Ultralight Ultralight Rifles

[sebastian.cassell]

It’s the pencil profile barrel with the .625 gas block size in 5.56 1/7 twist. I can get specific measurements if that doesn’t answer it.

 

[packgoatguy]

What's the diameter of that barrel?

I measured my bca barrel at about 12.65mm

 

[CJ19]

i am sure someone asked this question, but are there any recommendations for a ultralight standard bolt action upper that would go in these designs. I know it would add a bit more weight bit i would be willing to sacrifice a few oz for something that is my preference.

 

[HighUintas]

I measured my bca barrel at about 12.65mm

That's incredibly thin for it going all the way back to the tenon part. I would like to know why there's no bolt gun barrel contours as thin

 

[JBradley500]

I ordered a BCA. Thanks.

I need to put my spare parts together and make a backup.

 

[packgoatguy]

i am sure someone asked this question, but are there any recommendations for a ultralight standard bolt action upper that would go in these designs. I know it would add a bit more weight bit i would be willing to sacrifice a few oz for something that is my preference.

The lightest I'm aware of is the Pierce Skeke Ti Rem700 SA. 15.9oz. But it will cost you. Probably close to $2k for the action alone. There are quite a few in the 19-20oz range, including the Kimber 84m and MacBros Element.

 

[PistolPete]

The lightest I'm aware of is the Pierce Skeke Ti Rem700 SA. 15.9oz. But it will cost you. Probably close to $2k for the action alone. There are quite a few in the 19-20oz range, including the Kimber 84m and MacBros Element.

Is the Howa Mini in that 20 oz range as well? I don't know if I've ever seen an exact weight given for it.

 

[packgoatguy]

Is the Howa Mini in that 20 oz range as well? I don't know if I've ever seen an exact weight given for it.

This is a copy/paste from post # 2273:


"23.03oz howa mini action (without bottom metal, but including bolt and trigger, ready to bolt into a chassis)

So, if I recall correctly on action weights for comparison:

21.1 oz kimber 84m (with fluted mountain ascent bolt, and including trigger)
22.72oz MacBros Element (including triggertech & bolt)

28.5oz Factory length 84m mountain ascent barrel in 308win

36.2oz Factory length tikka stainless lite barrel (not fluted) in 308win

Kimber Mountain Ascent 308win BA is 3lbs 1.2oz at factory length, and 2lbs 12.4oz (44.4oz) at 16 inches

Christensen Ridgeline Titanium Action 308win with 22 inch carbon fiber barrel threaded 5/8x24 (no brake) weighs 3lbs 8.5oz

Tikka 223rem tikka Barreled Action: 3lbs 9oz (factory fluted "superlite" barrel cut to 16, threaded 1/2x28 with a 5/8x24 adapter, fluted bolt, and ultralight mtngear bolt knob)

47.3oz MacBros Element with 18 inch fluted 6mmCM barrel and Triggertech Trigger, including bolt.

I think the lightest action I've seen pics of was the kimber 84m that @StupidLightweight had skeletonized. If I remember correctly, it was about 17oz including bolt and trigger."

 

[PistolPete]

Thanks! And here I thought I'd read this entire thread...

 

[StupidLightweight]