Want a 7-300 prc. Need some help.

[AirborneA$$hole]

Not sure where to start. Will a standard long action work or do I need a magnum action? Also, anyone know of any good gunsmiths in the Midwest that can spin up a 7-300 PRC barrel?

Additionally, I know you have to neck down the 300 PRC brass. Does anyone recommend a die that can do that? I recall hearing that short action customs had some good dies.

And lastly, what are some good powders to try? I'm looking to push 170 and 180 grain bullets as fast as accurately possible.

Thanks y'all!

 

[RockAndSage]

Not sure about 7-300 PRC, but I'm pretty sure @huntnful has had a couple of 7-300 NMI's made by @barehandlineman . Those builds are getting some impressive accuracy.

 

[TX_Diver]

@huntful rifle looks great.

West Texas Ordnance is another one that does a lot with the 7-300NMI.

I’m intrigued but want a 25-7PRC still first one day I think

 

[Schmo]

Not sure where to start. Will a standard long action work or do I need a magnum action? Also, anyone know of any good gunsmiths in the Midwest that can spin up a 7-300 PRC barrel?

Additionally, I know you have to neck down the 300 PRC brass. Does anyone recommend a die that can do that? I recall hearing that short action customs had some good dies.

And lastly, what are some good powders to try? I'm looking to push 170 and 180 grain bullets as fast as accurately possible.

Thanks y'all!

On your die, your best option is the Hornady Match Grade bushing die set. Just buy the appropriate bushing and you’ll be golden. This is exactly what I did for my 6 PRC, which is necked down 6.5 PRC brass. Hornady dies don’t get enough love

 

[blacktailcentral]

In my opinion the 7-300prc isn't enough gain over a 28 nosler. The 25-7 pro is pretty interesting as well!

 

[Schmo]

In my opinion the 7-300prc isn't enough gain over a 28 nosler. The 25-7 pro is pretty interesting as well!

28 Nosler is finicky tho, and has short FB when done to SAAMI spec.

 

[blacktailcentral]

28 Nosler is finicky tho, and has short FB when done to SAAMI spec.

The freebore is decent for 180 class bullets, the 195s aren't worth the squeeze in my opinion. Also there are a ton of good bullets from 175-180 for the 7mm

 

[V35B]

@huntful rifle looks great.

West Texas Ordnance is another one that does a lot with the 7-300NMI.

I’m intrigued but want a 25-7PRC still first one day I think

The 7-300NMI interests me as well. I built myself a 25-7 PRC to hunt with this year, I’m really liking it.

 

[barehandlineman]

The 7-300 is the best option for a big 7mm. To get a 28 done right its custom chamber anyway so might as well run lapua brass and get 7-300. 7-300prc imo isnt worth the hassle. I run 7-300nmi at what people claim to get with a 28 and shoots stupid small.

 

[philys21]

The 7-300 is the best option for a big 7mm. To get a 28 done right its custom chamber anyway so might as well run lapua brass and get 7-300. 7-300prc imo isnt worth the hassle. I run 7-300nmi at what people claim to get with a 28 and shoots stupid small.

What gunsmith did you use?

 

[barehandlineman]

What gunsmith did you use?

Me. High voltage armory