Is the 300 WSM Dying?

Joined
Jan 23, 2014
Messages
550
Location
John Day, OR
I built a 300 wsm off a Tikka action 2 years ago. Pretty much like most guys that decide to rebarrel a Tikka to a 300 wsm or 7 saum. Seems to be the popular route these days.

All I can say is it’s a hammer. I’m shooting 212 ELD-X’s at 2820 fps with an Ultra 7. Super accurate and was easy to tune. I strictly reload though. I stocked up as the shitstorm was brewing around covid and it was easy to find 200 pieces of Norma brass then. I also use H4831sc which isn’t impossible to find. The large rifle magnum primers are the unicorn piece in my reloading room. Down to my last 500 so I’m being a little more conservative now with those.


Sent from my iPhone using Tapatalk
 
OP
slowelk

slowelk

WKR
Joined
Aug 17, 2017
Messages
1,781
I built a 300 wsm off a Tikka action 2 years ago. Pretty much like most guys that decide to rebarrel a Tikka to a 300 wsm or 7 saum. Seems to be the popular route these days.

All I can say is it’s a hammer. I’m shooting 212 ELD-X’s at 2820 fps with an Ultra 7. Super accurate and was easy to tune. I strictly reload though. I stocked up as the shitstorm was brewing around covid and it was easy to find 200 pieces of Norma brass then. I also use H4831sc which isn’t impossible to find. The large rifle magnum primers are the unicorn piece in my reloading room. Down to my last 500 so I’m being a little more conservative now with those.


Sent from my iPhone using Tapatalk

I would like to find that same brass and powder for this project.
 

B23

WKR
Joined
Aug 17, 2017
Messages
1,181
Location
NW
I sometimes wonder if it's Winchester's lack of supporting their products as much as anything.
 
Joined
Jan 15, 2022
Messages
12
Location
Fairbanks, AK
The ammo company’s didn’t make any 300wsm for like a year or so. Then federal did a run of fusion and Norma started making bondstrike. I haven’t seen a box on the shelves in my town in 3 years. I have to have it shipped to me from America.
 
Joined
Dec 1, 2020
Messages
568


 

BjornF16

WKR
Joined
Dec 12, 2019
Messages
2,678
Location
Texas

t_carlson

WKR
Joined
Nov 1, 2022
Messages
593
Location
Montana
I sometimes wonder if it's Winchester's lack of supporting their products as much as anything.

That’s EXACTLY what it is. Remington is bad about it too. I’m getting a little tired of finding a chambering and then getting a component scarcity a decade later.
 
OP
slowelk

slowelk

WKR
Joined
Aug 17, 2017
Messages
1,781



Core lokt should never be more than $30/box
 
Joined
Jan 23, 2014
Messages
550
Location
John Day, OR
We are getting closer to hunting season. Is anyone seeing more 300WSM?

deaa1c46e15fd875f052d5a506ca6b47.jpg



Sent from my iPhone using Tapatalk
 
Joined
Jan 23, 2014
Messages
550
Location
John Day, OR
that's 300WM no 300wsm, and Jesus 2753fps with a 180 in a 300wm is unbelievably slow it should be around 3050fps

Ha! Good point. I saw these when I searched for wsm ammo.
Seems as though it is tough to buy factory these days. Reloading components are not too hard to find.


Sent from my iPhone using Tapatalk
 

Leaf Litter

Lil-Rokslider
Joined
Sep 8, 2022
Messages
239
No shortage of 300 WSM on Ammoseek. Seems like there may not be as many options as 300 WM, but still available
 
Top