Nosler Model 21

[Midnightz71]

That’s probably why they used a threaded bolt knob. That way you can switch it out to fit your needs or style. I ordered 30 mm low warne rings for a 42mm, hopefully they are here tomorrow so I can see how they fit. Either way the edge compact they used for a handle will most likely require me to pick up a triad pack due the low comb. After that I’ll be sending the rifle to Bend and hopefully I’ll have it back within a couple weeks time. We will see.

It makes contact on the skinny part of the handle not the knob. They should have used a sweeping design like mack brothers. The way it is made unscrewing the knob and replacing with aftermarket still will not clear.

 

[Midnightz71]

I was planning on using a Leupold Scope with Low Talley 1 PC Rings also. My Rifle is on the way to Nosler. Is the issue the Bolt Knob or the Bolt Handle? If it is the Knob, what is the Diameter of the Bolt Knob? The Bolt Knob is removable. Could one obtain an aftermarket Knob with a thinner Diameter?

It makes contact on the skinny part not the knob

 

[Midnightz71]

It makes contact on the skinny part of the handle not the knob. They should have used a sweeping design like mack brothers. The way it is made unscrewing the knob and replacing with aftermarket still will not clear.

 

[Oakleys]

I just got my 30mm warne low rings to use with the factory bases.

 

[kipper09]

I just got my 30mm warne low rings to use with the factory bases.

Is that a 3-9 Swfa??


Sent from my iPhone using Tapatalk

 

[Oakleys]

6x42 Mil

 

[Knoxp]

The bolt handle configuration is less than ideal.

Today is 2/8/22, last week on 2/1/22 I was told my rifle was planned to be shipped back by the end of the week. I haven’t heard a word from the fine folks at Nosler.

 

[OsagePorter]

The bolt handle configuration is less than ideal.

Today is 2/8/22, last week on 2/1/22 I was told my rifle was planned to be shipped back by the end of the week. I haven’t heard a word from the fine folks at Nosler.

I'm about to call. I've sent an email and nothing. I show they received it, but I'd like to know for sure. I would have thought several of you would have had your guns back by now

 

[JEFFERSONPET]

Just got an email from nosler about an hour ago saying that they sent it overnight to me so I should have it sometime tomorrow afternoon maybe? I’ll give y’all an update when I have it. David did say they tested it and it shot a .79 in 3 shots.

 

[OsagePorter]

Just got an email from nosler about an hour ago saying that they sent it overnight to me so I should have it sometime tomorrow afternoon maybe? I’ll give y’all an update when I have it. David did say they tested it and it shot a .79 in 3 shots.

I'm hoping it's a good update.... kind of anxious and hoping mine is back in my hands soon too!

 

[Be350ka]

Just got an email from nosler about an hour ago saying that they sent it overnight to me so I should have it sometime tomorrow afternoon maybe? I’ll give y’all an update when I have it. David did say they tested it and it shot a .79 in 3 shots.

He loves spouting group sizes. Were the three rounds loaded into the magazine and cycled to the chamber to be fired?

 

[JEFFERSONPET]

I am pissed! This company is the worst! I just got my gun back and it still has the same wyatts box and follower in it. I was told they put a new custom made on it. Guess what. They gun still does not feed or eject the 2nd and 3rd rounds and the first round is difficult. Also I didn’t expect a case of ammo but they didn’t even send a dang t shirt

 

[Oakleys]

Please be joking.

 

[OsagePorter]

I am pissed! This company is the worst! I just got my gun back and it still has the same wyatts box and follower in it. I was told they put a new custom made on it. Guess what. They gun still does not feed or eject the 2nd and 3rd rounds and the first round is difficult. Also I didn’t expect a case of ammo but they didn’t even send a dang t shirt

This is not the report I was hoping for. My gun should be back this week and I too was under the impression that they designed their own. Bottom plate and all and that is why they are being re-cerakoted for

So, assuming they never tested feeding then???? Or did someone put the wrong components back in your gun...

 

[Be350ka]

I am pissed! This company is the worst! I just got my gun back and it still has the same wyatts box and follower in it. I was told they put a new custom made on it. Guess what. They gun still does not feed or eject the 2nd and 3rd rounds and the first round is difficult. Also I didn’t expect a case of ammo but they didn’t even send a dang t shirt

I can’t say that I’m surprised. Epic fail.

 

[Knoxp]

Since they won’t say it I will…. I am sorry for all involved.

I still haven’t heard from them.

 

[JEFFERSONPET]

Please be joking.

Nope

 

[JEFFERSONPET]

I’m so mad I want to fight! How can anyone be that incompetent? My new goal in life is to let the world know how terrible they are.

 

[Knoxp]

Have you called them yet?

 

[OsagePorter]

I’m so mad I want to fight! How can anyone be that incompetent? My new goal in life is to let the world know how terrible they are.

I can’t imagine John Nosler will be happy to hear about this. I’m just baffled as I would have bet money they would have overly tested this….

Curious to see what Nosler has to say now and another trip back for your gun.

Has anyone else received theirs back?