What did you do in the reloading room today?

[Austin Kaufman]

Loaded up some Berger 85.5 hybrids for my 223. 1:8 twist barrel but shot 5 different loads very well. Going to try a few grains more tomorrow because I never hit pressure. After that I’ll pick a load and try them at distance. All the loads were 2500 fps up to 2640 fps. Final loads should be between 2640 and 2700 fps. Pretty happy with that out of my 223 with 20” barrel. Loaded them at 2.310 coal and they fit just right in my howa mini mags. Probably will end up rebarreling in the future to a 1:7.5.

Sent from my iPhone using Tapatalk

 

[MacJenkins]

Loaded up some more 7PRC. 3 times fired ADG with a 168LRX and 68.6 H1000 for 3035fps out of our 22” gun UM built for us last year. Primer pockets are still holding up.

Then started brass prep on 22 Hornet as P Dog season is right around the corner. My kids usually go through 300-500 rounds a day.

 

[Nykki]

I've got a m70 in 375h&h that really likes the Speer 235gr Hot core. I load it with 70.5gr 4064, rifle stacks them at a hundred yards. I have two boxes of 235gr Barnes tax that have been on the shelf for a couple years so I loaded up a dozen with 73.5gr of IMR 4895 gonna see if the rifle likes it.

 

[49ereric]

Primed 300 223 mixed cases yesterday.

 

[Castle Rock]

Loaded up some Berger 85.5 hybrids for my 223. 1:8 twist barrel but shot 5 different loads very well. Going to try a few grains more tomorrow because I never hit pressure. After that I’ll pick a load and try them at distance. All the loads were 2500 fps up to 2640 fps. Final loads should be between 2640 and 2700 fps. Pretty happy with that out of my 223 with 20” barrel. Loaded them at 2.310 coal and they fit just right in my howa mini mags. Probably will end up rebarreling in the future to a 1:7.5.

Sent from my iPhone using Tapatalk

Please post up your results.
I use the 88 ELDMs in my 223out to 1500 yards with great results and have used a heap of 80.5s but thought the 80.5s might have been asking a bit too much.

 

[Matt5266]

Loaded up another 100 rounds of 147 grain 9mm subs in the garage while the kids enjoyed the 70 degree weather today in Idaho

 

[Glimmerman151]

I built a little stand for my trickler setup on my lab scale. Also mounted the primer seating depth checker I machined as well. Seems to work pretty damn good. I just couldn't get myself to drop 850 bucks for the primal rights version, so i found a way to make one for myself.

 

[Austin Kaufman]

Please post up your results.
I use the 88 ELDMs in my 223out to 1500 yards with great results and have used a heap of 80.5s but thought the 80.5s might have been asking a bit too much.

Will do! I’ll post up some groups and then see how they end up at distance with the hotter loads. Hoping to get out today but may hold off with the 30-40 mph winds.


Sent from my iPhone using Tapatalk

 

[Briant_az]

View attachment 1033972I built a little stand for my trickler setup on my lab scale. Also mounted the primer seating depth checker I machined as well. Seems to work pretty damn good. I just couldn't get myself to drop 850 bucks for the primal rights version, so i found a way to make one for myself.

How well does the depth gauge work? Great idea and I’m always impressed with the things that guys are able to make themselves. I wish I had that kind of skill.

 

[Glimmerman151]

It works incredibly well. Way easier than trying to use the stem of a caliper sticking out the bottom. This way i know the primer at least has the anvil seated and the cup shouldn't shift forward from the primer strike.

 

[mtnbound]

Spun on a new 6CM barrel on my Tikka, so I did some load development today. H4350 and N555 are my tried and trued but gave some Superformance, Hunter, and 4831SC a go along with a few of the new 107TMKs. Superformance had a big ES of over 120fps but still gave a great group.

 

[Austin Kaufman]

Please post up your results.
I use the 88 ELDMs in my 223out to 1500 yards with great results and have used a heap of 80.5s but thought the 80.5s might have been asking a bit too much.

Ran a few more loads with the 85.5 hybrids with the 223 today. Never hit pressure but I found a load I’ll probably run with. I usually do 10 shot groups of everything but I had already done that with a few of these so I did 3s and then a 5 shot for a new load. The load at 2553 fps was 0.45” 3 shot and yesterday it was a 0.7”-0.8” 10 shot group. The 2613 fps load was 1.18” and the 2678 fps was 1.2”. I may try one more hotter load but with the low SDs, spread, and accuracy of the load at 2553 I’ll just roll with it most likely. The other hotter loads were good enough 10 shots but I’m just picky. This gun isn’t really a gun to shoot bug holes though. I usually shoot 73 ELDMs or 77 TMKs and the loads for those are in that 0.7-1.2” 10 shot groups as well. Excited to see how the 85.5s are at distance.

Sent from my iPhone using Tapatalk

 

[snuzzo29]

Prepped some new 270win brass.

 

[nphunter]

Modified my Redding die with two part putty so it would stop leaving rings on my long skinny bullets.

Worked great, no more nose rings. Use it to load up 50 rounds of .243 ammo and it worked great. Not sure how much the dented rings mattered because they shot great but I couldn’t handle seeing them squished and marked up.

 

[longranger1965]

Ahh the Lazzeroni. I’ve had it since 2004 and it was the primary rifle for 15yrs. Haven’t shot it much the last couple and then my oldest went back to it this year.
Honestly, I wouldn’t recommend someone going out and getting one unless you really just want to dink with a fun caliber. The Lazzeroni is like justifying to your wife why you decided to buy a Ferrari for your economical commuter rig.
That said, it does hit like the hand of god. I originally shot 180s Mach 2, reduced the powder charge well under max and my brass life was great for any magnum and it was still ridiculously fast. We’re sending 230 Bergers now.

 

[Austin Kaufman]

Loaded up 55 rounds of 6mm arc with alpha brass, lever, and 107 SMKs to shoot some steel. Sized 250 pieces of 223 brass to load tonight.


Sent from my iPhone using Tapatalk

 

[NWBLKTAIL]

Loaded a new batch of 100 Starline 5.56 brass for 223 with 75Eldm

And resized, trimmed and loaded 50 rounds of Starline 243win with 108 elite hunters

 

[Nykki]

I bought my hunting partners collection of guns and reloading equipment. He had Alzheimer's and I don't trust his reloads. I pulled his 30.06 stuff apart and dumped the powder cleaned up the brass and neck sized it with my old Lee Loader haven't decided what bullet I want to load up.

 

[49ereric]

Primed 300 more 223 mixed cases over the last couple of days here and there.
2-300 more to go…

 

[brandonh98]

Still trying to find a decent load for my bergara b14 carbon in 7mm prc. This has been quite the journey getting this rifle to shoot well.