.223 for bear, mountain goat, deer, elk, and moose.

Antares

WKR
Joined
Jan 13, 2021
Messages
2,084
Location
Alaska
You can safely assume that he has been informed by this very thread. Lots of his stuff comes off the internet. It's often easy to track his sources. Doesn't make him wrong though, or always right.

When's he going to get over the whole "HOLD THE FOREND!" thing?
 

Antares

WKR
Joined
Jan 13, 2021
Messages
2,084
Location
Alaska
I hold the foreend and shoot better with a firm grip on it. To each his own, though

I don't care what people do with their support hand (e.g., hold the forend, put a hand over the scope tube, use a rear bag, etc.).

I take issue with Nathan's assertation that doing anything other than holding the forend is somehow lazy and undisciplined.
 

hereinaz

WKR
Rokslide Sponsor
Joined
Dec 21, 2016
Messages
3,333
Location
Arizona
As this is a .223 thread, I would point out that the need to hold the forend or the scope is largely eliminated. Compared to the typical .308, 30-06, 300 win mag and everything in between, the need to control the forend of a .223 because of recoil is significantly reduced if not eliminated.

Now, holding the scope or forend to prevent wobble as a part of building a stable position is another thing.

I have learned that a properly sized and configured rifle system and proper body position reduces the benefit from holding the forend on precision.
 

DJL2

Lil-Rokslider
Joined
May 22, 2020
Messages
261
You can safely assume that he has been informed by this very thread. Lots of his stuff comes off the internet. It's often easy to track his sources. Doesn't make him wrong though, or always right.
I would hope so! That is what this thread is about, after all. To some extent, I think that reflects what Form posted concerning projectile choices and how they have been informed by development and availability. Heavy for caliber, consistently fragmentary projectiles are arguably more available now in quality/quantity than ever. Even if folks aren't sold on .224" as the answer, getting them around to the idea that "bullets matter more than headstamps" is important - both for them as a shooter, and for the ethical harvest of the animals we hunt.

I'm also digging the 22 ARC concept... even if it's just a 22 PPC in different clothing. You can put that in the rack next to your .223 Rem for a "big" gun option ;-). I want the 22 ARC to be successful because I think it's an amazing "jack of all trades" cartridge that doesn't require someone to run something BR/PPC boutique. My hope is that it puts heavy .224" TMK / ELD-M options in more shooter's hands.
 

Elite7

FNG
Joined
Sep 9, 2016
Messages
56
I’ll be in the market for a 223 in the next couple months for my kids to starts using next fall. If anyone has recommendations, I am looking for a youth/ compact rifle with a threaded barrel for a suppressor. Seems hard to find the shirt length if pull and threaded barrel together on a 223.
 

BLJ

WKR
Joined
Jan 19, 2020
Messages
2,430
Location
WV
@Elite7

I have a Ruger American Ranch that I “think” I can cut the LOP down to compact length.
I’m guessing that the upper hole on the bottom is for a smaller (compact) recoil pad.
Hoping to try this in the next couple months. IMG_2589.jpeg
 

Marshfly

WKR
Joined
Sep 18, 2022
Messages
1,263
Location
Missoula, Montana
I’ll be in the market for a 223 in the next couple months for my kids to starts using next fall. If anyone has recommendations, I am looking for a youth/ compact rifle with a threaded barrel for a suppressor. Seems hard to find the shirt length if pull and threaded barrel together on a 223.

It should cost ~$150 to cut and thread a barrel. Buy the correct rifle and then just have it threaded.


Sent from my iPhone using Tapatalk
 

amassi

WKR
Joined
May 26, 2018
Messages
3,932
I’ll be in the market for a 223 in the next couple months for my kids to starts using next fall. If anyone has recommendations, I am looking for a youth/ compact rifle with a threaded barrel for a suppressor. Seems hard to find the shirt length if pull and threaded barrel together on a 223.

Compact tikka for the win


Sent from my iPhone using Tapatalk
 

Marshfly

WKR
Joined
Sep 18, 2022
Messages
1,263
Location
Missoula, Montana
I mentioned the correct rifle right above your post.


I know. I know.

Having owned both Ruger Americans and Tikkas…no.

The American I owned shot well but it just felt cheap. I would 100% buy that before a CVA or anything else under $700 though. If the one I had wasn’t right handed I would still own it. Damn a son growing up and ending up left eye dominant.


Sent from my iPhone using Tapatalk
 
OP
P

PNWGATOR

WKR
Shoot2HuntU
Joined
Oct 14, 2014
Messages
2,744
Location
USA
I’ll be in the market for a 223 in the next couple months for my kids to starts using next fall. If anyone has recommendations, I am looking for a youth/ compact rifle with a threaded barrel for a suppressor. Seems hard to find the shirt length if pull and threaded barrel together on a 223.
Tikka T3x Compact 223 and have it cut and threaded for a can. SWFA 6x milquad mil/mil mounted with UM rings. Done.
 

nobody

WKR
Joined
Sep 15, 2020
Messages
2,111
SWFA Milquad is the stuff of fairytales except for used these days. We need a new recommendation IMHO.


Sent from my iPhone using Tapatalk
Trijicon Credo. It’s more $$, but still can be had under $1k. If dialing isn’t important the Huron and accupoint models can be had for less, but it won’t be FFP
 
OP
P

PNWGATOR

WKR
Shoot2HuntU
Joined
Oct 14, 2014
Messages
2,744
Location
USA
What we need is @Unknown Munitions @Formidilosus @Ryan Avery to design, engineer and produce THE RokSlide special in house.

Rifle. Scope. Rings.

Let customers decide which bullet they want to shoot based on desired outcomes and have a plug and play easy button choice delivery system.

Seems simple enough to me.

#McRokslideSpecial ie Billiion$Brand
 
Top