

R700, 22 Creedmoor, Pac-Nor S/S super match 1:7" 3 groove, #3 profile, 22"
Mcmillan Game Hunter, AICS DBM inlet.
Trigger tech Special.

 

[ridgeline]

R700, 243AI, 1:8" S/S fluted #3 @22"
Manners EH2 AICS DBM inlet.
Timney Calvin Elite