Scope Zero Check Thread

Zero check. Been bouncing around on rough roads since February.

Tikka 6.5 cm in modified factory stock
Swfa 3x9 in sportsmatch rings.
Scythe ti (the weakest link)
147 eldm handloads

Rifle is zeroed for a nonlead rd. 147 intended zero is .2 mils low. So this is still dead on. Have the difference built into my ballistics app.

The tikka swfa thing has been a game changer. No longer running around with my head cutoff due to vortex and Leupold.
 

Attachments

  • Screenshot_20250919_090454.jpg
    Screenshot_20250919_090454.jpg
    128.9 KB · Views: 21
Initial Zero. Rifle was recently cut down to 20” and threaded, only had minimal ammo left and I didn’t want to load more until I got a zero and got to make sure it still shot well.

Black target was initial zero the other evening. 5 rounds. KRG target was 2 additional 5 round groups. Zero is set so will check it later this season. If I end up hunting with this rifle.. the 7 PRC may get carried.

Tikka T3x in KRG Echo
maven RS1.2 in UM rings
Dead Air Nomad TIXC
143 ELDx over H4350 for a 10 shot average of 2550 fps.
 

Attachments

  • IMG_1014.jpeg
    IMG_1014.jpeg
    479.7 KB · Views: 34
  • IMG_1043.jpeg
    IMG_1043.jpeg
    418.1 KB · Views: 34
  • IMG_1015.jpeg
    IMG_1015.jpeg
    696.9 KB · Views: 34
Checked again today. Has been on a work trip and shot 129 wild goats since the zero check above. Still good within 0.1MRAD. Used a pretty shit aiming point. This March gets used heavily, not babied. It is reliable. No issues with the Talleys either

View attachment 888056View attachment 888057

Hadn't checked this in a while. 5 rd quick check today. March, Talleys, Remington combination continues to be 100% functional.
 

Attachments

  • Screenshot_20250920_145335.jpg
    Screenshot_20250920_145335.jpg
    113.7 KB · Views: 16
First 10 since the last time shot, new box same lot#. Still zeroed... with in a mil of last 2 10rd groups
IMG_3389.png

Adjusted .1 R, shot 10

IMG_3391.png

Came down .1

IMG_3392.png

Went out to 509 to true up. elevation 3.4, shooter app had 3.2. Shot 5, two are just off to the right marked with yellow paint pen

IMG_3399.jpeg


Looking back at my last two targets 10rd each (1st was -.08 ele and-.03 wind and 2nd was .12 ele and -.40 wind), what I thought was a shift in zero was in hind sight was not a dead on zero. I should have shot a 30rd adj and then confirm.

Lessons relearned (again)- buy and bring the right amount of ammo to do things the right way from the start. Take better notes. Number your groups as you shoot its all to easy to get it mixed up as the day wears on, ecspecially when everthing wants to fight you along the way. Write it down, you're not going to remember.
And now because I rushed it, I am going to have to reconfirm zero again.
 

Attachments

  • IMG_3393.jpeg
    IMG_3393.jpeg
    611.8 KB · Views: 6
  • IMG_3390.png
    IMG_3390.png
    1,018.4 KB · Views: 7
First 10 since the last time shot, new box same lot#. Still zeroed... with in a mil of last 2 10rd groups
View attachment 942780

Adjusted .1 R, shot 10

View attachment 942778

Came down .1

View attachment 942777

Went out to 509 to true up. elevation 3.4, shooter app had 3.2. Shot 5, two are just off to the right marked with yellow paint pen

View attachment 942782


Looking back at my last two targets 10rd each (1st was -.08 ele and-.03 wind and 2nd was .12 ele and -.40 wind), what I thought was a shift in zero was in hind sight was not a dead on zero. I should have shot a 30rd adj and then confirm.

Lessons relearned (again)- buy and bring the right amount of ammo to do things the right way from the start. Take better notes. Number your groups as you shoot its all to easy to get it mixed up as the day wears on, ecspecially when everthing wants to fight you along the way. Write it down, you're not going to remember.
And now because I rushed it, I am going to have to reconfirm zero again.
Maybe I am reading your post wrong. Are you zeroing your turret or trying to remember where your POI zero is up from zero on the turret?
 
Maybe I am reading your post wrong. Are you zeroing your turret or trying to remember where your POI zero is up from zero on the turret?

Not sure I understand exactly what you’re asking. But…

The top bit was adjustments made. As previous zero (my post on the last page) wasn’t zeroed to POA due to lack of group size. I thought it was but I was .1 high and .1 left.

The bottom bit was the previous zero/groups offset from poa. My first 10rd from this weekend was within .1 of the others. So still zeroed. But not to poa.

Hope that answers your question.
 
Rifles been through an airline trip, truck for a while, and side by side… pronghorn hunt coming up so decided to take it straight out to 400 yards.

Tikka 6.5cm 143gr ELDX
Trijicon Credo 2.5-15x42
Talley low rings
5 shots @ 400 yards.
Variable winds 10+mph right to left (still working on wind calls)
 

Attachments

  • IMG_4143.jpeg
    IMG_4143.jpeg
    375.2 KB · Views: 9
Back
Top