December $487 prefit group buy???

[Lawnboi]

I’d like a 223 ai barrel

I’d also bite for a 223 ai barrel
7 twist
18-22”
Hybrid contour as long as it fits an OG65

Preferred dosnt list the freebore on the ai 223, is also want to confirm that.

 

[mlevimadden]

I stuck with 19” as a happy medium, but looks like I can just do 18” and 20”.

Perfect. Well in that case put me down as a request for

Cartridge 6 prc - NSI reamer
Throat .180 FB
Length 20
Twist 1-7.5

 

[TradLife406]

223 wylde or AI
18"
Hybrid lite
1-7
5/8-24

 

[HuntHarder]

223 wylde or AI
18"
Hybrid lite
1-7
5/8-24

Is there any reason to get AI vs Wylde if only going to be factory ammo? I was thinking Wldye unless I was reloading

 

[Jmedin]

223 wylde or AI
18"
Hybrid lite
1-7
5/8-24

I would get an AI one

 

[TradLife406]

Is there any reason to get AI vs Wylde if only going to be factory ammo? I was thinking Wldye unless I was reloading

I bought 1500 of aac. But I also like to tinker at the reloading bench. I could make some AI loads for hunting with. But still shoot factory.
Wylde would be good too.

 

[Halleywood]

Thinking about jumping in on a 6 creed. I want to shoot the long bullets. Will they fit in a saami spec throat?

 

[Gstew1930]

I would get an AI one

Id take a 223 AI 18" 7 twist in a heart beat

 

[dårlig jeger]

$487 for a Tikka Hybrid Lite contour threaded 5/8 x 24.
SPECIFICATIONS
Cartridge : 300WSM
Throat : SAAMI
Length : 20"
Twist : 8

Looking to experiment with a 300 super wsm.

 

[nm.otter]

I'm about a year out from re-barreling, but curious if (excluding the muzzle swell for threading) the PBB 'Tikka Lite Hybrid' taper matches that of the Tikka Lite/Superlite ? I have a custom stock that's inletted to tight tolerances.

 

[pods8 (Rugged Stitching)]

I'm about a year out from re-barreling, but curious if (excluding the muzzle swell for threading) the PBB 'Tikka Lite Hybrid' taper matches that of the Tikka Lite/Superlite ? I have a custom stock that's inletted to tight tolerances.

It’s a decent copy of the shank taper (much closer than PVA), but it only tapers to 0.75” and then is taperless out to the muzzle. So a stock in letter tightly to a tikka lite will need some material removed in the fore end.

 

[nm.otter]

Hopefully someone will start offering a taper like the 2025 threaded Lites.

 

[43.6N]

Whomever figures out how to standardize a flared muzzle taper to accommodate 5/8 threading will make a mint

 

[pods8 (Rugged Stitching)]

Hopefully someone will start offering a taper like the 2025 threaded Lites.

Just open up your stock a lil. They if you ever chop the barrel shorter you always have the right shoulder.

 

[nm.otter]

The forend on my Pendleton LRH will handle a 16" barrel with a 4" reflex can. That's about as short as I'm ever going to need for 6mm GT.

 

[amassi]

Hopefully someone will start offering a taper like the 2025 threaded Lites.

Pbb Tikka Hybrid Lite


Sent from my iPhone using Tapatalk

 

[Lawnboi]

Is there any reason to get AI vs Wylde if only going to be factory ammo? I was thinking Wldye unless I was reloading

I want ai to experiment if sharp shoulder angles and straight cases make for a more consistent cartridge; like a dasher

Looks like we are close on the 223ai.