The 22 creedmoor thread

[Castle Rock]

apologies if the question has already been answered, but…


I’ve created quite the pile of “once-fired” 6cm brass. Is this brass easily resized to 22cm?

 

[Castle Rock]

And before someone pipes up and says you need to anneal, you don’t

 

[Lawnboi]

apologies if the question has already been answered, but…


I’ve created quite the pile of “once-fired” 6cm brass. Is this brass easily resized to 22cm?

It can easily be necked down.

That said sometimes brass fired in different chambers has issues in another. Worth a shot.

 

[justin davis]

Anyone shoot the Hornady 62 eldvt in their 22 creedmoor?

 

[Joshua323]

22CM shooting 75gr ELDMs going 3500 gets it done...


250yds
View attachment 570047

30yds
View attachment 570048

375yds
View attachment 570049

100yds
View attachment 570051

450yds
View attachment 570052

230yds
View attachment 570055

312yds
View attachment 570057

375yds
View attachment 570058

View attachment 629856

Hey man, how is the wound channel with the 88s? Do you get an exit? And if so, is it of any size or mostly just a pin hole in and out?

 

[VirginiaBeach]

Anyone shoot the Hornady 62 eldvt in their 22 creedmoor?

Shot them today in my 22” 22 Creed
Virgin alpha brass
RL26
47.0 gr 3597 fps avg
47.5 gr 3661 fps avg
48.0 gr 3740 fps avg

The 47.0 gr load shot the best for me.

Reload at your own risk, these were fine in my chamber but may not be in yours. I have a .219 bore 4 groove barrel.

 

[ID_Matt]

More short barrel data. First rounds through the gun using N560 loading to just under max according to Vihtavuori website. Wind was terrible this day which definitely didn’t help group size. Going to shoot this load for a bit and let the barrel break in. Ran up to 3,000 and didn’t notice any pressure signs.

Tikka action with a rechambered 22-250 barrel to 22 creed cut to 18”

88 ELDM
Alpha LRP
Fed 210
42.0 N560
2950 FPS

 

[Robinhood21]

Hey man, how is the wound channel with the 88s? Do you get an exit? And if so, is it of any size or mostly just a pin hole in and out?

All those animals were shot with a 75ELDM. I just started loading some 88s but haven't shot anything with them yet. I plan on running the 88s this year to see how they do.

 

[justin davis]

Shot them today in my 22” 22 Creed
Virgin alpha brass
RL26
47.0 gr 3597 fps avg
47.5 gr 3661 fps avg
48.0 gr 3740 fps avg

The 47.0 gr load shot the best for me.

Reload at your own risk, these were fine in my chamber but may not be in yours. I have a .219 bore 4 groove barrel.

Cool thanks for the info

 

[ChrisAU]

Decided to dive into 22 creed this week. Got a 16.5" 1:8 blank, Pure Precision SKLTN, and a Manners Pro Hunter on the way. Got a case of Hornady ELD-M last night, I think this may be the cartridge that finally gets me into reloading though! Excited to put it together.

 

[waspocrew]

I usually shoot heavies with my 22 CM, but decided to try the 62 gr ELD-VT this time around and they did not disappoint. All groups were 5 shots at 100 yards, shot in mid to high 80s with maybe 30 seconds between shots. ES was a little high on all except 39.0 gr. No pressure signs, but obviously work up in your rifle. For reference, white squares are 1”.

Alpha 2x fired SRP brass
CCI 450s
Varget 37.5 - 40 grains
CBTO: 2.097" (0.020" off lands)

Rifle has 22" 1.7.5 twist Bartlein

37.5 gr
Avg: 3498.6
ES: 122 (Had one shot that dopped velocity big time)



38.0 gr
Avg: 3563.1
ES: 40.3


38.5 gr
Avg: 3606.7
ES: 49.7



** 39.0 gr **
Avg: 3654.8
ES: 8.3




39.5 gr
Avg: 3679.6
ES: 40




40.0 gr
Avg: 3728.6
ES: 37.8

 

[CMCctx]

I shouldn't have read through this thread. I've been waffling between converting my old 243 to 22 Creedmoor, but always decided that I didn't want to add another caliber to feed. Then I realized my .243 is my only .243 so it really was a 1:1 trade. Then I also realized I have a suppressor that's currently homeless that would be perfect for this.

This is going to cost me some money.

 

[JRS3]

This is going to cost me some money.

Yeah, this site is notorious….

Vandal X just arrived.

 

[JRS3]

 

[Gstew1930]

View attachment 737307

My buddy just bought the same rifle, its a shooter

 

[Duh]

View attachment 737307

Those flutes are sweet!

 

[huntnful]

80 ELDM at 600 yards.
25” muller works #5 1-8 twist
41.5gr H4350
3280fps
CCI 200

 

[waspocrew]

80 ELDM at 600 yards.
25” muller works #5 1-8 twist
41.5gr H4350
3280fps
CCI 200

View attachment 737339

I mean that’s good shooting and all, but I honestly expected better from you! Haha

Killing it as always!

 

[huntnful]

I mean that’s good shooting and all, but I honestly expected better from you! Haha

Killing it as always!

Hahaha I tell people all the time, my gunsmith makes it easy on me. And I build a little weight into the rifles because I do like a little added precision, albeit not necessary to kill things. This gun is 9lbs and that is the first load I put together for it.

 

[Sadler]

80 ELDM at 600 yards.
25” muller works #5 1-8 twist
41.5gr H4350
3280fps
CCI 200

View attachment 737339

Time to go kill an elk with it!