The perfect .223 Rokslide Special Setup

[Matt5266]

I copied you, it worked good

Glad to hear!

 

[JDMBEND]

LH Tikka T3x stainless 20” factory threaded
Trace Shoot2Hunt scope
Nightforce Med. Rings
Area 419 rail
Rokstok Lite w/integrated arca rail
Dead Air Nomad Ti OTB
(Barrel may get cut to 16-18”)

 

[Deere_Man]

lol.

Original T3 in 222 Rem
Bushnell Elite 3200 3-9x50mm
Burris Xtreme Tactical two piece base
Warne Maxima steel horizontal 1” rings
Factory stock

 

[wind gypsy]

Top one is pretty close.

Stainless t3x
18” ACE tikka lite contour 7.5 twist, 223 wylde
Rokstok
Sportsmatch medium (or high? Not the lower ones) rings
Maven rs1.2
High desert bottom metal
Waters 10 rd mag for range, @pods8 (Rugged Stitching) printed 4 rd mag for hunting
Pictured with tbac ultra 7

If doing over and absolutely optimizing I’d consider 21-22” with a OG6, 0.100” freebore instead of wylde, and 7 twist. I’ll also likely go pic rail and something like NF UL rings going forward instead of direct mount rings.

 

[pods8 (Rugged Stitching)]

@pods8 (Rugged Stitching) printed 4 rs mag for hunting

In 223 if you're cool with 3rds for hunting don't sleep on the "flush" variant.

 

[JDMBEND]

Curious about barrel length. Why go longer? Never owned a bolt action .223 and have a TX3 on order with a 20” barrel and was thinking it may be too long. Going to run a otb can on it.

 

[Ajsomp]

Curious about barrel length. Why go longer? Never owned a bolt action .223 and have a TX3 on order with a 20” barrel and was thinking it may be too long. Going to run an otb can on it.

More speed = more terminal range

 

[Ajsomp]

In 223 if you're cool with 3rds for hunting don't sleep on the "flush" variant.View attachment 1043886

Highly recommend these. I have the 223 and M+ mags. I plan to order more across the board for both my guns.

 

[WyldGoose]

For me, this is close. It’s by far my favorite rifle to shoot, and not just as a “training rifle”. It’s kinda become a great general purpose all-arounder.
I’ve made the factory stock work for me but it does have its shortcomings and because I love the gun so much it has a wood RS Lite in the works. Eventually it’ll get the OG223 can and this one will move to the 6cm.

Tikka 16” .223
OG65
SWFA 3-9
UM rings, level & knob
Limbsaver

 

[hereinaz]

Curious about barrel length. Why go longer? Never owned a bolt action .223 and have a TX3 on order with a 20” barrel and was thinking it may be too long. Going to run an otb can on it.

Not too long, just depends on what you want and other limitations. Extra velocity is nice over the 16”.

 

[wind gypsy]

Curious about barrel length. Why go longer? Never owned a bolt action .223 and have a TX3 on order with a 20” barrel and was thinking it may be too long. Going to run a otb can on it.

If you look at the picture I posted, the other rifle is an 18” 6 creed with an og65. Way shorter than the 18” 223 with an ultra 7.

18” makes sense if you’re adding 7” of suppressor to it. Shorter is certainly nice for being handy but purely shooting I like the balance and stability of a longer barrel.

Longer also means more velocity and less noise. I don’t like loading ammo to Internet forum pressures. Modest is mo better.

The quickload/GRT dweebs will probably tell you it’s easier to get a complete powder burn too but that’s not something I worry about.

 

[Ajsomp]

If you look at the picture I posted, the other rifle is an 18” 6 creed with an og65. Way shorter than the 18” 223 with an ultra 7.

18” makes sense if you’re adding 7” of suppressor to it. Shorter is certainly nice for being handy but purely shooting I like the balance and stability of a longer barrel.

Longer also means more velocity and less noise. I don’t like loading ammo to Internet forum pressures. Modest is mo better.

The quickload/GRT dweebs will probably tell you it’s easier to get a complete powder burn too but that’s not something I worry about.

It’s crazy to think just a few year ago I was shooting a 20” gun with an 8 inch suppressor and was okay with it. Now any gun with a barrel over 18” regardless of the suppressor length feels too long. Around 22-23” length with a suppressor feels about right.

 

[JDMBEND]

Ha Ha! I had a 24” barrel with a 7.5” can. Felt like I was carrying a Pole Vault in the woods. That’s why I was questioning if I should chop my 20”.223 barrel. I think with a OTB can it will be ok. We will see.

 

[hereinaz]

Ha Ha! I had a 24” barrel with a 7.5” can. Felt like I was carrying a Pole Vault in the woods. That’s why I was questioning if I should chop my 20”.223 barrel. I think with a OTB can it will be ok. We will see.

26” barrel plus Ultra 7, made it long…