.25 Cal (Quarter Bore) / Big Game Success - 25 Creed, 25-284, 25-06, 25 PRC, 25 SAUM

[Kimber7man]

Finally grabbed some Alpha brass the other day and wanting to get bullets to double for NRL and hunting. I’ve seen some people tout the 133 and others the 135.

Right now I’m shootng factory ELDM’s, but I know from measuring them for my 6.5CM they can be quite varying. My buddy reloads for me and he makes me separate them by length so it’s not fun lol. Sees like the 135s have no issues getting proper expansion hunting, would that be the consensus choice?

COAL of those loaded rounds can be all over the place for sure. He should be measuring BTO to check for variance in length which matters more than COAL.

 

[eoperator]

128 eldx

565 showed pressure early for me
570 is at 2990fps and r26 is at 3005fps (20" 25/6.5prc .180fb) 2 grains below pressure.

 

[eoperator]

128eldx r26 -2g from pressure seated just above the shoulder/neck junction, same zero as previous load, 2997fps. I had a small seizure while jerking the trigger on the high left one, wind was blowing up my back.

Looks like they will shoot good enough for the animals i chase.

 

[sierracharlie338]

128eldx r26 -2g from pressure seated just above the shoulder/neck junction, same zero as previous load, 2997fps. I had a small seizure while jerking the trigger on the high left one, wind was blowing up my back.

Looks like they will shoot good enough for the animals i chase. View attachment 963540

That will definitely work. Solid speed from a 20 inch tube also. Should be a hammer.

 

[eoperator]

That will definitely work. Solid speed from a 20 inch tube also. Should be a hammer.

I was a bit surprised by the velocity, was not expecting that.

 

[jjohnsonElknewbie]

I was a bit surprised by the velocity, was not expecting that.

Your numbers may have me convinced to try N565 or N570 in my 25-284 with 22" barrel. I'm getting 2820 with the 134 with 54.5 of H1000. I have N565 on hand for my 6.5 WSM build, so it wouldn't take much to try a pressure ladder. Ive not seen RL26 available anywhere, ever.

 

[Kimber7man]

Your numbers may have me convinced to try N565 or N570 in my 25-284 with 22" barrel. I'm getting 2820 with the 134 with 54.5 of H1000. I have N565 on hand for my 6.5 WSM build, so it wouldn't take much to try a pressure ladder. Ive not seen RL26 available anywhere, ever.

I’d try 560 as well, that powder works great in my 6.5PRC with 140’s so might be similar in your 25-284 with 134’s.

 

[Twistedtrucker1]

We’re can i rent a 25Saum Remer ?

 

[eoperator]

Your numbers may have me convinced to try N565 or N570 in my 25-284 with 22" barrel. I'm getting 2820 with the 134 with 54.5 of H1000. I have N565 on hand for my 6.5 WSM build, so it wouldn't take much to try a pressure ladder. Ive not seen RL26 available anywhere, ever.

From what I've seen in the 6.5prc case n565 will get maybe 25-50fps over h1000. N570 will likely get 100+fps over h1000 but a long cartridge oal and vibration will be needed. If you are looking for high velocity n560 will be fast also.

 

[jjohnsonElknewbie]

We’re can i rent a 25Saum Remer ?

Did you look at 4D and see if they have one?

 

[Twistedtrucker1]

Did you look at 4D and see if they have one?

Found this one

 

[jjohnsonElknewbie]

From what I've seen in the 6.5prc case n565 will get maybe 25-50fps over h1000. N570 will likely get 100+fps over h1000 but a long cartridge oal and vibration will be needed. If you are looking for high velocity n560 will be fast also.

COAL for my 134 load is 3.14 and that's what it was chambered for to be off the lands. 100fps would be more of an ego thing vs. a substantial ballistic advantage. However, I may play around with it and see what can be accomplished. Thanks!

 

[Shooter264]

Found this one

I’ve got one and would be happy to spin up a barrel for you.