The 22 creedmoor thread

[Mountain_Life]

I’m interested in a follow up on this barrels performance. I’m currently trying to decide which route to go for my next build. A PBB 16” 1:8 twist is one I’m considering. This velocity seems really slow, even for a 16”. My current gun is has a 18” barrel and I shot a box of this ammo through it when it was new and was getting about 3100fps.

I expect to see the velocity increase once I get some more rounds through the barrel and also once I start shooting fired brass. Also, I could definitely push a bit harder with the powder but I'd rather not as it will see a wide range of temperatures and a lot of snow/wet conditions.

 

[B_Reynolds_AK]

I have 2 WolfHunters, one on a Tikka 22 Creed and one on Tikka .223….phenomenal can.

@kswaterfowl
You both weren't lying. I just shot my Wolfhunter back to back with the Scythe on the new 223. The Scythe is great. Hearing safe. But, the Wolfhunter is quieter still. Very happy with both of them.

 

[willfrye027]

Got my new barrel from @Unknown Munitions up and running. It’s a 24” ace tikka prefit, tikka lite contour, throated for 88s. Solid turn around time as well from UM, fit and finish look good, bore scoped and everything looked nice and clean on the chamber job and the barrel itself

Barrel shoots well. Initially tried RL26 which produced some blazing speeds but sustained accuracy was not there.

Seems to shoot both 80eld and 88eld well. Two larger groups with the 80s were tiny but with a flier of uncertain cause (maybe me maybe not)…ballistically they are equal the 80gr at 3300 and 88 at 3150fps approx,

Final load is going to be 88eld in alpha LRP with fed 215s, 40.5gr n555 at 3175ish FPS (need to verify velocity tomorrow).

 

[B_Reynolds_AK]

@willfrye027
Did you measure your throat with a comparator?
What OAL are you loading the 88’s at?

My upcoming 18” build from them is the same barrel and will be throated for 88’s as well, so curious how that turned out.

 

[david2duck]

My dad’s tikka in 22-250 that we had chambered to 22cm hated the 88’s. I’m talking 3”-5” groups. Shot the 80 eldm about 2”, and the 80 eldx slightly better. Tried h4350 and 6.5 Staball.

Loaded 5 with 77 tmk’s and 6.5 Staball just shy of 1/2”. Going to load 15-20 more and retest and then off to the races if it holds up.

 

[STXB245]

My dad’s tikka in 22-250 that we had chambered to 22cm hated the 88’s. I’m talking 3”-5” groups. Shot the 80 eldm about 2”, and the 80 eldx slightly better. Tried h4350 and 6.5 Staball.

Loaded 5 with 77 tmk’s and 6.5 Staball just shy of 1/2”. Going to load 15-20 more and retest and then off to the races if it holds up.

I also have a rechambered Tikka. My primary load is the 80gr ELDM. They shoot really well. I’ve tried H4350, AA4350 and Staball 6.5. Did well with all 3.

I tried a box of the factory Hornady 80 ELD-X and the gun absolutely hated them.

Have not tried 88s yet. I have some sitting on the bench waiting to be worked up.

 

[Formidilosus]

My dad’s tikka in 22-250 that we had chambered to 22cm hated the 88’s. I’m talking 3”-5” groups. Shot the 80 eldm about 2”, and the 80 eldx slightly better. Tried h4350 and 6.5 Staball.

Loaded 5 with 77 tmk’s and 6.5 Staball just shy of 1/2”. Going to load 15-20 more and retest and then off to the races if it holds up.

The one I am shooting now is the same, except it won’t shoot the 80gr X or M. 77gr TMK’s are good.

 

[gotlag1789]

sub’ed

 

[Tanner]

The one I am shooting now is the same, except it won’t shoot the 80gr X or M. 77gr TMK’s are good.

No dice with the 88s? Seems like it’s been mixed reviews on 1-8 22-250 Tikkas with them.,.. I’ll be a little sad if they don’t shoot in mine

 

[Formidilosus]

No dice with the 88s? Seems like it’s been mixed reviews on 1-8 22-250 Tikkas with them.,.. I’ll be a little sad if they don’t shoot in mine

I’ve seen a bunch that shoot them well. Haven’t tried them in mine.