December $487 prefit group buy???

[Lawnboi]

I’d like a 223 ai barrel

I’d also bite for a 223 ai barrel
7 twist
18-22”
Hybrid contour as long as it fits an OG65

Preferred dosnt list the freebore on the ai 223, is also want to confirm that.

 

[mlevimadden]

I stuck with 19” as a happy medium, but looks like I can just do 18” and 20”.

Perfect. Well in that case put me down as a request for

Cartridge 6 prc - NSI reamer
Throat .180 FB
Length 20
Twist 1-7.5

 

[TradLife406]

223 wylde or AI
18"
Hybrid lite
1-7
5/8-24

 

[HuntHarder]

223 wylde or AI
18"
Hybrid lite
1-7
5/8-24

Is there any reason to get AI vs Wylde if only going to be factory ammo? I was thinking Wldye unless I was reloading

 

[Jmedin]

223 wylde or AI
18"
Hybrid lite
1-7
5/8-24

I would get an AI one

 

[TradLife406]

Is there any reason to get AI vs Wylde if only going to be factory ammo? I was thinking Wldye unless I was reloading

I bought 1500 of aac. But I also like to tinker at the reloading bench. I could make some AI loads for hunting with. But still shoot factory.
Wylde would be good too.

 

[Halleywood]

Thinking about jumping in on a 6 creed. I want to shoot the long bullets. Will they fit in a saami spec throat?

 

[Gstew1930]

I would get an AI one

Id take a 223 AI 18" 7 twist in a heart beat

 

[dårlig jeger]

$487 for a Tikka Hybrid Lite contour threaded 5/8 x 24.
SPECIFICATIONS
Cartridge : 300WSM
Throat : SAAMI
Length : 20"
Twist : 8

Looking to experiment with a 300 super wsm.

 

[nm.otter]

I'm about a year out from re-barreling, but curious if (excluding the muzzle swell for threading) the PBB 'Tikka Lite Hybrid' taper matches that of the Tikka Lite/Superlite ? I have a custom stock that's inletted to tight tolerances.

 

[pods8 (Rugged Stitching)]

I'm about a year out from re-barreling, but curious if (excluding the muzzle swell for threading) the PBB 'Tikka Lite Hybrid' taper matches that of the Tikka Lite/Superlite ? I have a custom stock that's inletted to tight tolerances.

It’s a decent copy of the shank taper (much closer than PVA), but it only tapers to 0.75” and then is taperless out to the muzzle. So a stock in letter tightly to a tikka lite will need some material removed in the fore end.

 

[nm.otter]

Hopefully someone will start offering a taper like the 2025 threaded Lites.

 

[43.6N]

Whomever figures out how to standardize a flared muzzle taper to accommodate 5/8 threading will make a mint

 

[pods8 (Rugged Stitching)]

Hopefully someone will start offering a taper like the 2025 threaded Lites.

Just open up your stock a lil. They if you ever chop the barrel shorter you always have the right shoulder.

 

[nm.otter]

The forend on my Pendleton LRH will handle a 16" barrel with a 4" reflex can. That's about as short as I'm ever going to need for 6mm GT.

 

[amassi]

Hopefully someone will start offering a taper like the 2025 threaded Lites.

Pbb Tikka Hybrid Lite


Sent from my iPhone using Tapatalk

 

[Lawnboi]

Is there any reason to get AI vs Wylde if only going to be factory ammo? I was thinking Wldye unless I was reloading

I want ai to experiment if sharp shoulder angles and straight cases make for a more consistent cartridge; like a dasher

Looks like we are close on the 223ai.

 

[Freddy]

I am in for this one. 30 degree. Don’t want to firefor

I am in for this one. 30 degree. Don’t want to fireform.

That would be the 40 degree shoulder, unless specified as the 6 UM30.

I would like the 30 degree shoulder

 

[RockAndSage]

I’d also bite for a 223 ai barrel
7 twist
18-22”
Hybrid contour as long as it fits an OG65

Preferred dosnt list the freebore on the ai 223, is also want to confirm that.

I'd be down for one, possibly two .223 AI barrels.

Also 7 twist, and threaded, but would prefer 16-18".

Wouldn't buy a 22", unlikely to buy a 20", definitely would buy a 16", and would be happy to get an 18" if other people dialed in on that length.

 

[Lawnboi]

I'd be down for one, possibly two .223 AI barrels.

Also 7 twist, and threaded, but would prefer 16-18".

Wouldn't buy a 22", unlikely to buy a 20", definitely would buy a 16", and would be happy to get an 18" if other people dialed in on that length.

I could live with an 18” and would pass on a 16