Tikka to 6 ARC

[MuleyFever]

Just want to confirm. I need a 223 bolt to convert to 6 ARC?

Any recommendations on who to have do it?

 

[HandgunHTR]

There was a post, I believe in the 6ARC thread, that had a name of smith that was doing the bolt conversions.

That being said, any competent gun smith should be able to open up the bolt head to accommodate the ARC/Grendel/PPC chamberings.

 

[waspocrew]

Yep, start with a 223 bolt face. I’m sure there are plenty of smiths that could do the work for you.

 

[wind gypsy]

Yes, can get a standard bolt face bushed as well but opening up a 223 seems easier.

 

[id_jon]

I've thought about trying one of these out for a 22arc build

Tikka T3 Bolt Body — PRPrecision - tikka bottom metal

Couple Tikka’s single action length with the increase in pre-fit and factory take-off barrels on the market today, aftermarket bolt bodies have been the final missing link to full, switch barrel capability on the Tikka platform. My T3 bolt bodies are CNC machined from 4340 and Nitrided for excellen

www.prprecisionrifles.com

 

[Juan_ID]

I believe starting with 223 bolt is easier. Kinport Peak Rifles will do the bolt work for you, back when I had it done I called 2 or 3 local(ish) smiths plus lri and Kinport was the only one willing to do it. I believe it was $125 or so and quick turn around.

 

[Spoonbill]

There was a post, I believe in the 6ARC thread, that had a name of smith that was doing the bolt conversions.

That being said, any competent gun smith should be able to open up the bolt head to accommodate the ARC/Grendel/PPC chamberings.

Kampfeld will put a bushing in to change a standard bolt face to an arc/grendel/ppc bolt face.

 

[h2so4]

All the AICS bottom options work equally for 6ARC?