Peak 44 Bastion Pad Adapter

[2Stamp]

My LOP is about right for me, so I don't really need an adapter. Other than to change the recoil pad I guess (which isn't a bad idea). But here are the measurements on mine.

 

[khuber84]

I'd love to change out the pad, but dont want more LOP. Excellent idea here, I had something simialr in mind when I first got the Bastion.

 

[Dude270]

The short LOP is whst has kept me from trying one of these stocks.

Nice to see you have came up with a solution. Following along here.

 

[Bbrinks]

I'd love to change out the pad, but dont want more LOP. Excellent idea here, I had something simialr in mind when I first got the Bastion.

Yeah, with the adapter shortened about 1/4” from what I have on my rifle (did this for another member), you can really only add a 3/4” thick pad or so to get to the same LOP as the stock setup.

 

[Nicaburns]

Any word on when we may be able to snag one? I’d love to try one for my alpine CT

 

[Bbrinks]

I can start sending them any time now, just not 100% sure they’ll be perfectly flush at the bottom edge since the profile may be slightly different from stock to stock. What I did on the second one I sent out was to add .5mm all around and then it was just sanded to fit flush.

 

[Nicaburns]

I can start sending them any time now, just not 100% sure they’ll be perfectly flush at the bottom edge since the profile may be slightly different from stock to stock. What I did on the second one I sent out was to add .5mm all around and then it was just sanded to fit flush.

I’m game to try… just let me know what you need.

 

[khuber84]

Yeah, with the adapter shortened about 1/4” from what I have on my rifle (did this for another member), you can really only add a 3/4” thick pad or so to get to the same LOP as the stock setup.

So you can keep oem LOP if I use say a 1/2" thick pacameyer 500B pad?