What did you do in the reloading room today?

[49ereric]

Got some cb1138-12 wads and now ready for more pull down of S&B 2 3/4 9 Pellet 00 and get rid of the fiber wad and insert cb wad with 6 pellets add buffer. Saves @5/8 lb of buck per box of pulled down. Extraction from my Stevens 311 was easy and much better pattern at 25 yards. Cheap buck made better…

 

[Dos XX]

Finally got my reloading table set up and ready. Since I moved houses a couple of years ago I've been here and there cobbling things together and haven't done much loading. My wife was cool with me setting up in the back bedroom as long as it was organized, so this is what I came up with. The drawers are even lockable when the family with kids come into town. Getting ready to start working up loads for my wife's .223
View attachment 820695

What is that bolted to the top? Is it steel? Is for more support or rigidity or for a work surface ?

 

[pender1]

What is that bolted to the top? Is it steel? Is for more support or rigidity or for a work surface ?

It's a 1" table top I cut out of an old lab work table that I had. A good heavy wood surface is much better than a flimsy steel top to work on. The presses are bolted to thread inserts in the wood top then the wood is bolted to the toolbox using crimp style nut-serts.

 

[realunlucky]

Finally got my reloading table set up and ready. Since I moved houses a couple of years ago I've been here and there cobbling things together and haven't done much loading. My wife was cool with me setting up in the back bedroom as long as it was organized, so this is what I came up with. The drawers are even lockable when the family with kids come into town. Getting ready to start working up loads for my wife's .223
View attachment 820695

Where did you get that work bench as I'm currently looking at options

Sent from my SM-S926U using Tapatalk

 

[waspocrew]

My 300 PRC is almost ready (need to pick a scope), but staring at a new box of lapua brass that needs uniformed, primed, and loaded. Will probably just load up a box of 208 ELDMs to break in, then get serious with the 215 Hybrids.

 

[pender1]

Where did you get that work bench as I'm currently looking at options

Sent from my SM-S926U using Tapatalk

It's just a Waterloo toolbox that I added a wood top to. Don't think Waterloo is still in business.

 

[bajeep93]

Loaded some 6.5 creedmoor and 6 creedmoor today.

Sent from my iPhone using Tapatalk

 

[BPT0586]

Prepped a bunch of 223 brass. Got the urge for one of the new 8 twist Remmy 700s and I aim to scratch it soon. Just debating between blued of the stainless fluted version.

 

[Ohiohuntr]

Just annealed 100 rnds of 308, prep 50 rnds of7prc and primed, decapped 50 as well

 

[Darren_8167]

Trying out some new primers for the first time. White River LR. loaded up two of my pet loads to try them.
Loads are for Tikka T3X 30-06 and a
Tikka T3X SL 6.5 CM.

 

[Torque]

The wood has finally dried so, up on the wall it goes. It is all red, white and pin oak. This completes the wall sheathing for the reloading room and the entire shop and finishes the lean-to on the outside. Now. to start joining the bench tops together and run the electrical outlets. One more step down.

 

[Megastink]

I loaded a few three-shot test loads for my 6.5 Grendel and my 6x45 bolt gun. I switched from the 87gr Berger VLD h to 87gr Hornady VMax. Hoping to find good accuracy so I can start killing stuff with them.

 

[sierracharlie338]

Prepped a bunch of 223 brass. Got the urge for one of the new 8 twist Remmy 700s and I aim to scratch it soon. Just debating between blued of the stainless fluted version.

Man if my 9 twist didn’t shoot the 69smk/TMKs so well I’d be in the same boat.

 

[49ereric]

Found some good deals on 357 mag brass. Norma brass and I checked the primer flash hole and it is the normal size as my Lee classic loader deprime pin easily fits. Ended up being just under .14 shipped

.357 Mag Pistol - New Brass - Norma - 500pcs

Shop New .357 Magnum brass cases for reloading. Load new .357 mag brass cases with a Capital Cartridge 158gr bullet. Shop brass and bullets at Capital Cartridge today!

capitalcartridge.com

Bottom link is primed Norma brass. No clue as what brand of primer so passed cuz I only use mag primers in case I need ammo to work when it is -20° or -40°
Hard to beat price for primed brass.

357 Magnum Brass - Brand new Primed Brass

New Primed 357 magnum Brass

ravenrocksprecision.com