Tikka "Rokslide Special", let's see 'em

[NVUplandHunter]

T3x lite 223 with vertical grip and mtn tactical bolt handle.
Trijicon Credo 3-9x40 mil bdc
UM ultra lows
Javelin bipod
Hornady factory 73 gr eldm
Zeroed at 200
1 Antelope, 1 elk,1 deer, couple coyotes, bunch of prairie dogs and a bunch of rocks.
View attachment 800441

How did those 73s work on the elk? Sweet rifle!

 

[sportsmans challenge]

I have a few sets of the hawkins hybrids I'll let go cheap cheap. https://rokslide.com/forums/threads/tikka-rings-and-benelli-rail.393436/

Just now acquiring my rss 223 tikka

 

[jstraf]

Feelin double special now

223, 8 twist, SWFA 3-9, UM lows, arca pic
243, 8 twist, RS1.2, UM lows, arca pic

Both had 4” cut off them and threaded 1/2 28.
The 243 has a Jolene S on it.

You can see the can between 2.5-5x On the RS1.2, it’s still plenty usable above 3.5X.

You can’t see the can at all with the SWFA.

 

[HighUintas]

Feelin double special now

223, 8 twist, SWFA 3-9, UM lows, arca pic
243, 8 twist, RS1.2, UM lows, arca pic

Both had 4” cut off them and threaded 1/2 28.
The 243 has a Jolene S on it.

You can see the can between 2.5-5x On the RS1.2, it’s still plenty usable above 3.5X.

You can’t see the can at all with the SWFA.

Nice. That's nearly a twin to my setup except I've got a 16" 223 and 22" 243, scythe can.

 

[Wprinkle]

Not the typical RS special but kinda. 7.5t Preferred Barrels prefit 22creed garage install. Sportsmatch t084. DIY modified Boyd’s stock. Nikon Monarch that I got on super close out price from Natchez with usable moa reticle.
View attachment 509922

Why did you cut this out? Weight?

 

[eLightfoot]

Yup

 

[Tanner]

Feelin double special now

223, 8 twist, SWFA 3-9, UM lows, arca pic
243, 8 twist, RS1.2, UM lows, arca pic

Both had 4” cut off them and threaded 1/2 28.
The 243 has a Jolene S on it.

You can see the can between 2.5-5x On the RS1.2, it’s still plenty usable above 3.5X.

You can’t see the can at all with the SWFA.

Got many rounds through the Jolene ?

 

[Wprinkle]

Got many rounds through the Jolene ?

following

 

[jstraf]

Got many rounds through the Jolene ?

Zero yet. Hoping to get out soon and shoot these things. Ill report back after

I did end up taking off the barrel thread adapters and just changing the hub mount to a 1/2 28 one. The taper not matching my barrel was shitty looking and I marred em up tightening them.

 

[HighUintas]

Zero yet. Hoping to get out soon and shoot these things. Ill report back after

I did end up taking off the barrel thread adapters and just changing the hub mount to a 1/2 28 one. The taper not matching my barrel was shitty looking and I marred em up tightening them.

Bottom looks good. WTF is going on in that top picture?

 

[tikkashooter88]

Roughtech Ranch in 223
SWFA 3-9
Vertical grip and cheek riser from CTR stock
Hawkins rings on factory rail
OCL Hydrogen S

 

[Tanner]

Zero yet. Hoping to get out soon and shoot these things. Ill report back after

I did end up taking off the barrel thread adapters and just changing the hub mount to a 1/2 28 one. The taper not matching my barrel was shitty looking and I marred em up tightening them.

I’ll likely be doing the same.

 

[rogerdoger]

Just finished my 6.5 prc, UM rings, Trijicon Credo 2.5-15x42, victor cheek riser, limbsaver pad, arca+pic and arca mini rail in epoxied fore end, vertical grip, and custom paint job. Heading out to shoot now that it’s ready to go.