Scope Zero Check Thread

Zero check. Been bouncing around on rough roads since February.

Tikka 6.5 cm in modified factory stock
Swfa 3x9 in sportsmatch rings.
Scythe ti (the weakest link)
147 eldm handloads

Rifle is zeroed for a nonlead rd. 147 intended zero is .2 mils low. So this is still dead on. Have the difference built into my ballistics app.

The tikka swfa thing has been a game changer. No longer running around with my head cutoff due to vortex and Leupold.
 

Attachments

  • Screenshot_20250919_090454.jpg
    Screenshot_20250919_090454.jpg
    128.9 KB · Views: 10
Initial Zero. Rifle was recently cut down to 20” and threaded, only had minimal ammo left and I didn’t want to load more until I got a zero and got to make sure it still shot well.

Black target was initial zero the other evening. 5 rounds. KRG target was 2 additional 5 round groups. Zero is set so will check it later this season. If I end up hunting with this rifle.. the 7 PRC may get carried.

Tikka T3x in KRG Echo
maven RS1.2 in UM rings
Dead Air Nomad TIXC
143 ELDx over H4350 for a 10 shot average of 2550 fps.
 

Attachments

  • IMG_1014.jpeg
    IMG_1014.jpeg
    479.7 KB · Views: 14
  • IMG_1043.jpeg
    IMG_1043.jpeg
    418.1 KB · Views: 14
  • IMG_1015.jpeg
    IMG_1015.jpeg
    696.9 KB · Views: 14
Checked again today. Has been on a work trip and shot 129 wild goats since the zero check above. Still good within 0.1MRAD. Used a pretty shit aiming point. This March gets used heavily, not babied. It is reliable. No issues with the Talleys either

View attachment 888056View attachment 888057

Hadn't checked this in a while. 5 rd quick check today. March, Talleys, Remington combination continues to be 100% functional.
 

Attachments

  • Screenshot_20250920_145335.jpg
    Screenshot_20250920_145335.jpg
    113.7 KB · Views: 3
Back
Top