Scope Zero Check Thread

[Clark33]

GOLD! You drove back!!! hahahaha

The range is 10min from my front door and its foggy and cold so nothing else to do lol

 

[mxgsfmdpx]

@mxgsfmdpx Ok, don't take offense to my sarcasm, but I am not lying about my 5 shot group... or am I?

Next time you need to work on “doing your part”. Haha. Thanks man and appreciate the PMs. Again, I learned something new today appreciate it.

Also, I re-confirmed I’ll never go to a “gun range” again in my life haha. That looks gross.

 

[Clark33]

Next time you need to work on “doing your part”. Haha. Thanks man and appreciate the PMs. Again, I learned something new today appreciate it.

Also, I re-confirmed I’ll never go to a “gun range” again in my life haha. That looks gross.

Thats the 100yd range and it is not my favorite, but I'm a member out there and members get access to the long range, has dozens of steel targets across the hillside from 100yd to 650yds, thats where I spend most of my time. It was too foggy today so the long range was shut down.

 

[mxgsfmdpx]

My apologies @Justin Crossley for clogging up the thread. I’ll stick with PMs for questions I have moving forward.

 

[6.5x284]

Pre season zero confirmation with can. Bipod and rear bag. Will update post season zero confirmation

 

[huntnful]

10 shot zero check with the 22CM that’s topped with a 5-25X50 FFP tenmile

 

[Juan_ID]

Mounted this Maven rs1.2 on the 223 a couple weeks ago and at the time only fired 5 after a few boresight shots (don’t have pics of that target) but based on the small sample size of 5 I figured it was an ok place to leave it for the time being. Nothing crazy, gun has rode in my truck to and from work and finally got out today to shoot again. I typically zero off 10 but since it’s getting harder to shoot more than a hundred yards in my usual locations I figured it was a good time to try out an extended round zero to get some new quality brass (starline) fireformed. Here’s a 35 round zero check, plan to leave this scope on this rifle for the foreseeable future so I’ll be able to track it tho I’ve already proofed this scope.

 

[wind gypsy]

Mounted this Maven rs1.2 on the 223 a couple weeks ago and at the time only fired 5 after a few boresight shots (don’t have pics of that target) but based on the small sample size of 5 I figured it was an ok place to leave it for the time being. Nothing crazy, gun has rode in my truck to and from work and finally got out today to shoot again. I typically zero off 10 but since it’s getting harder to shoot more than a hundred yards in my usual locations I figured it was a good time to try out an extended round zero to get some new quality brass (starline) fireformed. Here’s a 35 round zero check, plan to leave this scope on this rifle for the foreseeable future so I’ll be able to track it tho I’ve already proofed this scope.
View attachment 820110

Dang, is that a factory tube?

 

[Juan_ID]

Dang, is that a factory tube?

Yes

 

[HighUintas]

Mounted this Maven rs1.2 on the 223 a couple weeks ago and at the time only fired 5 after a few boresight shots (don’t have pics of that target) but based on the small sample size of 5 I figured it was an ok place to leave it for the time being. Nothing crazy, gun has rode in my truck to and from work and finally got out today to shoot again. I typically zero off 10 but since it’s getting harder to shoot more than a hundred yards in my usual locations I figured it was a good time to try out an extended round zero to get some new quality brass (starline) fireformed. Here’s a 35 round zero check, plan to leave this scope on this rifle for the foreseeable future so I’ll be able to track it tho I’ve already proofed this scope.
View attachment 820110

What are the details on that gun and load?

 

[morgaj1]

What are the details on that gun and load?

And rings/mount.


Sent from my iPhone using Tapatalk

 

[Macintosh]

Not a long range rig, but checked zero on a new scope after the season today.

Initial zero and post-season zero check:

New Trijicon accupoint 1-6, NF UL rings, weaver base, (all torqued and with thread locker, rings at 20in/lb), Rem 7600 carbine 30-06, factory barnes vortx 168gr TTSX.

10/13/24, temps in the mid 60’s, spitting rain, calm wind
Boresighted, fired one shot. Adjusted off the one shot, and fired a 3-shot group.
View attachment 820785



Adjusted down 6 clicks, fired another 3-round group.

View attachment 820786



Normally I would have fired 10 and done a final adjustment, but this gun is not particularly precise to begin with, it’s downright unpleasant to shoot and given that the 2 small groups, absent the adjustment I made, would have stacked right on top of each other which pointed toward 6+ round consistency, I elected to leave it as-is since its within a click of my intention to be zeroed 1” high. 95% of its use is 75 yards and less, but this allows me to hold center inside any realistic distance where I hunt (sub 200 yards MAX).

Since then, its been on about 300 driving miles, about 30 of which was on seasonal, rough gravel roads. Carried the gun about 20 cumulative miles off-trail. I did take one fall onto my ass as the bark slipped off the trunk of a deadfall I was trying to climb over, where the gun took some significant impact. And exactly one shot fired. Ended up shooting a good for me buck on day 4 and didnt end up rifle hunting thru much of the rest of the season, so thats the extent of use so far.

Zero check today 1/11/25. It was snowing pretty good, about 18f, and light wind.
View attachment 820787

The group today is centered about 1/2” higher, but given this is realistically a 3moa gun, as well as the 3-round initial zero, I think this result is unsurprising, and I cant say it moved. Given what this rifle is, Im happy with how the scope is holding zero in use. I’ll likely check it again similarly next fall and will report back if anything changes. Until then Im calling it solid.