Tikka "Rokslide Special", let's see 'em

Joined
Feb 16, 2021
Messages
1,359
Location
Eastern Oregon
Got the .223 RSS going today. Running some cheap ammo through it to "break in" the barrel before getting to the good stuff. Had the 6.5 CM RSS with me to check velocity on the new chrono.

Side note: after (limited) experience with the Tenebraex vs Aadmount scope caps, I'm leaning towards the Aadmounts.

Second side note: don't leave duct tape on your can, put your new cover on and shoot a bunch of rounds through it...that was a bit of a mess.

77gr AAC SMK - 2718 fps avg, 125 fps spread, 15 shot string
77gr Norma GTM - 2630 fps avg, 80 fps spread, 30 shot string
77gr Norma GTM - 2613 fpg avg, 111 fps spread, 20 shot string (pictured)

image_cropper_8D302A8E-4D66-4996-AC35-40BCAD1EEA2F-36115-000045248CA943B2.jpg

IMG_0649.JPG
 

Dobermann

WKR
Joined
Sep 17, 2016
Messages
1,942
Location
EnZed
Side note: after (limited) experience with the Tenebraex vs Aadmount scope caps, I'm leaning towards the Aadmounts.
Why's that?

I have both, and can't work out which one annoys me more ... the Tenebraex open and close fine, but feel like Tupperware, and one of the mounts broke. The Aadmounts are hard, loud, and one of my occular caps won't shut properly.

I thought I preferred the Aadmounts more, seeing as the Tenebraex felt flimsy, but the Aadmount's noise plus failure has had me swinging back to Tenebraex.

Either way, I can't help but think there has to be a better design waiting to be developed ...
 

Lentuk

FNG
Joined
Jul 17, 2024
Messages
46
None with the CTR stock and bottom metal, two action screws.
Depending on caliber you need the magazines, the .308 CTR mags will work with 6.5 CM, 6 CM .243, and similar, .223 mags have an insert for the smaller round but have the same body.
 

Gasman

Lil-Rokslider
Joined
Nov 26, 2012
Messages
298
Location
Ventura County, CA
the Aadmount's noise plus failure has had me swinging back to Tenebraex.
I have several sets of the Aadmounts, and I'm thinking about switching back to Butler Creeks. The eyepiece Butler Creek caps will eventually break, but at least they're cheap and it's easy to keep a few spares around.
 
Joined
Aug 10, 2015
Messages
2,705
Here's mine. I've got a few range trips with it so far and have shot to 550yd. It's rapidly becoming my favorite gun.

Tikka T3X, 24" barrel, vertical grip, DIY cheekpiece, SWFA 6x, UM Tikka rings and bubble.
 

Attachments

  • PXL_20240529_213536630.jpg
    PXL_20240529_213536630.jpg
    292.6 KB · Views: 65
Joined
Jun 12, 2019
Messages
1,679
Got the .223 RSS going today. Running some cheap ammo through it to "break in" the barrel before getting to the good stuff. Had the 6.5 CM RSS with me to check velocity on the new chrono.

Side note: after (limited) experience with the Tenebraex vs Aadmount scope caps, I'm leaning towards the Aadmounts.

Second side note: don't leave duct tape on your can, put your new cover on and shoot a bunch of rounds through it...that was a bit of a mess.

77gr AAC SMK - 2718 fps avg, 125 fps spread, 15 shot string
77gr Norma GTM - 2630 fps avg, 80 fps spread, 30 shot string
77gr Norma GTM - 2613 fpg avg, 111 fps spread, 20 shot string (pictured)

View attachment 785434

View attachment 785435
What is that thing attached to your seat that holds the rifles upright?
 
Joined
Feb 16, 2021
Messages
1,359
Location
Eastern Oregon
Why's that?

I have both, and can't work out which one annoys me more ... the Tenebraex open and close fine, but feel like Tupperware, and one of the mounts broke. The Aadmounts are hard, loud, and one of my occular caps won't shut properly.

I thought I preferred the Aadmounts more, seeing as the Tenebraex felt flimsy, but the Aadmount's noise plus failure has had me swinging back to Tenebraex.

Either way, I can't help but think there has to be a better design waiting to be developed ...

Mainly the tupperware feel and I like that the aadmounts lay more flat.

What is that thing attached to your seat that holds the rifles upright?


With the small clasps.
 
Top