No. Berger bullets. I've had great results from the 88 eldm in the few guns that get good accuracy from them.Just confirming, you are specifically referring to the 88gr eld-m failing to open?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
No. Berger bullets. I've had great results from the 88 eldm in the few guns that get good accuracy from them.Just confirming, you are specifically referring to the 88gr eld-m failing to open?
What twist 6 creed did you use for these?Oh these are looking to be a peach….
Through fog thick enough to barely make out the slight orange discoloration- couldn’t see the USPSA target at all.
The XC load is the load for the 115gr DTAC- no changes. The 6cm is wildly light load- nearly 200fps under where it should be.
View attachment 984000
BC isn’t an issue. 985 yards.
View attachment 984010
No. Berger bullets. I've had great results from the 88 eldm in the few guns that get good accuracy from them.
Thank you, I’m glad I clarified. I got lost there for a moment.He's talking about Bergers failing to open.
20” 6 XC? 2870 fps isn’t too bad for a heavier bullet. Can you give a rough BC of it yet?BC isn’t an issue. 985 yards.
20” 6 XC? 2870 fps isn’t too bad for a heavier bullet. Can you give a rough BC of it yet?
What twist 6 creed did you use for these?
Thoughts on the 115gr NR DtAC as a do it all bullet in a 6xc?Trued out exactly the same as the 115gr NR DTAC- .585 G1.
Is the bearing surface similar to the dtac? Or is it shorter with longer nose?Trued out exactly the same as the 115gr NR DTAC- .585 G1.
DTacs are made for David Tubbs by Sierra right? Or do I have my wires crossed?
Thoughts on the 115gr NR DtAC as a do it all bullet in a 6xc?