***2018-2019 Hells Canyon Armory Group buy/build***

[HellsCanyon]

Come on mike you have to finish up my rifle! I can’t wait to see it!

All in good time bud!

Mike

 

[brushape]

Can you post a picture of how the shoulder will look on a tikka action?


Sent from my iPhone using Tapatalk

 

[HellsCanyon]

Can you post a picture of how the shoulder will look on a tikka action?


Sent from my iPhone using Tapatalk

I’ll see if I can’t find a picture. If required I can run a 1.200” tennon OD but have to know from the start so I can turn the tennon down before wrapping.

Also, I get a LOT of questions regarding threading the muzzle of my barrels. There is at minimum .635” OD of steel underneath (.700” for 338 cal). You can machine the carbon with HSS or Carbide tooling just like you do stainless and cut whatever threads needed. Because of my fiber orientation you can time a break on it. It’s very stable and machines great.

For those of you using suppressors, I’m having a run gunsmith thread adapters made, they’re 1/2:32 ID thread and 5/8:24 OD thread with enough Steel shoulder OD to be blended to whatever length and OD your barrel finishes at. The 32TPI has a much higher holding capacity so a small drop of loktight and it’ll stay secure when tightening/loosening a 5/8:24 pitch brake!

I’ll be adding these to the website next week and will offer them as an installed option as well as raw part for your smith to install.

I just touched down at SHOT show so I’m out of the shop this week!

Mike


Sent from my iPhone using Tapatalk

 

[ofl0926]

I’ll see if I can’t find a picture. If required I can run a 1.200” tennon OD but have to know from the start so I can turn the tennon down before wrapping.

Also, I get a LOT of questions regarding threading the muzzle of my barrels. There is at minimum .635” OD of steel underneath (.700” for 338 cal). You can machine the carbon with HSS or Carbide tooling just like you do stainless and cut whatever threads needed. Because of my fiber orientation you can time a break on it. It’s very stable and machines great.

For those of you using suppressors, I’m having a run gunsmith thread adapters made, they’re 1/2:32 ID thread and 5/8:24 OD thread with enough Steel shoulder OD to be blended to whatever length and OD your barrel finishes at. The 32TPI has a much higher holding capacity so a small drop of loktight and it’ll stay secure when tightening/loosening a 5/8:24 pitch brake!

I’ll be adding these to the website next week and will offer them as an installed option as well as raw part for your smith to install.

I just touched down at SHOT show so I’m out of the shop this week!

Mike


Sent from my iPhone using Tapatalk

Have fun brother!!!


Sent from my iPhone using Tapatalk

 

[brushape]

Too late to get In on the group buy?


Sent from my iPhone using Tapatalk

 

[Ronin75]

I was wondering about that also

 

[Totoro]

Tag

 

[rayporter]

aint nothing like waiting on your NEW rifle to be finished.

 

[ofl0926]

aint nothing like waiting on your NEW rifle to be finished.

I feel you.
I’m on the same boat


Sent from my iPhone using Tapatalk

 

[HellsCanyon]

Group buy is over but let me see if I can’t come up with a permanent Rokslide code or something. Savings won’t be as much as the original group but but I can do something for the late comers!

Mike


Sent from my iPhone using Tapatalk

 

[Quicksilver]

Just received mine yesterday, thanks Mike!! 27” 30cal heavy hunter going to be used for a 300 Norma improved. Going to be my fix for my 300wm and also wanting a 338 Lapua, it will fill the gap between the two and have one rifle to rule them all (famous last words) Can’t wait to get started on it!

 

[HellsCanyon]

Alright folks, permanent 10% code for Rokslide members is up for carbon barrels. Just use rokslide10 at checkout! Thank you very much.

Mike

 

[Quicksilver]

Great...now I want another one...thanks mike!

 

[Northernpiker]

Very generous, thanks Mike.

 

[357magag]

With quality factory and blueprinted/trued Rem SA what accuracy can one expect from your barrels with a high BC round like 6.5CM or 300 PRC?

 

[HellsCanyon]

With quality factory and blueprinted/trued Rem SA what accuracy can one expect from your barrels with a high BC round like 6.5CM or 300 PRC?

I put the same 1/2MOA guarantee on my Rem 700 builds that I do on my custom action builds


Sent from my iPhone using Tapatalk

 

[Lawnboi]

Sent you an email with some questions. Looking out at the end of the year to get some tikka work done

 

[lintond]

Any plans for another group buy?


Sent from my iPhone using Tapatalk

 

[MuleyFever]

Any plans for another group buy?


Sent from my iPhone using Tapatalk

If @HellsCanyon does another I think may be in for the Ultralight Summit.

 

[Cody_W]

Hey Mike, I tried using the code today and it wouldn’t work. Is it still supposed to be active? @HellsCanyon