RokStok

[yeti12]

With the go getter attitude at UM I’m guessing Jake is or will be looking into bringing the complete stock building process in house.

If that's ever the case I'd love if they reached out to quote some molds. Can do whatever NDA they want or don't want. Just sayin @Unknown Munitions

 

[Ryan Avery]

With the go getter attitude at UM I’m guessing Jake is or will be looking into bringing the complete stock building process in house.

No, that would be a HUGE pain in the ass. We are on the downhill side of this IMO. Stockys is sending good-looking stocks, and UM is getting hardware and paint on them if needed and out the door as fast as QC allows. Looking back, our biggest **** up was too many options and the presale.

These came in today, and more will be here tomorrow. Green and black should start showing up next week.

 

[JollyRoger]

On another note, I got my RokStok back from UM to install the LOP kit and it’s solid. Much better for me with the backing plate and an additional spacer.

Best of all, I torqued everything down and went to confirm zero. Still shoots just as terrible as it always has.

 

[longrangelead]

I want one, but am I the only one that thinks Spartan/pic makes no sense? Shouldn’t it be Spartan/arca and pic/arca? I have a spartan bipod and also want to be able to throw it on my arca head tripod. Am I wrong in assuming that’s a common situation?

I'm with ya! I'd like a Spartan flush/arca and I'm happy.

 

[atmat]

I want one, but am I the only one that thinks Spartan/pic makes no sense? Shouldn’t it be Spartan/arca and pic/arca? I have a spartan bipod and also want to be able to throw it on my arca head tripod. Am I wrong in assuming that’s a common situation?

You’re not wrong, and an Arca/Spartan has been requested since day 1.

Supposedly, it’ll be in development for the RS Lite. But as of now no one knows when that ETA is.

I’ve tried pitching SRS and UM to build it now instead of waiting, but it was fruitless unfortunately.

If any fabricators here want to do it, I’ll buy 3.

 

[Ryan Avery]

You’re not wrong, and an Arca/Spartan has been requested since day 1.

Supposedly, it’ll be in development for the RS Lite. But as of now no one knows when that ETA is.

I’ve tried pitching SRS and UM to build it now instead of waiting, but it was fruitless unfortunately.

If any fabricators here want to do it, I’ll buy 3.

A three in one is the best and simplest order option. AND we might see it real soon.

 

[Marbles]

A three in one is the best and simplest order option. AND we might see it real soon.

I feel bad because I pushed for the 3 in 1, but my next stock will be no rail. @Formidilosus did too good a job in the FF podcast and after giving his approach a try I'm sold.

 

[Ryan Avery]

I feel bad because I pushed for the 3 in 1, but my next stock will be no rail. @Formidilosus did too good a job in the FF podcast and after giving his approach a try I'm sold.

I should have pushed harder for the 3 in 1 in the beginning. I gave up to early.

Don't let him kid you. He loves the railed version.

 

[atmat]

I feel bad because I pushed for the 3 in 1, but my next stock will be no rail. @Formidilosus did too good a job in the FF podcast and after giving his approach a try I'm sold.

Which podcast?

 

[Marbles]

Which podcast?

I think these two. For me it works well, and as I'm prone to throwing gear at a problem, decided intentionally not doing so in this case would save me time and money.

 

[atmat]

I think these two. For me it works well, and as I'm prone to throwing gear at a problem, decided intentionally not doing so in this case would save me time and money.

I’ll give them a listen. I went with the railed predominantly because I didn’t want standard swivel studs (and if think at that they came on the non-railed version). I honestly could’ve gone without flush cups, too, but they’re the lesser of two evils.

 

[Marbles]

I’ll give them a listen. I went with the railed predominantly because I didn’t want standard swivel studs (and if think at that they came on the non-railed version). I honestly could’ve gone without flush cups, too, but they’re the lesser of two evils.

Yeah, I remove sling swivels and fill the holes with epoxy. I like flushcups, but only limited rotation and the rear one is in the wrong spot.

 

[wind gypsy]

I want one, but am I the only one that thinks Spartan/pic makes no sense? Shouldn’t it be Spartan/arca and pic/arca? I have a spartan bipod and also want to be able to throw it on my arca head tripod. Am I wrong in assuming that’s a common situation?

I would have gotten Spartan/arca if it were offered but my rrs clamps take pic or arca. The other side is some people like to use heavier pic attached bipods at the range and Spartan for hunts. Bipods like the gunwerks one don’t do arca, only pic.

 

[willfrye027]

Turns out when you’ve got a rokstock, tikka, maven rs 1.2 combo the bullets steer themselves. Oh and full Kuiu plus stone glacier harness and they come running out of the woods to die. Big fanboy here

 

[ChrisAU]

Turns out when you’ve got a rokstock, tikka, maven rs 1.2 combo the bullets steer themselves. Oh and full Kuiu plus stone glacier harness and they come running out of the woods to die. Big fanboy here View attachment 766674

Lets be honest with ourselves. That deer is still alive if not for the spigot.

 

[lintond]

Lets be honest with ourselves. That deer is still alive if not for the spigot.

Let’s be real…He stabbed it with the bayonet!


Sent from my iPhone using Tapatalk

 

[Axlrod]

I would have gotten Spartan/arca if it were offered but my rrs clamps take pic or arca. The other side is some people like to use heavier pic attached bipods at the range and Spartan for hunts. Bipods like the gunwerks one don’t do arca, only pic.

I got Spartan/Pic, that's what I have for bipods + a RRS. But I mostly use a bipod at the range.
My stock was a LE green, when they sent me the options, because of the LE problems, I went paint. I also stated that "if It made my stock get here faster i will take no rail" I rec. my stock a couple weeks ago and it came with the rail. All is good.
The Rokstok was well worth the wait. Although my last Mcmillan was a longer wait. And my very first composite stock was way longer wait. The first composite stock I ever saw, was in an article in Field & Stream 1977. It was ugly raw green hand laid fiberglass I was a kid, wanted one real bad. I got my first a Winchester Winlite w/ factory installed Mcmillan stock, 270 WCF, 6 1/4 Lbs. Gun has 5000+ rounds through it now. It was $396, got it in 1986- so a 9 year wait.

 

[willfrye027]

Lets be honest with ourselves. That deer is still alive if not for the spigot.

Yep he kept staring like WTF does that guy have on his stock?!!

 

[Brix8984]

Just gonna drop this full UM/Rokslide special here.

 

[TxLite]

Just gonna drop this full UM/Rokslide special here. View attachment 766792

Weight?