7mm prc, how short is too short?

prcwv

Lil-Rokslider
Joined
Mar 25, 2023
Messages
175
Try out the 170 terminal ascents. You will prolly be 2840+ still - I'm right at 3k with a 22"

Sent from my SM-S916U using Tapatalk
I want to try some I bought a box of 155s to try just to see. Looks like Federal has been on par. I hope they put those bullets out again
 
Joined
Jan 29, 2015
Messages
1,981
Location
Kalispell
I want to try some I bought a box of 155s to try just to see. Looks like Federal has been on par. I hope they put those bullets out again
I haven't shot the 155s, but the 170s have shot pretty well (sub MOA) in my guns.

Sent from my SM-S916U using Tapatalk
 

prcwv

Lil-Rokslider
Joined
Mar 25, 2023
Messages
175
Seems like a pretty light bullet for the 7PRC.
They didn't have the 170s or 175s I just wanted to see how bad hornadys were. But if you look up the bc is pretty close to a 162 they aren't short an fat at all
 

prcwv

Lil-Rokslider
Joined
Mar 25, 2023
Messages
175
Loaded up 5 of each Rl26 an 23 trying different lengths.RL23 obviously had some accuracy issues compared to everything else. N560 an 565 looked really good. I only had two empty cases left why there was only 2 with 565 but looked promising. I'll atleast have data with those two since Alliant Powder is so hard to find an priced ridiculous.
Screenshot_20240308_091917_Digital Link.jpg
 

Attachments

  • 20240308_093143.jpg
    20240308_093143.jpg
    267 KB · Views: 27
  • Screenshot_20240308_092854_Digital Link.jpg
    Screenshot_20240308_092854_Digital Link.jpg
    69.4 KB · Views: 27
  • 20240308_090432.jpg
    20240308_090432.jpg
    227.5 KB · Views: 27
  • Screenshot_20240308_085832_Digital Link.jpg
    Screenshot_20240308_085832_Digital Link.jpg
    66.3 KB · Views: 27
  • Screenshot_20240308_090118_Digital Link.jpg
    Screenshot_20240308_090118_Digital Link.jpg
    69.6 KB · Views: 26
  • 20240308_091332.jpg
    20240308_091332.jpg
    284.3 KB · Views: 28
  • Screenshot_20240308_091218_Digital Link.jpg
    Screenshot_20240308_091218_Digital Link.jpg
    71.2 KB · Views: 27
  • 20240308_092146.jpg
    20240308_092146.jpg
    264.9 KB · Views: 27

prcwv

Lil-Rokslider
Joined
Mar 25, 2023
Messages
175
@prcwv 2825fps with the n565 isn't too shabby especially with ES of 4fps. Critters will die
For sure, I loaded up 5 each of RL 26 an 23 since I have a few lbs on hand seated bullet further out an am using Larg rifle match instead of magnums see what kind of group I get today. Goal was atleast 2800 anything over is a bonus. Only got be used to 5 or 600 yds at most an idk that ever happen lol. If I don't like what they do I may do two 5 shot groups with 560 an 565 too. I have to order that if it works only thing local is priced $20 higher a lb than online
 

199p

Lil-Rokslider
Joined
Mar 4, 2015
Messages
155
Location
New Zealand
Got this today from my gun builder
20" 7prc he is going to shoot some factory Hornady ammo over the weekend and hopefully, i get it next week.

Pierce shadow action
bartlin 2B barrel
stockies stock
vx5 scope
DPT can
 

Attachments

  • 7prc b.jpg
    7prc b.jpg
    113.7 KB · Views: 86
  • 7prc a.jpg
    7prc a.jpg
    99 KB · Views: 87

199p

Lil-Rokslider
Joined
Mar 4, 2015
Messages
155
Location
New Zealand
frew groups from the rifle builder before he sent it out
said my barrel is on the slower side but will do exactly what i need it to even at 180's at 2700
 

Attachments

  • Screenshot_20240327_090252_Messages.jpg
    Screenshot_20240327_090252_Messages.jpg
    34.6 KB · Views: 34
  • Screenshot_20240327_090256_Messages.jpg
    Screenshot_20240327_090256_Messages.jpg
    36.5 KB · Views: 34
  • Screenshot_20240327_090303_Messages.jpg
    Screenshot_20240327_090303_Messages.jpg
    40.3 KB · Views: 33
  • Screenshot_20240327_090312_Messages.jpg
    Screenshot_20240327_090312_Messages.jpg
    24.2 KB · Views: 33

prcwv

Lil-Rokslider
Joined
Mar 25, 2023
Messages
175
frew groups from the rifle builder before he sent it out
said my barrel is on the slower side but will do exactly what i need it to even at 180's at 2700
Just depends on the powder from what I've noticed. I loaded some up with 560 in once fired brass actually .1 grain less then what I'd been running an it was smoking. Average 3013 with 18 inch barrel but it was hot. I'm gonna back er down see where to where speed settle but think I found my grouping at .010 off with 162 ELDX.
 

199p

Lil-Rokslider
Joined
Mar 4, 2015
Messages
155
Location
New Zealand
Nice man, I am just going to run factory ammo in this one, got both 175s and 180 Hornady, Federal is ages away from hitting our shores.

I know the 180s kill very well and buck the wind like a mf . That's what I need in the NZ hills the most as our wind is on crack.
 

prcwv

Lil-Rokslider
Joined
Mar 25, 2023
Messages
175
Nice man, I am just going to run factory ammo in this one, got both 175s and 180 Hornady, Federal is ages away from hitting our shores.

I know the 180s kill very well and buck the wind like a mf . That's what I need in the NZ hills the most as our wind is on crack.
I hear that. I just got some federal 175s to chrono. I only got 2810 with 180 eldms an 22 inch barrel 2690ish when I went to 18. The 155 feds did 3000 with a 18 inch
 
Top