RokStok

[regulator795]

Got my stock in.
Left Hand Tikka tx3 with D18 contour and multicam layer 1 camo.
There are some imperfections in the carbon, as everyone seems to mention, but nothing I wouldn't do on my first hunting trip. I leave for a turkey hunting trip tomorrow, but I can't wait to take this to the range.

 

[swavescatter]

Do you by chance have the weight of the two pads?


Sent from my iPhone using Tapatalk

Sorry I didn't weigh them but the delta is probably nothing-ish. If you're counting ounces I think the Rokstok stock is not the stock you want to rock.

 

[8nbait]

That multicam looks great!

 

[2Stamp]

I needed to switch out the Sportmatch Med rings to a little taller set. Finally got around to rezeroing after installing a set of UM Med rings. The feel of this stock is getting better and better. Really looking forward to the Marshall I ordered. BTW, home paint job, ha and it shows!

 

[lintond]

Sorry I didn't weigh them but the delta is probably nothing-ish. If you're counting ounces I think the Rokstok stock is not the stock you want to rock.

No problem. Trying to squeak out a few ounces for NRL hunter.


Sent from my iPhone using Tapatalk

 

[wind gypsy]

4mm allen

Not the one I have. Peeled the pad off and have this:

 

[Jimbee]

Not the one I have. Peeled the pad off and have this:
View attachment 852867

Looks like concrete screws...?

 

[huntnful]

Not the one I have. Peeled the pad off and have this:
View attachment 852867

Concrete screws and flat washers would have been my next guess after I tried a 4mm Allen TBH

 

[BLJ]

Not the one I have. Peeled the pad off and have this:
View attachment 852867

Tapcons???

 

[bigsky_hunter]

Not the one I have. Peeled the pad off and have this:
View attachment 852867

Strange, was yours a recent order?

 

[wind gypsy]

Strange, was yours a recent order?

I bought it off the classifieds and I think it was one of the earlier adjustable LOP stocks sent out.

 

[HuntHarder]

When these come back in stock, I was going to try a railed one out. Do they offer the CTR bottom inlet yet? I want to use AICS mags to keep it simple amongst my different set ups.

 

[T_Widdy]

When these come back in stock, I was going to try a railed one out. Do they offer the CTR bottom inlet yet? I want to use AICS mags to keep it simple amongst my different set ups.

Looks like another option coming soon

 

[Axlrod]

It shows two stockeys model on the website but looks like they are the same sku do you know if that's correct or which model you selected. Thanks

If you scroll down the Backstop drop-down menu, there is one listed for "Rokstok-Unknown Munitions (sku:carp)".

 

[Grizzle]

If you scroll down the Backstop drop-down menu, there is one listed for "Rokstok-Unknown Munitions (sku:carp)".

Thanks I see that now, looks like same sku as the other stockeys models. Unfortunately they won't ship to Canada. Between the Canadian peso and the BS tariffs that $80 pad would turn into $145 before shipping which is getting pretty crazy for a recoil pad. Going to look at limbsavers thicker pads that I can get up here or just make my own spacer.

 

[Axlrod]

Thanks I see that now, looks like same sku as the other stockeys models. Unfortunately they won't ship to Canada. Between the Canadian peso and the BS tariffs that $80 pad would turn into $145 before shipping which is getting pretty crazy for a recoil pad. Going to look at limbsavers thicker pads that I can get up here or just make my own spacer.

Yea I thought they were a little high at $90, but I need a bit more length, and this seemed like the easiest way.
Kick-eez makes grind to fit spacers in different thicknesses, I have used them a few times. They are $12 on Amazon.

 

[JDBAK]

When these come back in stock, I was going to try a railed one out. Do they offer the CTR bottom inlet yet? I want to use AICS mags to keep it simple amongst my different set ups.

Yes, I have one.

 

[JDBAK]

Yes, I have one.

My understanding is regular steel AICS mags will not work with CTR bottom metal unless you modify the CTR bottom metal.

Polymer AICS pattern 5 rd mags will work though. It’s a very tight fit. I kinda like them though for field use. Those suckers will not fall out, no matter how thick the brush or rough the terrain.
Not that CTR mags are bad, but I’ve had them dislodge multiple times when climbing through alders and such.

 

[waspocrew]

My understanding is regular steel AICS mags will not work with CTR bottom metal unless you modify the CTR bottom metal.

Polymer AICS pattern 5 rd mags will work though. It’s a very tight fit. I kinda like them though for field use. Those suckers will not fall out, no matter how thick the brush or rough the terrain.
Not that CTR mags are bad, but I’ve had them dislodge multiple times when climbing through alders and such.

Correct. If you have a CTR inlet in your stock and want to use AICS mags, you could go with a bottom metal like this. Fits CTR inlet and accepts AICS.

Atlasworxs Bottom Metal / DBM (AICS) – Tikka T3 / T3X CTR (Compact Tactical Rifle) – Atlasworxs

atlasworxs.com

 

[HuntHarder]

Thanks, Yeah, I was thinking that I really like the polymer MDT AICS in my chassis gun, why not use them in my tikka's as well. I know some specific CTR inlets allow for bottom metals that are designed for AICS. Does UM offer a CTR bottom metal inlet?