XLR 4.0 builds

[Ohiohuntr]

Mine is defiance la, 22” proof 7 prc, nightforce nx8 2.5-20 with ultralight NF rings, chub break and tigger tech diamond just at9lbs give or take a few oz i can get more accurate tomorrow if ur interested

 

[JMF]

Love finally seeing a picture of the grey. I’ve got one coming for my 300 prc. Is that the RS 1.2? I’m also looking at swapping my current scope for that one.

Yes, it's the new Maven RS 1.2. I've only got 25 rounds or so with the new scope, but I like it so far. Only minor problem I have is using the black center dot against a black target.

 

[ssgjpd]

Love finally seeing a picture of the grey. I’ve got one coming for my 300 prc. Is that the RS 1.2? I’m also looking at swapping my current scope for that one.

Me too, as I have one on order and plan to order another one.

 

[Pwb199]

21” 300 wsm from Crown Ridge
10x SWFA
Silencerco Hybrid

Lots of notches in this one’s belt!

 

[ssgjpd]

Finally got everything in. Not the best pictures but I will get more once I start my load development.

XLR 4.0 MG Folding
Nightforce 2.5-10x42 with NF rings
Defiance Anti X SA
Proof 20"
TriggerTech Special
TBAC Ultra 7 (have Ultra 5 and Scythe in jail)

 

[ccoffey]

Got everything in! Big upgrade for the Christensen 300 prc. In addition to the XLR element mg, I’m going with the maven RS1.2. Happy with how this came out. XLR makes great stuff.

 

[camelcluch]

Element MG
Kratos Light
Proof 20”
419 Hellfire
MDT 3 rd mag
Trigger Tech Special
TBAC Ultra 5
7prc
Parts are ordered and in the waiting room.
Thinking about the NF NXS 2.5-20.

 

[Quicksilver]

Got my tikka action back, now just need barrel. Action, chassis, mag, brake, scope and rings is a 97.5oz.

 

[WesternDawg]

Anyone come up with a way to guard the chassis from cold? I hate touching the heat sink in the winter.

If you’re talking about the cheek rest.

Smoke Carbon Cheek Rest Foam

Replace old or worn foam on your Smoke Carbon Buttstock with these factory replacements that are pre-cut to the proper dimensions. Great texture and just the right amount of cushion. Peel-and-stick design-no adhesive is necessary.

xlrindustries.com

 

[Tweber]

View attachment 661687

XLR 4.0 Magnesium
Tikka action
22" Hells Canyon Armory chambered in 7 max
Maven RS1.2 2.5-15
Warne mountain tactical rings
Anarchy Outdoors 20 moa base

The gun as pictured weighs 9.5 lbs. Should finish at 11 lbs with the can and bipod.

How do you like the Maven. I am doing very similar rifle build and am leaning heavy twards the Maven Scope

 

[JMF]

How do you like the Maven. I am doing very similar rifle build and am leaning heavy twards the Maven Scope

So far I have no complaints, but I haven't shot it much either. 20 or 30 rounds at the range, no actual hunting or field use yet.

 

[Fever Buck]

XLR Magnesium Element 4.0 w/ Ergo Grip, Folder, and Carbon Stock
Defiance anTi Action
Proof Sendero 22”
Triggertech Special Flat 3.5lb
Hawkins Precision Ultralight Tactical Rings
used to be Mark 5 now NXS 2.5-10 MOAR
Thunderbeast Brake
Thunderbeast Ultra 7

Comes in close to 9.5 lbs fully loaded.

 

[Jim Row]

Got my tikka action back, now just need barrel. Action, chassis, mag, brake, scope and rings is a 97.5oz.View attachment 699324View attachment 699325

What was action weight before the work done to it?

 

[Quicksilver]

What was action weight before the work done to it?

28oz no trigger
24oz after lightening
23oz after bolt handle

 

[Quicksilver]

It’s done finally. 8lbs 4oz no bipod

 

[Nine Banger]

Here's what we are running for 5 year old right now.

He picked the color.

Bergara B-14R Steel

Bushnell TRS-25

Griffin Checkmate

Will get a Maven RS1.2 on it soon and then once that acclimation period is over I have a Defiance Classic to put a 223 barrel on with a Scythe Ti.

 

[Hnthrdr]

Have components on order

Tikka action: 30oz
4.0 magnesium element: 22oz
Grip and stock: 15oz
xcaliber 20” cf barrel 6mm cm: 36oz
MDT 3 rnd mag 2oz
Trijicon 2.5-15. 21oz
Direct thread dead air nomad ti 9oz

Total weight should be: 8.4ish fully loaded. I used to go after light weight rifles 5ish lbs, but for me under 9lbs fully loaded is pretty damn good and they are just really really shoot able

 

[Hnthrdr]

I’ll have to weigh it but grabbed an xlr element 3.0 for 340$ my savage 16 LWH which is accurate, but has one of the worst stocks around. Not sub 7lb gun anymore but it is awesome to shoot! Plus I won’t feel bad at all about rebarreling that rifle now that it has a decent stock on it

 

[davidinoregon]

Very inspiring builds! I hope to build one soon.

 

[Wrench]

If you’re talking about the cheek rest.

Smoke Carbon Cheek Rest Foam

Replace old or worn foam on your Smoke Carbon Buttstock with these factory replacements that are pre-cut to the proper dimensions. Great texture and just the right amount of cushion. Peel-and-stick design-no adhesive is necessary.

xlrindustries.com

I meant the forend. That mg gets cold... like gloves stick to it cold.

I'm good with everything except the smoke stock. I killed a bull and was under him rolling it for a position shift. He came down hill and I jumped out of the way....except a tree branch stuck through the stock and stopped me. I was able to jump and kick my toes up as the bull hit my knees....but I nearly got smoked. I am looking to close up the center hole now so that can never happen again.