Vectronix Vector X 10x42mm Evaluation

Formidilosus

Super Moderator
Shoot2HuntU
Joined
Oct 22, 2014
Messages
9,999
This will be a field evaluation of the Vector X 10x42mm SMR rangefinding Binoculars. The binos came from Tim @Procision Arms who asked if I would do a review on them.


This eval will be similar to the one conducted for the- Revic BLR10b RF Bino Eval



Vector X 10x42mm

Specs:
can be found here-



IMG_2995.jpeg




The Vector X’s are a RF bino with ballistic data using Applied Ballistics, with two different etched reticles in the FOV.

The X’s are a bit larger than the Revic’s, and about the same as the Sig 10k’s.

(Leica Geovid 10x42/Vector X/Revic)
IMG_2989.jpeg





Reticles:

The SMR model has a cross in the center of the FOV with dots on each leg, as well as an L-shape reticle in the lower left.
IMG_3007.jpeg

IMG_3013.jpeg





RF Readouts:

There are three user selectable screens-


This is the “standard” screen. Displays yardage, elevation data, wind 1, wind 2, and the compass below all that.
IMG_3019.jpeg


This is the “profile” screen. It displays yardage, the selected gun profile, remaining velocity and remaining Ft-Lbs of energy.
IMG_3017.jpeg


This is the third screen- it displays yardage, wind 1, wind 2, Time of Flight (TOF), and the inclination (angle)
IMG_3016.jpeg



Yes, there is a lot going on in the FOV.




Controls:

The fire button for the RF is on the right barrel, the menu buttons are on the left barrel. They are small/unobtrusive and sometimes hard to feel.


Immediately it was obvious the focus wheel had significant play.

The focus wheel has not moved at all- that is just slop/backlash from left to right.
IMG_2993.jpeg

IMG_2994.jpeg




“Glass”:

Initial thoughts are the glass is fine. They are very similar to the Revics- maybe (?) a touch more resolution/definition. Maybe not. Side by side they certainly didn’t show the colors that Swarovski EL Range do, nor are they are as pleasing as newer Leica Geovid’s. More time will tell as this is just from 20’ish minutes on an overcast day.




Intial thoughts:

With only a bit of use in them, so far the X’s range well to at least 2,000 yards, and the ballistic data is populated quickly. The “eyebox is finicky to get right, the controls could be better, the reticle in the center of the FOV is distracting, the HUD is extremely busy, and the glass is fine.
 
OP
Formidilosus

Formidilosus

Super Moderator
Shoot2HuntU
Joined
Oct 22, 2014
Messages
9,999
Compared the Vector X to the Leica Geovid and Revics in very dark woods.

This was the ambient light-
IMG_3036.jpeg


All were functional well past legal light. However, the Geovids were brighter and showed better detail overall than either of the other two, regardless of background or item. The Vector X’s interestingly showed a touch more detail than the Revics on dark items such as tree bark, however in yellow/brown grass the Revics were as good- maybe just a touch better than the X’s.

The center “cross” reticle in the Vectors is visually distracting and annoying- don’t put reticles right in the center of where you look in observation devices.

The Vector HUD has a lot going on- especially in lower light. Even with the brightness turned down, the amount of “red” in the FOV makes it hard to see what is behind it, and the HUD stays illuminated for quite a while.
 
Last edited:

atmat

WKR
Joined
Jun 10, 2022
Messages
3,189
Location
Colorado
It’s funny you mention the slop in the focus wheel. The focus wheel on my Revics are so stiff that it’s my least favorite part of the binos.

Thanks for the review. Looking forward to seeing what comes out of it.
 

ljalberta

WKR
Joined
Dec 7, 2015
Messages
1,663
I’ll be following along, but it sounds like theres still room for a product that delivers both excellent glass for long extended observation periods, as well as top of the line ballistic and range finding performance.
 
OP
Formidilosus

Formidilosus

Super Moderator
Shoot2HuntU
Joined
Oct 22, 2014
Messages
9,999
It’s funny you mention the slop in the focus wheel. The focus wheel on my Revics are so stiff that it’s my least favorite part of the binos.

The 4x pair of Revic’s I’ve used, had “appropriately” stiff focus wheels- not much different than any butter foot binos. The Vectors, I cannot imagine you would be happy with. “Feeling” generally doesn’t bother me, but it is the cheapest, crapiest feeling focus wheel I have used- and there are lots of reports from others of it.
 

Wyo_hntr

WKR
Joined
Oct 20, 2023
Messages
1,268
Location
Wy
Sorry to drag this off topic, but is there any scuttlebutt on a Maven rangefinder bino for 2025?
 
Top