Which Western Precision Sight?

[lintond]

I’m a bit overwhelmed with all the options for Williams sights…

Being a newbie which peep site should I get to pair with the front globe. The micro adjust or the standard peep?

Planning to put on a CVA MR-X for Colorado as its maiden voyage.


Sent from my iPhone using Tapatalk

 

[Gila]

I have the standard peep on a Knight and it is a pita to adjust when sighting in. I recently bought an Optima V3 and installed the micro-adjust. If you install the micro-adj set the elevation and windage to mid-range. Laser bore-sight at 50 yards and it should be close. That was with a 1/4” cheek riser. I suggest buying the .019 green or red fiber optic post for the globe. At 50 yards each click on the micro-adjust was around 1/5 MOA. A Gehmann Iris PH510 will fit the mirco-adjust aperture threads if you are so inclined.

 

[lintond]

I have the standard peep on a Knight and it is a pita to adjust when sighting in. I recently bought an Optima V3 and installed the micro-adjust. If you install the micro-adj set the elevation and windage to mid-range. Laser bore-sight at 50 yards and it should be close. That was with a 1/4” cheek riser. I suggest buying the .019 green or red fiber optic post for the globe. At 50 yards each click on the micro-adjust was around 1/5 MOA. A Gehmann Iris PH510 will fit the mirco-adjust aperture threads if you are so inclined.

I kind of figured the micro would be handy. I curse not having micro when I adjust my bow.

That aperture looks interesting. Is that mainly for a more precise aim/alignment with front sight or better light control?


Sent from my iPhone using Tapatalk

 

[Gila]

Sight alignment. An Iris gives light control but I don’t think I want or need to use it with my current prescription. Blade sights tend to “hide” part of an animal at MZ ranges. The small fiber optic “dot” at the top of the post in the globe contrasts well during sunrise and sunset low light conditions. I like the target knobs for quick adjustments on the micro-adjust version to get sighted in. It is the best solution for me but I am new to MZ like you are.

 

[Matt5266]

I just bought and installed this the other day. Been waiting for the rain to stop so I can go shoot it. Front sight screw on the original front sight was stripped I had to cut the sight off. Ordered the .19 green dot insert that I put in. Installation was easy, hopefully all goes well when I go out

 

[pods8 (Rugged Stitching)]

I've said it repeatedly already (many times) but I like the pic rear rail peep combo (williams and eabco both make one), it provides a long sight radius, higher rear sight option and allows a scope you be put on/off (when legal) without touching the rear open sight.

 

[chicoredneck]

I've got no idea what your marksman capabilities are, but would you say you're much more accurate at 300 or 1000 on any given day?

I just bought and installed this the other day. Been waiting for the rain to stop so I can go shoot it. Front sight screw on the original front sight was stripped I had to cut the sight off. Ordered the .19 green dot insert that I put in. Installation was easy, hopefully all goes well when I go out

I installed and used this sight on a MZ last year. It’s very precise, but does not allow enough light in low light shooting. In fact, that’s a problem with all peep sights I’ve used. I’m considering going back to a notch and blade style sight as you get much better low light performance.

 

[Gila]

I've said it repeatedly already (many times) but I like the pic rear rail peep combo (williams and eabco both make one), it provides a long sight radius, higher rear sight option and allows a scope you be put on/off (when legal) without touching the rear open sight.

The problem with both is that some models of MZs won’t fit either one because the scope base holes are all different dimensions even between models of the same brand. Neither one will fit my Knight Disc Extreme. Williams won’t fit the Accura LRX or MRX. Those are all very popular MZs.

 

[pods8 (Rugged Stitching)]

The problem with both is that some models of MZs won’t fit either one because the scope base holes are all different dimensions even between models of the same brand. Neither one will fit my Knight Disc Extreme. Williams won’t fit the Accura LRX or MRX. Those are all very popular MZs.

I'm 99% sure I have the Williams rear site on my Accura MRX.

 

[Gila]

EABCO does but the front sight height is a consideration.

 

[pods8 (Rugged Stitching)]

EABCO does but the front sight height is a consideration.

I have the EABCO on my optima v2 and the Williams on my accura mrx, both paired with the Williams front globe. No issues.