What did you do in the reloading room today?

[waspocrew]

My 300 PRC is almost ready (need to pick a scope), but staring at a new box of lapua brass that needs uniformed, primed, and loaded. Will probably just load up a box of 208 ELDMs to break in, then get serious with the 215 Hybrids.

 

[pender1]

Where did you get that work bench as I'm currently looking at options

Sent from my SM-S926U using Tapatalk

It's just a Waterloo toolbox that I added a wood top to. Don't think Waterloo is still in business.

 

[bajeep93]

Loaded some 6.5 creedmoor and 6 creedmoor today.

Sent from my iPhone using Tapatalk

 

[BPT0586]

Prepped a bunch of 223 brass. Got the urge for one of the new 8 twist Remmy 700s and I aim to scratch it soon. Just debating between blued of the stainless fluted version.

 

[Ohiohuntr]

Just annealed 100 rnds of 308, prep 50 rnds of7prc and primed, decapped 50 as well

 

[Darren_8167]

Trying out some new primers for the first time. White River LR. loaded up two of my pet loads to try them.
Loads are for Tikka T3X 30-06 and a
Tikka T3X SL 6.5 CM.

 

[Torque]

The wood has finally dried so, up on the wall it goes. It is all red, white and pin oak. This completes the wall sheathing for the reloading room and the entire shop and finishes the lean-to on the outside. Now. to start joining the bench tops together and run the electrical outlets. One more step down.

 

[Megastink]

I loaded a few three-shot test loads for my 6.5 Grendel and my 6x45 bolt gun. I switched from the 87gr Berger VLD h to 87gr Hornady VMax. Hoping to find good accuracy so I can start killing stuff with them.

 

[sierracharlie338]

Prepped a bunch of 223 brass. Got the urge for one of the new 8 twist Remmy 700s and I aim to scratch it soon. Just debating between blued of the stainless fluted version.

Man if my 9 twist didn’t shoot the 69smk/TMKs so well I’d be in the same boat.

 

[49ereric]

Found some good deals on 357 mag brass. Norma brass and I checked the primer flash hole and it is the normal size as my Lee classic loader deprime pin easily fits. Ended up being just under .14 shipped

.357 Mag Pistol - New Brass - Norma - 500pcs

Shop New .357 Magnum brass cases for reloading. Load new .357 mag brass cases with a Capital Cartridge 158gr bullet. Shop brass and bullets at Capital Cartridge today!

capitalcartridge.com

Bottom link is primed Norma brass. No clue as what brand of primer so passed cuz I only use mag primers in case I need ammo to work when it is -20° or -40°
Hard to beat price for primed brass.

357 Magnum Brass - Brand new Primed Brass

New Primed 357 magnum Brass

ravenrocksprecision.com

 

[ironworker378]

Added some small features to my bench.
- Duct tape pen holder on the left
- Labeled the shell holder nails
- Small shelf to keep some powder out
- Laminated the shell holder/brass chart
- Laminated the powder burn rate chart
……(not shown)
- Updated my 10mm Auto data for two new loads (below)
- Getting ready to load some 155 XTPs, 180 XTPs, and maybe some 200 gr. WFNGC. Something to do for the weekend. I may go do some plinking with my 1911s.
View attachment 816529

I'm sorry, bro, but you don't have enough powder to justify your well-organized reloading bench. LOL

 

[ironworker378]

257 WBY MAG annealed and loaded up 115 Bergers in front of 73.2 grs of N570 for a speed of 3330 FPS . Zero pressure signs

 

[sierracharlie338]

257 WBY MAG annealed and loaded up 115 Bergers in front of 73.2 grs of N570 for a speed of 3330 FPS . Zero pressure signs

That’s scootin’! Killed anything with that round?

 

[ironworker378]

That’s scootin’! Killed anything with that round?

Not with this specific load. I sure hope I can draw a tag this year.

 

[JasonWi]

Loaded 49 rounds of 7mmRM today
ADG brass
Fed 215 primers
168 VLDH
65.0 grns RL 22

 

[Huntingfarandwide]

Loaded 308s

Remington Brass
Federal 210
Varget - IMR4064 - IMR4895
Hornady 150 Interloks
Barnes 150 TTSX
Hornady 168 AMax

We will see the results when the weather breaks.

 

[ironworker378]

300 Win Mag Norma brass
215 primer 77.5 grs Winchester WXR
168gr Berger VLD Average velocity 3260FPS

 

[Sdvldog1371]

Loaded some 9mm 94gr frangible rounds to test. This morning didn't go great. If I can get it to run without blowing up my pistols I will be happy. They were 4.7 cents a pop. Less than half what I've been paying for jacketed bullets. Lead was too dirty for plinking, so hopefully this works out.

 

[5811]

I set up to start reloading for my first time today.

Stuck 2 of my first 10 223 cases in the FL sizing die and called it a day. After I stuck the first one and got it out, I thought, I used plenty of lube, there's no way that happens again.......

 

[WestTN2288]

Loaded some 9mm 94gr frangible rounds to test. This morning didn't go great. If I can get it to run without blowing up my pistols I will be happy. They were 4.7 cents a pop. Less than half what I've been paying for jacketed bullets. Lead was too dirty for plinking, so hopefully this works out.

What’s your load?