What did you do at the range today?

[JohnJohnson]

I put 120 rounds through my new Springfield Kuna today as well as another 300 rounds through the Sig P211. I just got the Kuna but I already put the short stroke buffer kit in it and switched the polymer backplate for an aluminum one. The recoil was very tame and I didn't feel any concussion at all while shooting it.



The P211 is now on 1,000 rounds and it's been flawless for the last 955 rounds after 3 FTRBs in the first 45 rounds during the break-in. Trying out some Mag-Mo edge grips for it right now and they certainly work well.



And I'm still waiting another 4-6 weeks for my CZ Shadow to finish getting Cajunized. I predict my 9mm ammo budget is going to balloon.

 

[Chris in TN]

Another group with the short CZ. It’s a 457 pro varmint, fwiw. Meopta 2-10pa. I only mention the scope because I butterfingered it this morning and it landed on my bench pretty firmly. Didn’t budge. Poi same as yesterday.

So, this is 15 shots with the rifle’s usual can (DAM). I suspect this ammo is just going to do what I expect cheap ammo to do - have fliers. For the price I can happily live with it. I’ve seen individual lots of CCI SV do the same. 1.5” outside but 12/15 in 0.75” at 40 yards. I’m buying another brick while it’s available.

Also, in fairness, shooting groups with the loose rounds that fell out of the box, might not have been the fairest way to assess ammo.

 

[ColPenguin]

I have a bunch of 140 grain FMJ Aguila 6.5 CDMR from when ammo was kind of hard to find. It shoots terrible.

I pulled bullets and weighed the charges to try and troubleshoot it. It was some type of ball powder, and it was between 41.2 - 41.6 grains. So whatever the problem, it's not the powder charge.

When I have decapped these cases, the flash holes are off center and primer pockets are crimped. I have no desire to fuss with the brass after shooting through these.

The bullets have open hole in base where lead was poured into the jacket. The bearing surface on the bullets was all scratched up. So maybe it's either a really crappy soft alloy, or neck tension is just too tight?

After just pulling bullets and reseating this group seemingly tightened up. I didn't take a control group to the range with me today to compare though. As far as I can tell, past problems, are likely some inconsistency with their neck tension or seating.

 

[Q_Sertorius]

I made it to the range for three days in a row this week, but none of the sessions was as long as I wanted.

Tuesday, I drove to my old SOT to pick up the Unknown Suppressors OG Prototype 6mm suppressor I got on Black Friday. I forgot my wallet, so I got to drive all the way back home and repeat the trip. On the way back, I stopped off at the range to sight in the stainless Tikka T3X .243 on which it is going to live.

It shoots well and sounds very nice. About like an OG 6.5.

After that, I shot steel with the Tikka T3 at 300 yards. I am focusing hard on drills going from all gear on, rifle in condition 1, scope zeroed out, to building a position and shooting prone over pack or bipod or seated over bipod.

Wednesday, I took the .243 back to the range and used it for positional drills, adding in the timer. I find it very tough to get more than one good shot off in 20 seconds. I am using the .243 for this because I want to get some rounds down the barrel before I start working up a load. And the Hornady factory ammo I have is very mild. It doesn’t shoot insanely well, so I have no reason to save it, but well enough to use for this purpose. And I hope to have the time to test and reload a pile of 116-grain TMKs this weekend.

Today, I shot the Tikka T3 with some of the Frontier 5.56, using the AB Raptor 10 and my new Airlock Nano.

I really like the Nano, but the mirage builds up very quickly and it gets very hot.

 

[Chris in TN]

The wife is out of town, I'm caught up at work, and it was dead calm this morning and I'm still getting to know this new .22lr ammo.

The kids and I shot a bit yesterday (.22s at 175-225 yards) and while we were out I painted my 225-yard barn target. So it was cleanly painted this morning. Or as close as it gets with cheap paint. I took the 24" CZ457 and dialed 28 minutes (this scope maxes out at 29.5 and I try to avoid the very end of travel) and held another 4moa in the reticle - that's the same BC as CCI SV but with the velocity adjusted to match the new ammo, and has worked perfectly thus far.

Anyway, I shot 15 shots with the Scheel's-Federal bulk ammo. Best I can tell, the group was about 3.9moa tall and 1.9moa wide. Given that I observed an ES of 44 to 60 with this ammo the other day, I expected to have 2+ moa of vertical spread over and above my horizontal at 225 yards, so the group was, in my opinion, for ammo of this price, pretty darned excellent. Of course, this is bench shooting, and my actual field position groups will likely be larger, but, the takehome point is, this ammo is a great value, IMO.

I halfway intended to go measure the group (instead of just estimating size using 2moa reticles hashes) but junior walks into the barn and asks if he can shoot a few shots, so, no photos, as the group grew a bit.

I ordered another box of this ammo last night. Two boxes is ~3804 rounds and will last a long time.

 

[Matt5266]

Shot a little 9mm from the staccato, then put the Tikka 223 on steel at 612 yards up in a canyon. Wind was variable and switching often l, wind speed was mostly around 10mph. I was about 23 out of 30 shots on a 12x18 steel silhouette. Good fun

 

[waspocrew]

Working on subsonic 38 Special in a 16” Marlin lever rifle. Using Bullseye and 125 gr plated projectiles, 4 grains of powder netted ~ 1000 fps. That was good enough for me. Came home and loaded 500 rounds. Should be fun, cheap, shooting.

 

[RockAndSage]

Working on subsonic 38 Special in a 16” Marlin lever rifle. Using Bullseye and 125 gr plated projectiles, 4 grains of powder netted ~ 1000 fps. That was good enough for me. Came home and loaded 500 rounds. Should be fun, cheap, shooting.

That's gotta be an absolute blast to shoot. Are you suppressing it too?

 

[waspocrew]

That's gotta be an absolute blast to shoot. Are you suppressing it too?

Yes sir! I bought a SiCo Hybrid 46 a few weeks ago. Way too much fun.

 

[RockAndSage]

View attachment 1050447

The thought just crossed my mind about what an incredibly useful truck-gun that would actually be, especially if a selection of those subs and heavy .357 stuff was kept with it too. Talk about versatile...

 

[waspocrew]

The thought just crossed my mind about what an incredibly useful truck-gun that would actually be, especially if a selection of those subs and heavy .357 stuff was kept with it too. Talk about versatile...

Do it!

 

[justinspicher]

Did a Friday no lights night with the boys. Did a few movement drills between 25-50yds under nods. That’s never not a good time.

 

[Matt5266]

38s supressed is one of the most fun guns ever

 

[B_Reynolds_AK]

Shot a 10 round group with 88 TMK's from the 223. First load combo tried with a new powder and primer.
ADI Brass, 25.0 Lever, CCi 450's.

 

[Gaia]

My new semi-custom Tikka T3X 6.5 CM w/ 20" barrel, wooden RokStok, SWFA 6x, AB Raptor 8 w/ 3" reflex. 10.0 pounds. 45.75" long.

This rifle also experienced an unexpected drop test. The magnum rifle shooters interrupted my string to ask me to please go cold. Flustered, but not wanting to offend anyone since I literally joined yesterday, I left it on the bag. And it promptly fell three feet onto concrete. Zero did not shift (but the brand new AB suppressor took the brunt of the fall).

Shooting AAC 140-grain FMJs (cheapest ammo I could find at the time). On the box velocity of 2700 FPS. Fired 54 rounds, got an average FPS of 2508 with Std Dev of 31.

I had a bit of mirage, despite the suppressor cover, by the time I got to this group. That, and I suck.

Geez, that's a really nice looking rifle. Funny enough. I bought a rikka super lite. I like it but don't love it. I am getting back into bolt guns. So in looking to build a 18" shorty tikka. But right now I'm looking to take my tikka out of the krg bravo it's in and place it in a bag composite

 

[ColPenguin]

Shot a 10 round group with 88 TMK's from the 223. First load combo tried with a new powder and primer.
ADI Brass, 25.0 Lever, CCi 450's.

View attachment 1050481

That group is unreal. Wow.

 

[Chris in TN]

Shot a 10 round group with 88 TMK's from the 223. First load combo tried with a new powder and primer.
ADI Brass, 25.0 Lever, CCi 450's.

View attachment 1050481

Well if that's the best you can do I guess it's OK. lol.

Seriously, that's fine shooting.

 

[43.6N]

Shot a 10 round group with 88 TMK's from the 223. First load combo tried with a new powder and primer.
ADI Brass, 25.0 Lever, CCi 450's.

View attachment 1050481

Good grief. That’s got to be such a good feeling after dealing with the NAS cases and the pierced primers.
I’ve got a half pound of lever, and plan on a little peer review of this combo lol.

 

[JohnsIsl]

Played around with my new 6 GT. Pretty happy with the load, shooting was just so so.

What are you all using for ear protection these days? I like to double plug it, but finding that muffs get uncomfortable after a while and can interfere with some stock combs.

 

[RockAndSage]

Played around with my new 6 GT. Pretty happy with the load, shooting was just so so.

What are you all using for ear protection these days? I like to double plug it, but finding that muffs get uncomfortable after a while and can interfere with some stock combs.

View attachment 1050678View attachment 1050679

Plugs and muffs shooting anything unsuppressed, and it varies with suppressed guns. Usually just the plugs if the muffs are getting in the way. Mack's silicone putty plugs are pretty effective, and cheap.