DIY Gear Mods: What’s Your Most Rewarding Upgrade and Why?

[michealtrovo]

What’s the most rewarding DIY gear modification you’ve done, and how did it improve your tool’s performance or usability?

 

[KyleR1985]

DIY bino harness I made based off of a post in the DIY section here.

Can’t find thread, but it’s 2” wide elastic webbing, doubled over, with slots sewn in for binos and rangefinder. Then a single 1” elastic band loops over back of 2” webbing behind you, up to your bino lanyard. Regular ole adjustable click buckle under armpit.

Weighs nothing, nothing sticks out past front of your binos which is great for archery.

Only downside is no dust cover, so riding atvs or some other dust creating activity while hunting leaves you cleaning glass.

I’ll see if I can hunt the thread

 

[Decker9]

I actually think the orange strings on my pack zippers are still the best lol. Pretty much every time I reach for a zipper I smile because I can see it.

 

[Davyalabama]

I hope this turns into a good thread!

The one I use the most --- I was able to get very thick 3" webbing, cut it to 3.5 feet, folded over the ends and sewed to make a loop, used an old protector sleeve, put heavy carabiners on each end, attached to my 36qt cooler, attached a key ring multi-tool to it (I will always have a knife and ... close by, the multi-tool comes in handy at the beach)-- so much easier carrying than holding onto two handles, leaves room for carrying other things.

Just to state why I did it -- To get down to our beach is 35' drop, we do have steps --- end of the day - one trip, 9' fabric umbrella, two beach chairs, wife's bag, towels, and an igloo 36qt. cooler still with ice and drinks, one 60 year-old man. Now, I could buy one of those fancy "yeti" types, but have you all lifted those things? They weigh too much before you even load anything in them.

The other diy, I bought some red film at Am$%^&, but this over my headlights for riding trails and roads to and from stands and to get me closer when turkey hunting.

 

[Fireflyfishing]

DIY fire starters. They work every time in every condition. Life is too short to hunt cold.

 

[MuleyFever]

DIY fire starters. They work every time in every condition. Life is too short to hunt cold.

All right. I am proposing a new rule. If you post an awesome DIY you need to tell us how you did it.

 

[nnmarcher]

I added hip vents to my Prana Zions and they remain my favorite pants for any hiking/hunting.

Adding hip vents to pants

I recently added some hip vents to my Prana Zions and they came out pretty well so I thought I'd share since I see many people talk about adding them to Sitka pants. There are a few comments floating around the site about this, but I didn't see a specific thread in the DIY Gear Modifications...

rokslide.com

 

[Fireflyfishing]

All right. I am proposing a new rule. If you post an awesome DIY you need to tell us how you did it.

Fair enough.

Supplies:

• Egg carton
• Drier Lint
• Wax (order perifin wax blocks from amazon)
• Stainless steel bowl and pot to make a double boiler
• Optional: Wax iron for skis or snowboards.

Instructions:

1. Collect egg cartons (paper/carboard construction, not plastic) and lint from your clothes drier.
2. When you have quite a bit of drier lint filling up the egg cartons, you’re ready to make up a batch.
3. Melt the wax in your double boiler or use the wax iron. The wax iron is slower, so I prefer the double boiler.
4. Pour the wax evenly into the carton cups over the drier lint. How full you fill the cups will determine the longevity of burn time of your fire starters. I usually go over half to 3/4 of the cup. This will get you a burn time of 10-15 minutes/fire starter.
5. Cut each cup and store where and however you like.

I keep a full bag of these (18 or so) in my camper. I then have a couple (two is one, one is none) in my outdoor backpacks, snowmobiles, truck, etc. I light them with the trusty Bic lighter with the safety device removed from the flint wheel…because who wants to deal with that with cold hands.

With the burn duration of the fire starters, you can get a fire going when it’s wet and/or snowy outside. However, you still need to know how to build a fire for these to work in those conditions. You can’t just set them under a wet log and expect great results.

Lastly, this is not my idea but I have used it extensively and they work great. I got this off a Cliff Grey YouTube vid.

Another hack I discovered for a fire starter is using a charcoal chimney. You can shove a bunch of kindling sized twigs and branches in the chimney vertically. Throw a piece of newspaper or a brown paper bag under there and light it like it was charcoal. Once the fuel is cooking well, pour it out and you have yourself a fire. I use this one at home in backyard fire pit or at base camp.

Only a fool uses gasoline to light a fire.

 

[4090Sharps]

Probably this bino harness. It's ugly, but terribly useful.

I Hate Stretchy Fabrics - New Bino Pouch

It looks like a face. The sort of "meh" face I have about this project. I wanted to build myself an enclosed binocular harness to hold both my rangefinder and pocket binoculars, and since I love my Marsupial harness, used that for a base to build off of. Materials: 6lb XPE Foam Home-dyed...

rokslide.com

 

[Fireflyfishing]

Buy a book for knot tying and learn a bunch of knots. I have like five different books on my book shelf for tying knots. DIY uses with rope and webbing galore. Knowing how to tie a proper knot in a bad situation may just save your life.