Peak 44 Bastion Pad Adapter

[2Stamp]

My LOP is about right for me, so I don't really need an adapter. Other than to change the recoil pad I guess (which isn't a bad idea). But here are the measurements on mine.

 

[khuber84]

I'd love to change out the pad, but dont want more LOP. Excellent idea here, I had something simialr in mind when I first got the Bastion.

 

[Dude270]

The short LOP is whst has kept me from trying one of these stocks.

Nice to see you have came up with a solution. Following along here.

 

[Bbrinks]

I'd love to change out the pad, but dont want more LOP. Excellent idea here, I had something simialr in mind when I first got the Bastion.

Yeah, with the adapter shortened about 1/4” from what I have on my rifle (did this for another member), you can really only add a 3/4” thick pad or so to get to the same LOP as the stock setup.

 

[Nicaburns]

Any word on when we may be able to snag one? I’d love to try one for my alpine CT

 

[Bbrinks]

I can start sending them any time now, just not 100% sure they’ll be perfectly flush at the bottom edge since the profile may be slightly different from stock to stock. What I did on the second one I sent out was to add .5mm all around and then it was just sanded to fit flush.

 

[Nicaburns]

I can start sending them any time now, just not 100% sure they’ll be perfectly flush at the bottom edge since the profile may be slightly different from stock to stock. What I did on the second one I sent out was to add .5mm all around and then it was just sanded to fit flush.

I’m game to try… just let me know what you need.

 

[khuber84]

Yeah, with the adapter shortened about 1/4” from what I have on my rifle (did this for another member), you can really only add a 3/4” thick pad or so to get to the same LOP as the stock setup.

So you can keep oem LOP if I use say a 1/2" thick pacameyer 500B pad?

 

[Bbrinks]

So you can keep oem LOP if I use say a 1/2" thick pacameyer 500B pad?

Yeah you should, at least within a couple millimeters. Here’s the stock pad:


Shortened the adapter to have a 3mm thick base at the top and bottom and made a mockup of the pachmayr:

Here’s the difference between the two, the gray is the stock pad and the white is the pachmayr:

 

[Bbrinks]

For the adapter, here’s the info I would need:

1. Current length of pull from the stock pad, and the measurement from the rearmost edge of the carbon fiber stock to the trigger face:



Don’t need to take the pad off obviously, but the best baseline dimension to start from.

2. Recoil pad you plan on using. Grind to fit is really the only option for these unfortunately. I’ve imported a lot of templates to see how they’d work with the peak profile and unfortunately they don’t come close enough to blend them together. Really the only info I’d need is the thickness of the pad and the hole spacing. I used the cervelatti microcell pad for the weight which worked perfectly, and in the meantime I’ve been tweaking the 3-d printed version to improve the recoil reduction and grip (85a TPU with variable infill from the base of the pad to the rear face for those interested):





3. Desired LOP. Just gives me the thickness at the base needed.

Thanks!

 

[CaseyRyback]

Has anyone tried one of these on a Blacktooth yet?

 

[Bbrinks]

Has anyone tried one of these on a Blacktooth yet?

I’ve only sent out 3 so far, nothing fit up so far but one is probably only now arriving. I’m assuming it’s the same recoil pad, but we should be able to check the profile. I can send you an image file that can printed 1:1 and then wrapped on the black tooth stock to see if they match up.

 

[CaseyRyback]

I’ve only sent out 3 so far, nothing fit up so far but one is probably only now arriving. I’m assuming it’s the same recoil pad, but we should be able to check the profile. I can send you an image file that can printed 1:1 and then wrapped on the black tooth stock to see if they match up.

Thank you very much. My rifle won’t be finished and in my hands until June-ish. If it is not the same recoil pad, I’ll definitely take you up on your offer. Thanks again.

 

[Nicaburns]

I just got my adapter today… quality is utterly impeccable!!
I will try to get the swap done asap!

 

[2buffalo]

Just fit mine up. Hardest part is getting the old recoil pad off. Everything else was easy. LOP came out at 13-3/4 as requested. Tikka superlite in Bastion 5.36 lbs bare rifle with this adapter.

 

[Bbrinks]

Just fit mine up. Hardest part is getting the old recoil pad off. Everything else was easy. LOP came out at 13-3/4 as requested. Tikka superlite in Bastion 5.36 lbs bare rifle with this adapter.View attachment 1009705View attachment 1009706

Looks great! Did you end up sanding off the extra .5mm?

 

[2buffalo]

Looks great! Did you end up sanding off the extra .5mm?

I did not. It was so close it didn't really bother me. Thanks again that was a great idea.