whats your hunting arrow for 2014. shaft, fletch, nock, braodhead

[rodney482]

I am using two

Carbon Express max hunter, Blazer, QAD, VPA 100 gr vented

Black Eagle, Zombie Slayers, Blazers, factory nock, VPA 100 Gr vented.


** I will be trying some rage hypos on thunder chickens

 

[5MilesBack]

Same as the last 5 years......Trophy Ridge Crush 300's with QS Speed Hunters, Bohning A-nocks, and 125gr Shuttle T's, Wac'ems, or maybe a Spitfire.

 

[doverpack12]

Carbon Express Maxima Hunter 350 with type 1 insert and a gold tip 20 gr screw in weight with a 4 inch onestringer wrap and 3-Flex fletch SK 200 vanes. Broadheads are either 100 grain shuttle T/Terminal T or Ulmer edge broadheads.

 

[trkyslr]

Easton axis 340, 5" wraps, aae max hunter vanes, vpa solid 125's.. 455 grains total

 

[tipsntails7]

easton axis 340 at 27" with 50 grain insert. QAD Exodus 125's. 3inch fusion vanes 475grains

 

[Rucker61]

Easton Axis 340s, 28", HIT insert, Magnus Buzzcut 100s (testing 125 field points now), factory wrap removed, Blazer vanes.

 

[amp713]

still up in the air! haha

 

[realunlucky]

Gt pros 4 inch wraps with blazers. Thinking about switching from blazer but have used the same for about 5 seasons now

 

[vcb]

Easton axis 300's, deep six insert, quad exodus fixed blade broadhead, 4" custom wrap, blazer vanes 3 with right helical, standard axis f nock.

However I'm always experimenting!

 

[AitchAr]

Gold Tip Kinetic XT 300, accu-tough insert, 20gr weight, 4" wrap, four fletch 2.3" vanetec super spine, accu-tough nock, and 100gr QAD exodus full blade. 500gr total weight. 13% FOC.

I'm going to pick up some of the steel Ulmer edge and try them out. Also thinking about trying a lighter arrow. The Easton axis seems popular in this thread.

 

[Evan Williams]

Easton INJEXION 330 w/ 4" bohning wrap and 4 fletch AAE vanes ( not sure between 2.3" and Pro Max yet with a Ramcat/Grave Digger

 

[mattstanton]

GT kinetic XT 300's with G nocks. 7" wraps, 3 AAE max hunters on one end and a 100gr shuttle T on the other end. Total of 485gr.

 

[Nick Muche]

For you guys shooting Kinetics... Have you had the pleasure of bending an outsert yet? I loved those arrows but it doesn't take much to render them useless. Their outsert design is horrible.

 

[rutfest]

Black Eagle X - Impact 300's, black eagle outsert, pin nocks, 3"Flex Fletch Silent Knights, Solid Broadheads 125 grain

 

[Bowhuntr64]

Easton Injexions, 400 spine, Blazer vanes, Easton nocks, and QAD Exodus Deep Six Swept heads.

 

[Archelk]

For you guys shooting Kinetics... Have you had the pleasure of bending an outsert yet? I loved those arrows but it doesn't take much to render them useless. Their outsert design is horrible.

Elk- GT 300 Kinetics with 20 gr. insert, Accu-tough insert and nock. Blazers and 125 gr. Helix single bevel broad head. Somewhere around 495 gr.
I have had zero issues with the outserts thus far and it's been over two years. I have hit rocks with em and the only time I had an issue is when I hit a steel post holding my target up. Outsert did not break but the shaft behind cracked.
Buffalo- Easton 300 FMJ's GunMetal with 75 gr. brass insert. 125 gr. Helix single bevel broad head. Somewhere in the 525 gr. range I believe.

 

[carpssublime]

gold tip xt hunters with 3" vane and 100 grain slick trick head

 

[Craig Van Arsdale]

Same as last year. Gold Tip big game 100's 125 gr slick trick mags and 4 Fletch with a wrap weight is 511gr.

 

[OR Archer]

Switching to FMJ Injexion 400s with a 4" wrap and three fletched Blazers. Going to run Muzzy Trocars again this year.

 

[dreamingbig]

Keeping it simple and staying with GT pro hunters in 7595 with camo finish for the extra weight. 125 grn shuttle Ts plus an additional 40grn insert in back of std gold tip insert. 4 fletch with blazers plus custom wrap