XLR 4.0 builds

ssgjpd

Lil-Rokslider
Classified Approved
Joined
Mar 30, 2022
Location
texas
I have one of these on order that I plan to build a 6.5 PRC on. For those that have them, do you mind sharing your pictures, build details and weight?

This is what mine will have, so I will have to weigh once it is assembled.

Defiance AntiX XM+
Proof Sendero Light 20"
TriggerTech Special
XLR 4.0 MG with 12" folding
Nightforce NXS 2.5x10x42 MOAR
Nightforce Ultralight 1.0' rings
TBAC Ultra 7 Gen 2 Direct Thread
UM Magazine
 
I am having one built that should be completed in about a month.

- 7mm PRC
- Mack Bros EVO II TI
- Trigger Tech Special
- Bartlein Carbon Fiber #13 finished at 20"
- XLR Atom with Carbon buttstock and folder
- Hawkins Precision Ultra-Light Tactical scope rings
- Trijicon Tenmile HX 3-18
- Accurate 3-rd & 5-rd mags
- SilencerCo Scythe (in jail yet.. but could also utilize the dead air nomad LT)
 
My barreled action is on its' way home, I should have pictures in a week or so.
 
20240119_143402.jpg

XLR 4.0 Magnesium
Tikka action
22" Hells Canyon Armory chambered in 7 max
Maven RS1.2 2.5-15
Warne mountain tactical rings
Anarchy Outdoors 20 moa base

The gun as pictured weighs 9.5 lbs. Should finish at 11 lbs with the can and bipod.
 
Still waiting on a barrel and brake, currently sits at 99oz.

Tikka action
modified 5rd mag to 3rd
trijicon credo 2.5-15x44
Mtn Gear titanium bolt handle
Carbon 6 18” 6.5 saum prefit
Will be running some kind of titanium brake
Plan on adding the UM action lightening to lose 4oz.

Should be right around 8lbs 3oz when finishes. IMG_7001.jpeg
 
@Quicksilver , couple questions if you don't mind. Is your chassis the tikka long or short action? How or who modified the mag to a 3 round? Thanks.
 
Still waiting on a barrel and brake, currently sits at 99oz.

Tikka action
modified 5rd mag to 3rd
trijicon credo 2.5-15x44
Mtn Gear titanium bolt handle
Carbon 6 18” 6.5 saum prefit
Will be running some kind of titanium brake
Plan on adding the UM action lightening to lose 4oz.

Should be right around 8lbs 3oz when finishes. View attachment 661709
Do you have this done yet? Curious on final weight.
 
Do you have this done yet? Curious on final weight.
No yet, waiting to get my action back from UM and my barrel to show up from C6. My guess is sometime in April it will be complete.

Another member had the same barrel ordered for his tikka in 6.5prc and it was 2lbs 3oz if I remember correctly. Going off that weight it will come in right around predicted. Low 8lbs for sure though.
 
Xlr (via unknown and Hawkins) have a few 3-4 round lighter weight mag options these days (link below). Weight is ~2.7oz.

Curious as to the why on modifying a AICS 5 round vs those.

Thx.

 
Xlr (via unknown and Hawkins) have a few 3-4 round lighter weight mag options these days (link below). Weight is ~2.7oz.

Curious as to the why on modifying a AICS 5 round vs those.

Thx.

They don’t fit the tikka long action 3.560
 
No yet, waiting to get my action back from UM and my barrel to show up from C6. My guess is sometime in April it will be complete.

Another member had the same barrel ordered for his tikka in 6.5prc and it was 2lbs 3oz if I remember correctly. Going off that weight it will come in right around predicted. Low 8lbs for sure though.
Nice! I’m waiting on my bolt to be coated, then will put mine together, but I’m using a hart #5. Im thinking I will be at 9 lbs.
 
Anyone come up with a way to guard the chassis from cold? I hate touching the heat sink in the winter.
 
View attachment 661687

XLR 4.0 Magnesium
Tikka action
22" Hells Canyon Armory chambered in 7 max
Maven RS1.2 2.5-15
Warne mountain tactical rings
Anarchy Outdoors 20 moa base

The gun as pictured weighs 9.5 lbs. Should finish at 11 lbs with the can and bipod.
Love finally seeing a picture of the grey. I’ve got one coming for my 300 prc. Is that the RS 1.2? I’m also looking at swapping my current scope for that one.
 
Back
Top