Outlier( arken ) barrels

[hebertbrian]

did you weight them?


I emailed them about their chassis lop and they replied promptly

I can weigh then tomorrow and reply, definitely not light even with flutes but I expected that. During Oct and Nov I sent 2 inquiries via the form, one on a lead time update and one on a technical question, neither got responded to other than a generic 'our online contact form is broken', email us directly', and then the barrels showed up 3 days later. Hopefully it's fixed on the contact approach and I hit the broken form stretch, currently looks like there is just their email on the site and there is no phone number available, but have seen multiple people say they call you. From the 45 mins or so of forum research I did before buying reports are they shoot fine.

Sent from my SM-F916U using Tapatalk

 

[KY_coop]

I revieved my 6 cm barrel. I got the straight taper and it came with barrel nut. Haven't tried installing it yet as I don't believe it will fit in my stock and I'm planning to have it turned down.

 

[KyleR1985]

I revieved my 6 cm barrel. I got the straight taper and it came with barrel nut. Haven't tried installing it yet as I don't believe it will fit in my stock and I'm planning to have it turned down.

What day did you order?

What action is it going on?

 

[KY_coop]

Solus and the day this thread was started is when I ordered. Recieved barrel Friday

 

[KyleR1985]

Solus and the day this thread was started is when I ordered. Recieved barrel Friday

Thanks I’m dumb didn’t realize you started the thread.

 

[bielenbm]

I revieved my 6 cm barrel. I got the straight taper and it came with barrel nut. Haven't tried installing it yet as I don't believe it will fit in my stock and I'm planning to have it turned down.

any chance you could tell me the length and weight of it?

 

[KY_coop]

any chance you could tell me the length and weight of it?

18" 5lb 3.9 oz
Edit. This is their taperless option, not the MTU or fluted

 

[hebertbrian]

I ordered 2 of their barrels from their previous website configuration options back in Sept when they were 50% off, straight contour (no taper, 'truck axle'), it was their only contour available then. I ordered the Savage/Zermatt threads, these came with a barrel nut but it seems to be a special/custom design nut where the front part of it passes over the widest part of the barrel and stops on an internal shoulder. A standard savage barrel nut or other aftermarket savage nut (I checked both) is not large enough diameter to spin past the widest part of the barrel. I have not screwed these on an action yet to see fit or shoot these yet, but 1) these came with a nut and 2)the nut looks specific/required for this large diameter contour barrel. I'm not sure if the new contours or configs include the nut but assume so. Other than email updates on my orders, I tried contacting support for questions and got no responses other than them emailing to say their website contact form was down. Other research I did before buying seems to be they are not really responsive to questions and maybe only to quality issues.

Sent from my SM-F916U using Tapatalk

For the straight/no taper fluted from the pics above(the profile available back in September), I only have a non calibrated bathroom scale that reads to 0.2 lbs (engineering disclaimer on accuracy) ...the 20 inch 6CM is 4.6 lbs with nut and the 24 inch 300 prc is 5.6 lbs with nut

Sent from my SM-F916U using Tapatalk

 

[bielenbm]

Dang those are heavy. Anyone know a rough cost to get them recontoured. I’d be surprised to see a mtu fluted under 3.5 lbs.

 

[KyleR1985]

Anyone have any updates on receiving, installing, or shooting their barrel?

Got shipping notification hope to have mine by end of week. 16” 6CM MTU

 

[bielenbm]

Anyone have any updates on receiving, installing, or shooting their barrel?

Got shipping notification hope to have mine by end of week. 16” 6CM MTU

When it gets to you could you weight it for me?

 

[KyleR1985]

When it gets to you could you weight it for me?

Checks notes… “not light”…

16” SS MTU no flutes. 6cm

 

[KyleR1985]

68.5 ounces. Stupid picture washed out.

 

[bojangles808]

Hoping yall don't like your women like your barrels

 

[KyleR1985]

Hoping yall don't like your women like your barrels

Haha. I like less than a blank costs to get some time behind a rifle with a new cartridge.

If it shoots, I can have it turned down and still be money ahead.

If it doesn’t, I can use it for grouper weights. Or still have it turned down and be a 100yard deer barrel.


I haven’t uncovered a correlation between preferences on barrels and women……..yet…

 

[KyleR1985]

Should be able to get to the range next weekend and see how it shoots. Torqued it up today, no issues so far cycling some rounds through.

 

[waspocrew]

Checks notes… “not light”…

16” SS MTU no flutes. 6cm


View attachment 808965View attachment 808966View attachment 808968

She's thick! Curious to see how it shoots.