Is it all Leopolds

Joined
Mar 22, 2024
Messages
86
This post reads as it’s from someone who is in denial. It’s not that people don’t like leupold, it’s just that serious shooters don’t trust them.

There is a reason for the early BR crowd freezing scopes, and using external adjustments. It wasn’t because scopes were dependable.

All it takes for the non believers to be awakened, is to purchase a scope checker, and test their own stuff. No drop tests needed. The reason for very few doing this, is they already know the answer, but are in denial. They are financially or emotionally invested in junk gear.
The issue people take is that last part. Junk gear. You don’t like it/had a bad experience. That’s fine. But leupold has more match wins of every type of long range shooting over the years than any other brand. That doesn’t happen with junk. I like leupold. They’ve performed great for me from Alaska to Arizona out to 1200 yards and I prefer them to the nightforce and vortex stuff I’ve owned. The difference though is I don’t call vortex and NF junk gear. I liked the leupold glass better than the NF I had. I had a vortex fail on me. But those companies overall make incredibly good, top notch gear. My limited experience with them is anecdotal.
 
OP
N

Nards444

FNG
Joined
Aug 30, 2023
Messages
69
This has been covered in other threads, quite a few times. Others can probably speak to these points better than me, but fwiw. The slight variance in conditions mimics field situations, but apart from temperature and the exact substrate, they are pretty similar. Repeating the test 10x is impractical - it’s done on a volunteer basis with ammo costs donated by some RS members. Are you familiar with the testing procedures?
As I said above I have read them. And yes the variance mimics field conditions, the error here is though if the ground is say x amount harder and the temp is 30 degrees colder and the drop is done even half an inch higher it could trigger a fault one scope and maybe not another. While variance is good when testing one scope how it performs in different conditions, variance isn’t good when trying to compare it to others.

Actually testing this thousands of times is practical even 10 isnt good enough, that’s what manufactures do. But yes this is a guy on the side doing and spending his life doing this, it wouldn’t be practical for for him. However one test in uncontrolled conditions also makes the results interesting but impractical to come to a conclusion
 
Last edited:

Reburn

Mayhem Contributor
Joined
Feb 10, 2019
Messages
3,494
Location
Central Texas
The issue people take is that last part. Junk gear. You don’t like it/had a bad experience. That’s fine. But leupold has more match wins of every type of long range shooting over the years than any other brand. That doesn’t happen with junk.

Ford made 3.1 million pintos. People use junk for all kind of reasons. Doesnt mean its not junk.

keep using junk scopes. Everyone here is fine with it. Sooner or later it will probably cost you.
 
OP
N

Nards444

FNG
Joined
Aug 30, 2023
Messages
69
People are missing a critical element of the statistics in their insistence in a large sample size. if a scope has a 0.5% failure rate (so in “truly scientific” testing it would fail .5% of the time, or 5 times out of 1000) do you know what the calculated odds of having TWO tested scopes in a row PASS? It’s extremely high, and you would expect to require a huge number of tests to find even ONE failure. BUT, now calculate the odds of getting TWO consecutive failures in a row—it’s infinitesimally tiny, the odds are ridiculously low. So if you test 2 scopes and BOTH of them fail, statistically that is much, much, much, MUCH less likely than passing twice in a row. And if you did it three times in a row…well, with a truly low failure rate it simply would be a “more than one in a gazillion” fluke. So if you test a couple scopes and have multiple failures…you cannot quantify the failure rate, but you can say pretty confidently there is a problem. Statistically speaking the low sample size with very high failure rate is far more relevant than people are giving it credit for.

You know the saying “a good plan now is better than a perfect plan tomorrow”? The corollary to that is “some data now is better than perfect data tomorrow”.
I think like many of said we agree there is a problem. The real question is how big of a problem and does it matter? We will never know, because these test won’t give us that nor will manufactures.

What your saying is true but it’s also like saying I won the lotto while true, it doesn’t mean I can repeat it again statistically. Nor does it correlate to anybody else winning the lotto while.

Again. Great stuff and test. It’s just far from conclusive
 

fwafwow

WKR
Joined
Apr 8, 2018
Messages
5,662
L
As I said above I have read them. And yes the variance mimics field conditions, the error here is though if the ground is say x amount harder and the temp is 30 degrees colder and the drop is done even half an inch higher it could trigger a fault one scope and maybe not another. While variance is good when testing one scope how it performs in different conditions, variance isn’t good when trying to compare it to others.

Actually testing this thousands of times is practical even 10 isnt good enough, that’s what manufactures do. But yes this is a guy on the side doing and spending his life doing this, it wouldn’t be practical for for him. However one test in uncontrolled conditions also makes the results interesting but impractical to come to a conclusion
I don’t disagree with any of that. Unfortunately no manufacturers do any sort of testing that’s even close to what this is trying to accomplish. Some say they test for G forces (Tract - but I’ve never been able to find any details, and I think Leupold has a video of something like that, but short on info). If there are tests out there, I’m unaware of them.

So for me the tests fit the cliche of don’t let perfect be the enemy of good.
 
OP
N

Nards444

FNG
Joined
Aug 30, 2023
Messages
69
L

I don’t disagree with any of that. Unfortunately no manufacturers do any sort of testing that’s even close to what this is trying to accomplish. Some say they test for G forces (Tract - but I’ve never been able to find any details, and I think Leupold has a video of something like that, but short on info). If there are tests out there, I’m unaware of them.

So for me the tests fit the cliche of don’t let perfect be the enemy of good.

Across the board you won’t find manufactures release test results on torture tests on just about anything. Wish more would and if I was manufacture and was confident in my product I would.
 
Joined
Nov 23, 2024
Messages
19
I’ve had half a dozen over the years, from the cheapo freedom line, up through vx6hd. Never had any issues. That said, I’ve never had any bad falls or impacts on them. Only ever taken the vx5 and vx6 passed 450 yards, and they both seem to track well.
 

freddyG

WKR
Joined
Jan 25, 2020
Messages
382
The issue people take is that last part. Junk gear. You don’t like it/had a bad experience. That’s fine. But leupold has more match wins of every type of long range shooting over the years than any other brand. That doesn’t happen with junk. I like leupold. They’ve performed great for me from Alaska to Arizona out to 1200 yards and I prefer them to the nightforce and vortex stuff I’ve owned. The difference though is I don’t call vortex and NF junk gear. I liked the leupold glass better than the NF I had. I had a vortex fail on me. But those companies overall make incredibly good, top notch gear. My limited experience with them is anecdotal.
You proved my point. The reason people have an issue with that statement, is they are emotionally vested in their gear. No amount of proof otherwise, or reasoning with them will change that.

I consider the scope tests here just information. Thats all it is. There is no need to defend certain companies because your feelings were hurt.
 
Joined
Mar 22, 2024
Messages
86
You proved my point. The reason people have an issue with that statement, is they are emotionally vested in their gear. No amount of proof otherwise, or reasoning with them will change that.

I consider the scope tests here just information. Thats all it is. There is no need to defend certain companies because your feelings were hurt.
I’m not hurt at all. You seem hurt that most people trust the choices of pro shooters and elite military units more than they trust the word of a couple random internet guys. The “tests” here are information, but the veracity of that info is unknown. I don’t doubt some have failed. But how would we know if some of them had loose scope rings, inconsistencies in their reloads, can’t call wind from one day to the next etc…?
 

Justin Crossley

Administrator
Staff member
Joined
Feb 25, 2012
Messages
7,631
Location
Buckley, WA
I have a mk4HD I did a quick review on the optics forum here. So far it’s doing fine. I’m going out Sunday to shoot some more and see how it’s doing. I’ll lean it against my truck and knock over into the rocks or something and see what happens.
Just shoot it at the target and record where the first shot hits. Then, next time you take it out, do the same thing. After just a few trips to shoot, you will have a good idea if you can trust the scope.
 

freddyG

WKR
Joined
Jan 25, 2020
Messages
382
I’m not hurt at all. You seem hurt that most people trust the choices of pro shooters and elite military units more than they trust the word of a couple random internet guys. The “tests” here are information, but the veracity of that info is unknown. I don’t doubt some have failed. But how would we know if some of them had loose scope rings, inconsistencies in their reloads, can’t call wind from one day to the next etc…?
Lol. I can tell you don’t get out much. I now trust my gear 100%. No need to check zero unless I switch ammo lots(which rarely happens because I buy in bulk).

I also don’t need to trust pro shooters or elite military units, because I shoot enough to know what works and what doesn’t. That’s how you know for sure, not reading the internet(although that helps in narrowing down what gear to use).

In the end everyone uses what they prefer, but I can guarantee you most aren’t that confident in their gear, or themselves. Otherwise threads like this would be very short.
 

freddyG

WKR
Joined
Jan 25, 2020
Messages
382
Here is an example of no company being immune to problems, and how other disciplines of shooters deal with it. Just like the drop tests here don’t lie, scope checkers don’t lie either.


Like I said, if you want positive results, leave the emotions at home.
 

BBob

WKR
Joined
Jun 29, 2020
Messages
4,626
Location
Southern AZ
scope checkers don’t lie either.
I have two, one for Davidson rails and one for Picatinny rails. I also have a couple of Davidson to Picatinny adapters so I can mix and match on top of the Davidson rail checker. I have a solid Nightforce that has been my base scope to test others by.
 

AZ_Hunter

WKR
Classified Approved
Joined
May 1, 2024
Messages
434
Just shoot it at the target and record where the first shot hits. Then, next time you take it out, do the same thing. After just a few trips to shoot, you will have a good idea if you can trust the scope.
I did that right after the trip. It’s in my review.

Loaded up some more of the same loads today to shoot again tomorrow. The ride to and from my shooting spot is all off-road, not nice forest roads, shit hole torn up desert rocky roads.

Here is the review.
 

Justin Crossley

Administrator
Staff member
Joined
Feb 25, 2012
Messages
7,631
Location
Buckley, WA
I did that right after the trip. It’s in my review.

Loaded up some more of the same loads today to shoot again tomorrow. The ride to and from my shooting spot is all off-road, not nice forest roads, shit hole torn up desert rocky roads.

Here is the review.
It looks to me like that scope is moving from shot to shot or the rifle/ammo combo is not great.
 
Top