Reloading the 277 Fury 6.8x51 SIG Hybrid Case

[Nine Banger]

Very cool, nice work, does it shoot acceptably well so far?

I haven't zeroed it yet.

My steel is too marked up to really see what's going on.

Real tight schedule.

I'll follow up when I get the fire formed brass dialed in and the rifle zeroed.

 

[Nine Banger]

Very cool, nice work, does it shoot acceptably well so far?

47gr Lever load is ok. Holding velocity. I am still fire forming resized sig brass.

I shot fast and it's really windy here with the 2 hurricanes passing by. So the target is leaning in and out a little in addition to full value 6-9mph wind.

I came down .4 but need to check windage on another day. Prob need to go left .1.

 

[Jimbee]

Just getting started playing with a 243 load. 42gr H4350/95tmk = 2758fps. Factory Tikka superlite barrel cut to 17"

 

[Nine Banger]

I loaded 5 of my fire formed, fl sized and trimmed cases to see if there was a velocity difference from cases that were just scrunched and necked up on the first firing.

It's about the same but ES has shrunk.

I didn't look at accuracy yet. I just shot a piece of steel at 300 with a 1 mil elevation hold.

 

[Nine Banger]

This is Captain Obvious stuff but may help someone else like me that wasn't sure.

The long action bolt stop and 300 win mag factory mags work with the 300 Fury.

I was hand feeding it single rounds up until today when I got the bolt stop in the mail.

 

[wind gypsy]

View attachment 943503View attachment 943503Just getting started playing with a 243 load. 42gr H4350/95tmk = 2758fps. Factory Tikka superlite barrel cut to 17"

Give 'er some gas Jim!