Suppressor make/model input wanted

[Schmo]

This may have been covered here, if so, you can point me to it. I should soon have cash in hand for a suppressor. My thought was to get a DD Enticer S-Ti. Seems they are out of stock pretty much everywhere. I can wait until more come, but I wanted to ask if there is another can I should consider that is in the same weight and price range? This will be my first suppressor. It’s primarily going on an 18” 6 PRC Tikka build for western hunting.

 

[Brix8984]

If your not going to use it on anything bigger than 6mm I’d look at the dd wolf hunter.

 

[Brucebarker024]

I really like my diligent defense LTI. I think it’s a great can. Another one you could look at is the otter creek labs hydrogen series.

 

[06 SB]

A lot of the good ones are sold out right now. At the DSC show here in ATL, I stopped by the Silencer Shop booth to ask specifically about the OCL Hydrogen K 6.5 which has been “Out of Stock” for quite some time. I ordered one there. You can call them directly and get on a wait list for a specific suppressor.

I have an DD Enticer STi and a Resilient Jolene S and both are pretty comparable. The Jolene S is worth a look too if you can find one. The DD Wolfhunter would probably be a good one but all DD suppressors are 20 weeks from ordering to fulfilling.

 

[Schmo]

I was also going to ask about the OCL Hydrogen K. Either 6.5 or 30 cal

 

[Brix8984]

I have a hydrogen s 6.5. I wouldn’t go with the k personally.

 

[WKR]

If you can spend the extra money, the new Dead air Nomad ti-xc is worth a look. I've been shooting it a lot lately and it's becoming one of my go-to cans. I prefer it over the Scythes and STI. When I reach for a lightweight can it's either the nomad xc or the enticer Lti.

Plus they are a little easier to get

 

[DWro17]

Scythe ti is pretty impressive for size and weight and there’s some places with them in stock over here in Tulsa if you can’t find one over there.

 

[TxLite]

If you can spend the extra money, the new Dead air Nomad ti-xc is worth a look. I've been shooting it a lot lately and it's becoming one of my go-to cans. I prefer it over the Scythes and STI. When I reach for a lightweight can it's either the nomad xc or the enticer Lti.

Plus they are a little easier to get

What makes the nomad your preferred can over the scythe? No experience with the nomad ti but I do like the standard nomad

 

[wesfromky]

I have a number of OCL hydrogens, and they have been great so far. If you can find one of the 6.5 S, I think that is the way to go.

 

[SloppyJ]

If it's for a 6mm, the wolfhunter would be great. It's probably my favorite can at the moment and I have 7.

If you want a 30cal, you're on the right track for the DD STi or LTi. They make great cans. The scythe is a pretty good one. I'm interested in the ti-xc but havent shot it. Not sure it offers much benefit over what I have.

Otter Creek is another company that makes great stuff and I wouldn't hesitate to get something of theirs.

It's worth it to wait for what you want. You're basically stuck with it for life.

 

[WKR]

What makes the nomad your preferred can over the scythe? No experience with the nomad ti but I do like the standard nomad

Tone and sound suppression is better. It's 3d printed so the baffle geometry is improved over a traditional welded can.

 

[Schmo]

I have a hydrogen s 6.5. I wouldn’t go with the k personally.

Would you mind explaining why? Thanks!

 

[Brix8984]

Would you mind explaining why? Thanks!

There is just not enough volume on that size of can to suppress your 6 prc well enough imo.

 

[Schmo]

Gotcha. Are you saying don’t go with the Hydrogen series at all, or just not the K?

 

[TxLite]

Tone and sound suppression is better. It's 3d printed so the baffle geometry is improved over a traditional welded can.

So it’s not just marketing hype about the 3d printed baffles?

 

[ResearchinStuff]

Hyperion and hyperion K are always worth a look. Excellent suppression.

 

[Brix8984]

Gotcha. Are you saying don’t go with the Hydrogen series at all, or just not the K?

Just not the K. I like my hydrogen a lot. Also have 2 dd cans 2 Jolene’s a scythe and a nomad ti xc in jail. For the money the dd cans are hard to beat. If you look around enough i bet you can find one in stock.

A lot of people really like the Ab raptor 8 and. 10 as well. I’d throw that in there too but your getting into nomad xc prices there.

 

[Schmo]

Thanks! The Wolfhunter is not rated for an 18” PRC, so I’m gonna skip that one for sure.

 

[Brix8984]

Thanks! The Wolfhunter is not rated for an 18” PRC, so I’m gonna skip that one for sure.

Have you checked with dd? If it won’t handle it I would be a bit worried about the sti as well.