Scope Zero Check Thread

[HuntHarder]

5 shot zero check on my Tikka 6CM after ~5 days backpack hunting. 100yds, 1" dot.

View attachment 842537

Stopped after the first 4, dialed down 0.1 and right 0.1, then fired to check. Followed up with another 5 shot group to confirm new zero but didn't grab a pic of that. My best guess on the shift is I had removed and reinstalled my suppressor a few times over the course of the season.

9.75lb Tikka stainless in factory varmint stock, Bartlein #3 6CM 18", Scythe can, Trij Tenmile 3-18x44 mil, UM Tikka Rings/level, all assembled per proper Form method. Shooting ADG brass, Berger 108EH, CCI200 over 40.0gr of H4350 going 2740fps.

What leads you to believe it was your suppressor? Reason I ask is, I constantly unscrew and switch mine amongst other guns and it returns back to zero. Direct thread on mine.

 

[solarshooter]

What leads you to believe it was your suppressor? Reason I ask is, I constantly unscrew and switch mine amongst other guns and it returns back to zero. Direct thread on mine.

Fair question, I honestly don't know what else it could've been, gun wasn't touched otherwise, load hasn't changed, etc etc. I have noticed slightly inconsistent bare muzzle zero's when I shoot without the can, so I kind of figured it was the same effect going the other way. Then again maybe smaller group sizes are the culprit, though the initial zero group was 10rds. So it's possible this group would have filled in and been on zero had I shot more. Within 0.1 is still close so I haven't worried too much.

 

[Bluumoon]

Tikka 6.5 CM/RS/Maven 1.2/UM rings reinstalled in stock. System had apparent shift at last check, taken apart, retorqued and nail polished.

First photo 10 shot group, suppressor removed, drop tested, suppressor reinstalled and shot 10 more. Maybe a 0.1 mil shift? Or maybe just shooting enough for a group at 20 rounds ?

3rd photo Master Sporter/Maven 1.2/Warne MT/Tikka rail (I think). 10 shot pre drop and another 10 shot post drop. I left the suppressor on this one (don’t love the idea) for the drops.

I’ll attach YouTube links if anyone is especially bored.

May as well do the .308 while it’s out.
Tikka .308, Maven 1.2, KRG Bravo, UM.
Was having magazine feeding issues so rifle was disassembled to fix mag issues (resolved). Suppressor removed for drops.

 

[Justin Crossley]

Today I zeroed the Tikka 223 with my Zeiss LRP 3 that @Formidilosus tested all last year.

View attachment 840683

This was ten quick shots after bore sighting. I shot those ten and adjusted right 1 tenth before putting it away. That's a .5" dot.

View attachment 840684

I also fired a couple ten round groups with the 25 CM with different loads from when it was zeroed last week.

View attachment 840682

Barrel is still not fully broke in/settled in. Once that's complete and velocity is consistent, I'll zero it fully.

View attachment 840687

Stopped and sent 30 more rounds through the 25 CM today on the way home from work. The rifle has ridden in my Decked drawer for about 100 miles and put in and out of the safe.

This was 15 shots at 100 yards. Based on the last two groups, it needs about .1-.2 mil left adjustment.

 

[solarshooter]

Stopped and sent 30 more rounds through the 25 CM today on the way home from work. The rifle has ridden in my Decked drawer for about 100 miles and put in and out of the safe.

This was 15 shots at 100 yards. Based on the last two groups, it needs about .1-.2 mil left adjustment.

View attachment 845436

30 rds!?!?! That is a crazy group for 30rds. BR level. What's the build?

Edit: I'm dumb, I see the 15rds part now. STILL, that is crazy haha.

 

[8nbait]

Bone stock tikka super lite
6.5 creed 24” barrel
SWFA gen 2 3-15 in Talley lows
135 classic hunter going 2815’
400 yard cold bore and follow up shot
3 mph wind from 7:00

 

[Formidilosus]

Tikka 6.5 CM/RS/Maven 1.2/UM rings reinstalled in stock. System had apparent shift at last check, taken apart, retorqued and nail polished.

First photo 10 shot group, suppressor removed, drop tested, suppressor reinstalled and shot 10 more. Maybe a 0.1 mil shift? Or maybe just shooting enough for a group at 20 rounds ? View attachment 844271View attachment 844272

3rd photo Master Sporter/Maven 1.2/Warne MT/Tikka rail (I think). 10 shot pre drop and another 10 shot post drop. I left the suppressor on this one (don’t love the idea) for the drops. View attachment 844274

I’ll attach YouTube links if anyone is especially bored.

May as well do the .308 while it’s out.
Tikka .308, Maven 1.2, KRG Bravo, UM.
Was having magazine feeding issues so rifle was disassembled to fix mag issues (resolved). Suppressor removed for drops.

View attachment 844308View attachment 844309

Master Sporter Life!

Also, I’m sending a pic you might like.

 

[Randy11]

I was able to get a fantastic deal on a couple Steiner Predator 4s this winter. I could not find any information on them being tested durability wise, so did my own quasi test to see if could trust when.

Steiner Predator 4 4-16×50, Leupold backcountry ringmounts, Weatherby Backcountry 6.5 wby RPM.

I dropped it ten times from about shoulder height (waist high on a normal person) on to my mattress. I dropped it on to the drivers side, but it rolled once and landed right on the elevation turret.

I'm guessing a mattress is way softer than what most people are using, but I'm definitely confident in the set up for my hunting style of set and forget with holdovers out to 400.