.223 for bear, mountain goat, deer, elk, and moose.

[Formidilosus]

Do you have opinions on the SilencerCo Harvester? How does it compare to the JK?

It’s a fine can.

 

[HandgunHTR]

For you tikka 223 guys... what is the best/favorite budget suppressor to dedicate to your 223/tikka/6xswfa combo? Anything Under 10oz, less than 8 inches long, and under $600?

This is one that comes very close to what you are looking for. https://www.silencershop.com/catalo...ategory/1/id/6172/s/silencerco-harvester-evo/

As Form stated, it is a fine can. It is good for what it is for, which is bench work or hunting. I have one of the original Harvesters and it works very well on my hunting rifles.

 

[Stu]

Yep, mistake on your part
Swap the rings around so the one without a hole goes at the front allowing it to move forward to the front of the dovetail
The ring with the hole goes over the rear pin

I'm an idiot. Thanks!

 

[ResearchinStuff]

Stu I thought you were trolling us with those photos

 

[Darryle]

I'm an idiot. Thanks!

I didn't call you an idiot, but I did make the suggestion 30ish posts ago

 

[MattB]

Stu I thought you were trolling us with those photos

I was so confused when I saw the picture with the based pushed forward up against the pin.

For those who are confused, see 1:01.

 

[SteveAndTheCrigBoys]

It’s a fine can.

Was considering a Harvester for it's price...ended up going with a Nomad Ti. Have you shot that one?

I'll be using it on my .223 for yotes and cats, I imagine the suppression amount is less with a smaller diameter projectile through a .30 cal can.

 

[Formidilosus]

Was considering a Harvester for it's price...ended up going with a Nomad Ti. Have you shot that one?

I'll be using it on my .223 for yotes and cats, I imagine the suppression amount is less with a smaller diameter projectile through a .30 cal can.

I have, but other than it being fine I don’t remember anything noteworthy.

And no, the more is no noticeable difference using a .224 in a 30ca can.

 

[SteveAndTheCrigBoys]

I have, but other than it being fine I don’t remember anything noteworthy.

And no, the more is no noticeable difference using a .224 in a 30ca can.

Dang, might coulda saved some cash and gone with a cheaper one haha

 

[Lawnboi]

Feels good to only pull the press once for 223 now as well.

 

[280Ackley]

Any recommendations on an AR 223 barrel manufacturer? Needing to upgrade mine to a 1:8 twist and I’d like a 18”.

 

[clperry]

Any recommendations on an AR 223 barrel manufacturer? Needing to upgrade mine to a 1:8 twist and I’d like a 18”.

LaRue Stealth


Sent from my iPhone using Tapatalk

 

[ztc92]

This is one that comes very close to what you are looking for. https://www.silencershop.com/catalo...ategory/1/id/6172/s/silencerco-harvester-evo/

As Form stated, it is a fine can. It is good for what it is for, which is bench work or hunting. I have one of the original Harvesters and it works very well on my hunting rifles.

For you tikka 223 guys... what is the best/favorite budget suppressor to dedicate to your 223/tikka/6xswfa combo? Anything Under 10oz, less than 8 inches long, and under $600?

Just wanted to add another vote for the harvester evo. It’s my first can and I chose it for the affordable cost, light weight and the fact it was available through a local vendor I trusted.

I’ve fired about 750 rounds of .223 through mine using my own rokslide special cut down to 20” and overall I’ve been very pleased with it. I feel like it is hearing safe for at least 5 consecutive shots (the most I’ve tested) and likely much more than that.

I also appreciate that you get both 1/2 x 28 and 5/8 x 24 bravo direct thread mounts with the can. Additionally, you can purchase a 9/16 x 32 bravo direct thread mount from SilencerCo, which seems to be the most common thread size used to thread the Tikka lite and superlite barrels.

 

[Darryle]

Any recommendations on an AR 223 barrel manufacturer? Needing to upgrade mine to a 1:8 twist and I’d like a 18”.

If you can find a 3r ARP, I highly recommend. I bought a second when Harrison decided to hang it up. You might be able to snag one from him provided he hasn't sold the remaining stock

 

[Castle Rock]

I Google it... and came up with a wyoming arms 4 squared and 5 squared ti suppressor, 4 and 5 oz respectively. Fits the bill price wise... just don't know how they would do on actual suppression. I read they claim to reduce 20db on a 300win. Anyone tried one on a 223? Anything else comparable?

Wyoming Arms, John Squirms, definitely no

 

[Castle Rock]

Stu I thought you were trolling us with those photos

Me too

 

[Darryle]

Wyoming Arms, John Squirms, definitely no

Yeah ol Puddin is a great source of knowledge, it's just his brain has put the decimal in the wrong place in the library's dewey decimal system so you never know what you are getting

 

[cod0396]

Any recommendations on an AR 223 barrel manufacturer? Needing to upgrade mine to a 1:8 twist and I’d like a 18”.

Criterion Core or Hybrid. Former if you prefer a nicer (better handling) barrel profile, latter if you want the best precision. They are both extremely well gassed too.

 

[Huntsalot]

62 grain Fusion back in stock.

Federal Fusion 223 Remington Ammo 62 Grain Bonded Round Nose Box of 20

Federal Fusion Ammunition is loaded with a specialized bullet, perfect for deer sized game, that features an electrochemically bonded lead core to...

www.midwayusa.com

 

[Deywalker]

62 grain Fusion back in stock.

Federal Fusion 223 Remington Ammo 62 Grain Bonded Round Nose Box of 20

Federal Fusion Ammunition is loaded with a specialized bullet, perfect for deer sized game, that features an electrochemically bonded lead core to...

www.midwayusa.com

Checkout Targetsports USA. They have the fusion MSR for less, and they also have the 73gr ELD-M