Seekins PH3

[big217boy]

Love my seekins PH3 in 308 shoots great groups. I live in Colorado and kind of wish I would have got a larger caliber like 7mm PRC or 300 win mag.

If desired, you could always have a 300wsm barrel made for it…switch the bolt face…and now you have your mag.


Sent from my iPhone using Tapatalk

 

[AndrewMT34]

I thought this is the emergency vent/pressure hole in the event a case ruptures.

I went and looked at a few of my rifles and noticed they all have a small hole on the side of the action… I learned something new today.

The seekins just caught my eye because I could see the lugs turning in it when opening/closing the bolt.

 

[nm.otter]

I thought this is the emergency vent/pressure hole in the event a case ruptures.

Right -- and if you expect real risks of water intrusion, a dab of silicone should be safe.

 

[Ophidian]

Does the ph3 come with the Hunter brake or are they shipping without?

E: it does. Got to visit the one I just bought to do paperwork.

 

[duckcarver]

Disclaimer: this is not a bash on Seekins.

You draw your own conclusions on this information. My PH3 in 6.5 PRC was not the expected accuracy based on Seekins reputation. Ragged crown so bad that the patches would tear on the edges. It was a bit challenging to get a response from customer service but once the return was initiated the process was smooth sailing.

Seekins lows .....

View attachment 882859

Which NF scope is this? Planning to use NX8 4-32x50. Was expecting to need at least mediums.

 

[Gulogulo]

Which NF scope is this? Planning to use NX8 4-32x50. Was expecting to need at least mediums.

NX8 4-32x50

The only downside to using lows is you have little room to adjust for eye relief but luckily the position was perfect. I have the comb in the first up position.

 

[Ophidian]

I have Warne mountain tech lows and I can’t mount my nx8 2.5-20 on it so time to grab some taller ones. At least I can use the lows on my other rifle.

 

[ELKhunter49]

That's an interesting thought. So I wouldn't have to get a new magazine the WSM would fit in the mag?

If desired, you could always have a 300wsm barrel made for it…switch the bolt face…and now you have your mag.


Sent from my iPhone using Tapatalk

 

[Timjohnson11]

Seekins sells prefits and bolt heads for the ph3. Mine is chambered in 6 Creed and I have a Seekins 20” prefit in 22 ARC on order (along with the ARC bolt gear and MDT magazine Seekins customer service recommended.

Prefit was $500 I believe and another $100 or so for the bolt head.

(all available to order in Euro ).

That's an interesting thought. So I wouldn't have to get a new magazine the WSM would fit in the mag?

 

[hunt1up]

I was impatiently waiting on a long ago ordered Element Hunter in 6cm. I’d been routinely checking online for a PH3 if one popped up. Last week Midway showed one in stock so I cancelled my Hunter and bought the PH3. Put $1200 back in the bank and got the gun in a few days. I can always buy the Hunter chassis when they start selling them.

I got it all set up last night and plan on shooting this weekend. First impression is that it’s really well thought out. The bolt functions smoothly and I really like the throw and handle. It’s quick and intuitive. With the mag in, the bolt slides across the carbon of the magazine and you feel it. It doesn’t impede its function, but it adds a slight grittiness to the motion. I’d imagine that’ll smooth out with use and it’s not a deal breaker. I like the MLOK rail. It’ll see both tripod and bipod use, and in 2 minutes I had both attachments mounted where I wanted them.

All done with a Trijicon 2.5-15 and Seekins lows, it weighs 9lbs 6.3oz. Not the lightweight version I was going for with the Hunter but it’s fine. My other rifles are in this weight range. With the 20” barrel and the weight of the adjustable stock it balances really well and doesn’t feel heavy in the hand. I’m sure I’ll get curious and get the chassis later, which will make it a steel barreled version of the Hunter.

Edit: It also didn't come with a thread protector. I thought that was lame. I'm not hunting with a brake on a 6 creedmoor. I just ordered a $10 thread protector rather than calling Seekins about it.