Spotting your shot, most import factors.

but blinking AFTER recoil impulse wouldn’t fall under the category of anticipation to me. Involuntary- definitely. Most blinking is - and of course is a reaction meant to protect one’s eyes.

Blinking is also a tell of mental loading - it's used as an indicator of deception in interrogation for that very reason. Blinking after a shot may simply be indicating a slower, more controlled discharge of that anticipatory energy.
 
I think the firing pin is loud enough that I blink when it goes off even dry firing and knowing it’s empty. But if I keep going I can over come the blink in that context.
 

Blinking is also a tell of mental loading - it's used as an indicator of deception in interrogation for that very reason. Blinking after a shot may simply be indicating a slower, more controlled discharge of that anticipatory energy.
Maybe - it could be for sure. But maybe also an indication of a normal human reaction to an explosion occurring nearby…
 
I want a solid cheekweld during recoil with friction not hard pressure. A cheek pad of some type helps with that.
Stock design matters far more than I would ever have imagined.

Here's a British sporter on a .22 PCP air rifle I've owned for 20+ years. It has a 14-1/2" LOP and about 2-1/8" trigger reach. The comb, while negative, forces me to cock my head upward a few degrees to get in the scope (which is really uncomfortable for any extended period of time), and the trigger is a bit of a stretch:PXL_20251206_190944468.jpg

It's ambidextrous, so no cheek swell -- and reliably results in a ~10° left cant if I shoulder it with my eyes closed:PXL_20251210_222642511.jpg

Here's the Pendleton LRH I chose for my T3x build. 14" LOP and roughly 1-3/4" trigger reach:
PXL_20251206_191307538.jpg

I really like the fact that Wayne's stocks are handed (not ambidextrous) and include a cheek swell that results (for me) in an NPoA that doesn't cant the rifle:
PXL_20251210_222726570.jpg
 
Maybe - it could be for sure. But maybe also an indication of a normal human reaction to an explosion occurring nearby…

Still...sensory loading, like I mentioned a couple of posts up.

There are another couple of ways to chill this mind-body reaction out.

One, which can be difficult to make happen, is full-auto training, especially with a shoulder-mounted belt-fed. Not joking. You might blink with the first round or two, but there will be little to zero anticipation after a few hundred rounds of 5-7 round bursts...because all of that energy is just dumped out of you, and you're only focusing on the here and now, staying exactly in the moment and focused on the targets.

Another way is a recoil-management drill you can do with a handgun. It works especially well with a red-dot sight. Just load up a full mag or five (the higher the capacity the better), and stay focused on the exact spot on the target you want to burn a ragged hole into. Fire all 15-20 rounds as rapidly as you can keep that sight bouncing on the target, keeping absolutely locked-on visually to that tiny spot on the target. As with the full-auto, the first couple of rounds might have a blink, but then you're staying in the moment and not blinking in the slightest.

It really is about mental loading, and finding ways to keep it from accumulating, and discharging it as you can without it influencing the gun and shot.
 
It’s great from benchrest. And that’s where it originated, and PRS has continued it- as PRS is as much barricaded BR as it is anything else.





The reason to actually grip a rifle is “control”. Free recoil means zero control of a gun- that’s doesn’t work in field shooting on live things and/or dynamic shooting. It’s not a death grip- it’s controlled neutral grip.





The goal is to keep the rifle and your body- head eyes, hands, shoulder; as one unit for the entire shot process. Yes real cheekweld does help with recoil/sight movement, but it also keep the whole shooting platform stable and together.
I agree with the criticism of PRS as barricade benchrest. There are many things that do not translate. It doesn’t mean there’s nothing of use from it…

Unlike PRS where the gun’s weight allows for virtually no input, for hunters with lighter rifles, control of the rifle is required.

We have to use our bodies to control the rifle because our rifles doesn’t weigh 20 pounds. It’s about man and machine becoming one…

All of the input from our body to the rifle requires measured and increasing control (in the right directions in anticipation of recoil) until we go too far induce torque, wobble, etc.

The trigger hand traps the rifle to the shoulder, holding firmly.

The cheek/jaw has pressure to connect the face to the rifle in a positive manner to keep eye centered. I do not think the friction to keep the rifle from moving is the main reason. I think it is just enough contact/friction to be a repeatable index/anchor point, without disrupting the rifle or creating tension in the man/machine system.

Done in a balanced way, the rifle can be put in the shoulder pocket or medially, IMO. For shooting that includes a lot of offhand, the shoulder pocket is best and the rifle stock longer. For lots of tripod/bipod shooting medial with a shorter stock works.

I think the argument is much more about hunting/shooting style and technique than right/wrong.

Personally, I want to be able to do both competently. I need to work on the style Form a lot. And, get a stock set up for that style.
 
Maybe - it could be for sure. But maybe also an indication of a normal human reaction to an explosion occurring nearby…

You are the one asking for input/help. If you cannot fire a gun demand without blinking (while wearing ear protection)- you ARE anticipating.
 
Still...sensory loading, like I mentioned a couple of posts up.

There are another couple of ways to chill this mind-body reaction out.

One, which can be difficult to make happen, is full-auto training, especially with a shoulder-mounted belt-fed. Not joking. You might blink with the first round or two, but there will be little to zero anticipation after a few hundred rounds of 5-7 round bursts...because all of that energy is just dumped out of you, and you're only focusing on the here and now, staying exactly in the moment and focused on the targets.

Another way is a recoil-management drill you can do with a handgun. It works especially well with a red-dot sight. Just load up a full mag or five (the higher the capacity the better), and stay focused on the exact spot on the target you want to burn a ragged hole into. Fire all 15-20 rounds as rapidly as you can keep that sight bouncing on the target, keeping absolutely locked-on visually to that tiny spot on the target. As with the full-auto, the first couple of rounds might have a blink, but then you're staying in the moment and not blinking in the slightest.

It really is about mental loading, and finding ways to keep it from accumulating, and discharging it as you can without it influencing the gun and shot.
Thanks - this is the best suggestion I have heard so far I think. The full auto makes a ton of sense. I could do the pistol version. though I wonder if it would translate over to the different context of the bolt gun?
 
You are the one asking for input/help. If you cannot fire a gun demand without blinking (while wearing ear protection)- you ARE anticipating.
Yes I am! But we disagree on the issue I guess, so it’s slightly frustrating since I think the solution needs to be different. To my mind it’s the surprise nature that is actually the issue to some extent. The way the full auto idea would work to remove the blinking as I see it is because after enough it’s not a surprise anymore and my brain knows my eyes are fine. I don’t really wanna burn up this barrel but I wonder what firing the bolt gun as fast as I could repeatedly would do. I do have a 22LR bolt gun incoming so maybe that will also be a good training tool for it.
 
You are the one asking for input/help. If you cannot fire a gun demand without blinking (while wearing ear protection)- you ARE anticipating.
Also I am really not trying to be snarky— blinking really is a normal human reaction to loud noises and things moving towards our face right?
 
Thanks - this is the best suggestion I have heard so far I think. The full auto makes a ton of sense. I could do the pistol version. though I wonder if it would translate over to the different context of the bolt gun?

You're welcome, hope it helps. The only difference really, is that the bolt gun just gives you more time to mentally load up.

Something I've been working pretty hard on lately with pistol, is giving myself zero time to fine-tune the shot, and just press the trigger the absolute instant I perceive the dot crossing onto the target. The more I do this, the more I'm discovering just how much bull$h*t and wasted time and ammo I've spent on single, precise, slow, well-aimed shots over the decades. All it does is create mental loading. You're on target or not, and your mind can recognize that far faster than you can say so.

I did this, at 5 yards, 10 shots, two per spot, in about 17ish seconds a month or two back. It's a modified Dalton Drill, for 2 shots per spot. The original drill is 1 shot on each spot on a 6 of diamonds/hearts, etc, because it was set up originally for revolvers. The thing is, I saw the 6-shot drill done about 30 years ago in less than 3 seconds by an instructor with irons, with no misses, from low-ready. So, much less than a second per spot. He was shooting a .45 1911, so the larger bore has a bit of an advantage over 9mm in this photo, but it was less than a half second per shot. It was f'ing mind-altering to see done. I've shaved about 3-5 seconds off my time with just going fast and getting almost this accuracy below, just not giving any time to mental loading, but there's a long way to go still. The majority of the targets don't look this good.

Overall though, I think that's what the difference is, and why I haven't cracked 15 seconds on this drill before in the last 30 years - mental loading. Just shoot. Don't think, just press when on target and go. The faster you can train your brain to recognize dot/target intersection and just send it, the more accurate you'll be.

Counterintuitive, but true to the best of my knowledge.






image0 - Copy.jpeg
 
Back
Top