.223 for bear, mountain goat, deer, elk, and moose.

grfox92

WKR
Joined
Mar 14, 2017
Messages
2,757
Location
NW WY
I figure this is the best place to ask this question. I'm looking to start shooting the piss out of my 1:9 AR to practice field positions in order to save money, powder ect. Is there any bulk bullets I should be looking at or am I better off sticking with ELDs?

Not sure if there is anything out there in bulk, weight doesn't matter all that much as it's not for hunting at this point.

Edit: maybe another question I should ask is, how much is it costing you to reload .223? Is it even worth it for ringing steel at 400 yards? I bought a box of Fiochi 55gr Vmax for 50 rounds for $42. They have 50rnds of FMJ for $37 also.

Thanks fellas.

Sent from my SM-G990U2 using Tapatalk
 
Last edited:
Joined
Nov 12, 2020
Messages
1,342
I figure this is the best place to ask this question. I'm looking to start shooting the piss out of my 1:9 AR to practice field positions in order to save money, powder ect. Is there any bulk bullets I should be looking at or am I better off sticking with ELDs?

Not sure if there is anything out there in bulk, weight doesn't matter all that much as it's not for hunting at this point.

Edit: maybe another question I should ask is, how much is it costing you to reload .223? Is it even worth it for ringing steel at 400 yards? I bought a box of Fiochi 55gr Vmax for 50 rounds for $42. They have 50rnds of FMJ for $37 also.

Thanks fellas.

Sent from my SM-G990U2 using Tapatalk
I’ll be loading 73gr eldm at about $.51 each.
 

blkqi

WKR
Joined
Aug 21, 2017
Messages
456
I like to load pulls or blems for plinking, or else just your standard 55 HPBT.
 

ztc92

WKR
Joined
May 8, 2022
Messages
355
I figure this is the best place to ask this question. I'm looking to start shooting the piss out of my 1:9 AR to practice field positions in order to save money, powder ect. Is there any bulk bullets I should be looking at or am I better off sticking with ELDs?

Not sure if there is anything out there in bulk, weight doesn't matter all that much as it's not for hunting at this point.

Edit: maybe another question I should ask is, how much is it costing you to reload .223? Is it even worth it for ringing steel at 400 yards? I bought a box of Fiochi 55gr Vmax for 50 rounds for $42. They have 50rnds of FMJ for $37 also.

Thanks fellas.

Sent from my SM-G990U2 using Tapatalk

You sound like you’re in the same place I was a year ago when I looked to ramp up practice with my 223. Here’s a write up I did with my thoughts on buying ammo vs reloading at that time. Ammo as well as reloading supplies are easier to find and less expensive now but I suspect the cost/benefit ratio is similar.

For what it’s worth, if I could do it all over again I’d probably just buy a case of Hornady Frontier 75g BTHP and only reload for bullets that are hard to find in factory ammo, such as the 77TMK. It was a lot of time and effort for minimal savings when I look back on it.

 

robtattoo

WKR
Joined
Mar 22, 2014
Messages
3,519
Location
Tullahoma, TN
Keep your eye on Midway for blems. I usually end up grabbing anything I can with a soft point, 62gr or better. The last bunch I bought were Sierra Gameking 65gr at $10.99/100.
Last week I snagged 1000 of the 77gr blems (Hornady OTM) for $14.99/100
Usually won't reload bulk unless I can do it for under 20c a shot. My usual cost is around 12-15 cents per.
 

grfox92

WKR
Joined
Mar 14, 2017
Messages
2,757
Location
NW WY
Maybe, does your gun shoot factory offerings fine? Do you like to load? Tinker?
I do reload and enjoy it. I've quite litterally never shot my AR once in the 3 years I've owned it and have shot the one I've owned for 10 years twice in that time lol.

I'm going burn 30 rounds of bulk fmj I have getting on paper and close to zeroed and see how those group, then I'll truly zero with the 55gr Vmax I bought so I can take my son Coyote hunting.

Sent from my SM-G990U2 using Tapatalk
 
Joined
Nov 12, 2020
Messages
1,342
I do reload and enjoy it. I've quite litterally never shot my AR once in the 3 years I've owned it and have shot the one I've owned for 10 years twice in that time lol.

I'm going burn 30 rounds of bulk fmj I have getting on paper and close to zeroed and see how those group, then I'll truly zero with the 55gr Vmax I bought so I can take my son Coyote hunting.

Sent from my SM-G990U2 using Tapatalk
For low volume, I wouldn’t mess with it. If you want high volume and quality ammo I’d get to pulling the handle.
 
OP
P

PNWGATOR

WKR
Shoot2HuntU
Joined
Oct 14, 2014
Messages
2,744
Location
USA
I was in the store today and looked at .223 ammunition. They are small.
Bullets matter.

Correct bullets (wound channel, depth of penetration, BC) delivered with high accuracy and high precision out of a robust delivery system with impact velocity adequate to deliver terminal performance with the highest hit rate and lowest recoil…

This entire thread is based on objectivity and efficiency and end results that matter.

Please, read the thread. Trust the process. Verify the process for yourself. Post your findings with pictures and necropsy results.

We’ll all learn!
 

Tahr

Lil-Rokslider
Joined
Dec 13, 2018
Messages
127
Wait you’re taking 70 deer annually on the north island? I thought the majority of the hunting was South Island. That’s awesome!
Lots of hunting on the NI. I don't want to distract from the purpose of this thread so have PM'd you.
 
Last edited:

Tahr

Lil-Rokslider
Joined
Dec 13, 2018
Messages
127
Please keep posting your .223 experiences!

We all have a lot to gain from first hand terminal performance reports including pics!
It's pretty good performance for a 52 grain bullet to go right through this deer and make a good exit wound (pic shows the width it penetrated). As said they are Berger jackets and the guy who makes them here seems to have got the core mixture pretty right. Im not advocating little bullets but it does show what can be achieved with the right mix of ingredients of speed plus bullet design. IMG_9350.jpg
 
Top