Tikka Nitriding

[Formidilosus]

What did they do?


Also... does anyone that has a nitrided action see the nitride getting worn on the high-friction components?

I had a Tikka action and bolt cerakoted, and the more I'm running the bolt, the more that the cerakote is starting to wear through. It was done by one of the most reputable guys in the industry, so I know it was done right. I'm just wondering if I should get it nitrided instead.

Nitride doesn’t wear though. It changes that metal.

 

[BBob]

see the nitride getting worn on the high-friction components?

Absolutely. If you use it enough the black will wear away. The hardness properties of the nitride won’t but the surface black eventually will.

 

[Sundodger]

Guys, keep in mind nitriding is a case hardening technique. Generally it only changes the material properties of the parent material a few thou deep depending on the process.

Yes, if you wore away 0.004” from your tikka action raceways that would be impressive and you would probably be mad how your tikka now feels like a savage.

 

[HuntHarder]

Nitride doesn’t wear though. It changes that metal.

I asked a guy here in the valley who has experience in nitriding and he said it absolutely wears. Nitriding really only affects the surface typically, not the core of the metal. It is very wear resistant but he says it does wear. Does this sound right to you?

 

[BBob]

I asked a guy here in the valley who has experience in nitriding and he said it absolutely wears. Nitriding really only affects the surface typically, not the core of the metal. It is very wear resistant but he says it does wear. Does this sound right to you?

Nitride hardening goes several thousands deep so you're likely not going to wear it off. The depth depends on the alloy that is treated and how it is treated. Typically it'll go .002-.004" to mby .008" or more deep. The black is more on the surface and will wear. The black has not much to do with the hardening properties, it's just a cosmetic feature of the process.

You are correct in that it is more of a surface hardening (case hardening) and doesn't affect the core but it is as I stated above. You're not wearing it off anytime soon other than the black surface.

 

[swavescatter]

1/10th of a thou for stainless? That could wear potentially.

How Does Liquid Nitriding Work?

HEF-USA provides wear and corrosion reduction treatments are capable of Nitriding Plain carbon and Alloy Steel Nitriding Stainless Steel, and Nitriding Cast Iron; also Salt Bath Nitriding options, including QPQ; ARCOR; Melonite and Tufftride. Liquid Nitriding, Nitrocarburizing, Ferritic...

www.hefusa.net

 

[TxAg]

I asked a guy here in the valley who has experience in nitriding and he said it absolutely wears. Nitriding really only affects the surface typically, not the core of the metal. It is very wear resistant but he says it does wear. Does this sound right to you?

No, it alters the properties of the metal. You'd have to remove enough of the surface to get below the case depth.

 

[Formidilosus]

I asked a guy here in the valley who has experience in nitriding and he said it absolutely wears. Nitriding really only affects the surface typically, not the core of the metal. It is very wear resistant but he says it does wear. Does this sound right to you?

No, that is not correct. You are not wearing through the metal to that depth in use.

 

[swavescatter]

No, that is not correct. You are not wearing through the metal to that depth in use.

I think there's a whole lot of information you'd need to make a statement that authoritative. Who knows how this shopt nitrided (temp/duration/base material/etc.) Even diamonds cut diamonds...

 

[Formidilosus]

I think there's a whole lot of information you'd need to make a statement that authoritative. Who knows how this shopt nitrided (temp/duration/base material/etc.) Even diamonds cut diamonds...

Ok. Well in almost 30 years of using nitride, Melonite, etc extremely heavily- including multiple pistols with more than 150,000 rounds on them that spent a considerable amount of time in salt water; actions with 20,000 plus rounds on them, etc, etc.; and also seeing a lot of others have the same use on nitrided guns- none of them has the nitride “worn through”.

It absolutely will lose its black color, but Nitriding done by any reputable shop isn’t “wearing through” in use on firearms.

 

[HuntHarder]

Maybe the guy was thinking more industrial vs. Gun finishes. I just read up on nitriding from a few sites and they all say it wears. I guess from a shooting stand point, the average guy or above average guy, would never shoot enough to cause wear to happen.