UM TIKKA Scope Rings

[Castle Rock]

The amazon link works fine here for me, maybe clear your cookies

 

[amassi]

@ amassi Thank you Sir, but UM store only appears to ship conus at this stage ! Will get wifey to play with Amazon, Lord only knows how much she smashes the buy now key.... grin

Where are you? I have a spare set of 30mm lows if Amazon doesn’t work out


Sent from my iPhone using Tapatalk

 

[Castle Rock]

Comes up as $205 AU delivered

 

[ridgeline]

Where are you? I have a spare set of 30mm lows if Amazon doesn’t work out


Sent from my iPhone using Tapatalk

I'm in Australia. Thanks for the offer, will reach out to you if I can't get this sorted...

 

[ridgeline]

Comes up as $205 AU delivered

Damned if we can't get it to work on desk top or Ipad ! will call a computer guru buddy to see if he can get a computer 'tard out of a Amazon jail...

 

[sdupontjr]

My rings arrived, waiting on my tap to clean the old loctite out of the threads.

It looks like in my case the front pin won't work. I could use one the the non-threaded pin and place it in the large hole up front and push it all the way forward. OR just don't use any up front and just use a pin in the rear. Has anyone run into this and just using the recoil pin in the rear rather than both or just front? To me it seems like it wouldn't make a difference whether its just in the front or just in the rear. Both would be nice but oh well.

 

[wind gypsy]

My rings arrived, waiting on my tap to clean the old loctite out of the threads.

It looks like in my case the front pin won't work. I could use one the the non-threaded pin and place it in the large hole up front and push it all the way forward. OR just don't use any up front and just use a pin in the rear. Has anyone run into this and just using the recoil pin in the rear rather than both or just front? To me it seems like it wouldn't make a difference whether its just in the front or just in the rear. Both would be nice but oh well.

I only have a pin in the rear ring as well. Of the 2 threaded pins that come with them, one needs some time with a file/dremel to get cleaned up because it wont thread in far enough to work as it came. I didn't bother and didn't like the idea of the thread less pin in the big slot up front. So it's basically the same as i've been doing sportsmatch rings with just one pin.

 

[sdupontjr]

Thats the issue I had as well. The 2 threaded pins wouldn't go in enough. I could see threads exposed and the rings wouldn't sit flush on action, so i decided to get a tap thinking its loctite residue on the threads not allowing it to go down just a little more. If that doesn't work, then I'll go your route and clean them up some and make it work.

 

[sdupontjr]

The tap worked like a champ. Tapped all the threads and all kinds of gunk came out. Now the pins will thread all the way down until they bottom out. No issues with bolt either. Still couldn't get that front pin to work. Better yet I could but I didnt want it to impede into the action opening. So just used the rear. But I would think at 45 in/lb clamping, no pin should be needed. So having one is extra.

 

[NSI]

The tap worked like a champ. Tapped all the threads and all kinds of gunk came out. Now the pins will thread all the way down until they bottom out. No issues with bolt either. Still couldn't get that front pin to work. Better yet I could but I didnt want it to impede into the action opening. So just used the rear. But I would think at 45 in/lb clamping, no pin should be needed. So having one is extra.

Mind sharing your tap specs? Been meaning to do this.

-J

 

[sdupontjr]

6-48. Bought it online for a few bucks on amazon.

 

[sdupontjr]

Also for those interested in scope clearance on a CTR, this is a trijicon credo 4-16x50, med UM rings, can slide a nickle just under scope.

 

[Unknown Munitions]

If you have been sitting on getting tikka rings heres your chance to pull the trigger. We are offering 20% off all UM products this week including our Tikka Rings. Head over to the link ( https://www.unknownmunitions.com/product-category/rifle-parts/ ) to save some money!

 

[roosiebull]

Nice! I have rings on the way already, but this is a good excuse to get the level

 

[eamyrick]

If you have been sitting on getting tikka rings heres your chance to pull the trigger. We are offering 20% off all UM products this week including our Tikka Rings. Head over to the link ( https://www.unknownmunitions.com/product-category/rifle-parts/ ) to save some money!

Sweet. Thanks.

 

[dreamingWest]

Ordered. Thank you!

 

[Adipose]

Nice! couldn't resist, rings and level just ordered. Thanks!

 

[mxgsfmdpx]

Is it true that the new Sako 90 uses the same dovetail size as the Tikkas? Meaning these rings should work, just without the use of the pins?

Might have to order a 4th set.

 

[Formidilosus]

Is it true that the new Sako 90 uses the same dovetail size as the Tikkas? Meaning these rings should work, just without the use of the pins?

Might have to order a 4th set.

View attachment 626686

Yes. 16.5mm rail.

 

[mxgsfmdpx]

Yes. 16.5mm rail.

Perfect. I’ll be able to drill and incorporate the pins as well with my press. Thanks.